Reviews Precision Collet

Strong Hand, 3-Axis Fixture Vise with Quick Acting Screw, Two Stand-Offs,\Swing Away\ Arm with 4.75-Inch Miter Joint, 3.92-Inch T-Clearance - WAC45-SW

  • 5C-CB 5C Collet block set is made of superior high-speed steel. These square collet block, hex collet block have excellent wear resistance, high hardness and high precision..
  • 5C-CB 5C Collet block set is easy to be used and carried, overall dimensions: 1-3/4 x 1-3/4 x 3-1/4.
  • Capacity for standard 5C collet: 1/16 ~ 1-1/16.
  • 5C-CB 5C Collet block set is easy to quickly set up on milling machines, lathes, surface grinders and drilling machines, providing you with a simple operation experience..
  • 5C Collet block set including 1 piece of hex collet block, 1 piece of square collet block, 1 piece of quick clamping handle and 2 pieces of quick-acting rings..
Check Stock

ER11 CNC Collet 3Pcs 1/8 inch 3.175mm 4mm 6mm Spring Collet Workholding Engraving Collet Milling Lathe Tool

  • ☑【Description】-These spring collets are made of high quality 65Mn spring steel for CNC milling lathe tool and work-holding engraving machine..
  • ☑【High Quality】-This Spring Collet Fine workmanship, good elasticity, high precision and run-out tolerance is less than 0.008mm..
  • ☑【Convience】-Each collet is marked clearly so you can easily distinguish them..
  • ☑【Best Choice】-Great collet for CNC milling lathe tool and work-holding engraving machine..
  • ☑【Note】-Collet must be placed into collet chuck nut before inserting into collet chuck..
Check Stock

OrangeA Collet Set CAT40 ER32 CAT40 ER16 Spring Steel Collet Chuck Tooling Package for Milling Machine

  • Spring Steel Design: High grade spring steel frame ensures better overall balance of tool holder assembly. Durable and long lasting. Polished body to be smooth and rust resistance. 6pcs CAT40 End Mill Holders Size: 1/4", 3/8",1/2", 5/8", 3/4", 1".
  • Both ER32 and ER16 Chuck Gage or projection length is 2.75".
  • 1pcs Precision Keyless Drill Chuck 1/2 Capacity..
  • Great Accuracy & Speed: CAT40 collet chuck accuracy in Tenth. Collet Set: T.I.R.: 0.0003" or 5 um. Hardened and ground to ensure maximum accuracy. High concentricity. 6pcs CAT40 End Mill Holder in Projection Length: 2.5".
  • ER32 and ER16 Chuck Gage or projection length is 2.75". Collet Chuck of high speed is balanced to meet all industrial standard. Stable performance..
  • Multiple Collet Sizes: 12pcs ER32 collets set by 16th: 1/8".
  • 10pcs ER16 collets set: 1/32", 1/16", 3/32", 1/8", 3/16", 7/32", 1/4", 5/16", 11/32", 3/8". Special angled slots increase rigidity. Better overall balance of tool holder assembly. Use with any standard ER collet chucks for coolant-thru tool applications..
  • Effortless To Operate: Precision collet chucks are designed to be easy to use. V-groove or/and Fully ground flange say it is easy on tool changers for le....
Check Stock

Accusize Industrial Tools ER40 Collet Chuck Extension Rod, 2.56 in. Shank Length, 1 in. Straight Shank Alloy Steel, 0223-0213

  • Made of high-quality alloy steel. Hardened to HRC 56-60.
Check Stock

KEWAYO Collet Chuck Router, Router Collet Extension Chuck Converter Adapter, Extends The Router Bit an Additional 2-1/4\

  • This chuck collet made of industry grade material, high precision, strong and sturdy for long life..
  • Router bit collet use it to achieve full depth of cut when machining dovetail splines, ideal for your woodworking..
  • 2 In 1 Fuction: This router collet extension chuck accepts both 1/4" and 1/2" shank router bits for converting and extending.Suitable for woodworking trimming, milling, engraving machine..
  • Better Safety: Eliminate the dangerous temptation of withdrawing the shank from the collet, extend the bit to provide the full depth of cut instead of short shanking your router bits..
  • Router collet extension rod chuck holder extender adapter 1/2Inch shank, chuck model: ER20 1/2" & ER20 1/4"..
Check Stock

Mophorn CNC Spindle Motor CNC Spindle Kits Water Cooled Spindle Motor For CNC Router Engraving Milling Machine 2.2KW

  • Technical Parameters: Spec: φ3.15 x 8.5 in (Diameter: 8 cm x Length: 21.5 cm).
  • ER20 Standard Collet: The collet of the CNC spindle is quenched with manganese steel, and the runout is less than 0.005 mm, which has high precision....
  • Powerful Bearing: The water cooled spindle motor adopts imported bearings with high accuracy, precision, and durability. Significantly improve the....
  • Low Noise & Heat Dissipation: The dynamic balance technology can effectively reduce the noise during use. The scientifically designed water....
  • Fine Workmanship: The body of the CNC router spindle is made of high-quality stainless steel, equipped with a pure copper rotor. The upgraded version....
Check Stock

Huanyang Water Cooled CNC Spindle Milling Motor 110V 2.2KW 24000RPM 400hz Φ80mm ER20 Collet for Engraving Machine

  • 【Powerful Bearings】Adopts imported bearings with high accuracy, precision, and durability. Significantly improve the hardness and anti-rust....
  • 【High Precision Collet】ER20 Standard Collet, The collet of the CNC spindle is quenched with manganese steel, and the runout is less than 0.005 mm,....
  • 【Low Noise】The dynamic balance technology can effectively reduce the noise during use. The scientifically designed water circulation system has a....
  • 【Characteristic Advantage】Shell is cooled by liquid cycle to reduce the heat rise caused by high-speed rotation.Advanced dynamic balance....
  • 【WARRANTY ASSURANCE】Half a year warranty,you can contact us if you have any problems, we will carry out after-sales service for you.
Check Stock

Huanyang Water Cooled CNC Spindle Milling Motor 220V 2.2KW 24000RPM 400hz Φ80mm ER20 Collet for Engraving Machine

  • 【Powerful Bearings】Adopts imported bearings with high accuracy, precision, and durability. Significantly improve the hardness and anti-rust....
  • 【High Precision Collet】ER20 Standard Collet, The collet of the CNC spindle is quenched with manganese steel, and the runout is less than 0.005 mm,....
  • 【Low Noise】The dynamic balance technology can effectively reduce the noise during use. The scientifically designed water circulation system has a....
  • 【Characteristic Advantage】Shell is cooled by liquid cycle to reduce the heat rise caused by high-speed rotation.Advanced dynamic balance....
  • 【WARRANTY ASSURANCE】Half a year warranty,you can contact us if you have any problems, we will carry out after-sales service for you.
Check Stock

Dynabrade 51700 Straight-Line Pencil Grinder, 0.1 hp

  • Tool has integrated collet with 1/8-Inch Collet Insert (51659).
  • Turbine-Driven Air Motor Models are ideal for precision deburring and finishing on a variety of surfaces.
  • Housing has non-slip rubber grip for additional control. Tactile cues on shaft end alert operator to rotating collet area.
  • Changing of attachment is achieved with easy, two-wrench maneuver. Includes high-quality flexible air hose.
  • Teal Tool Cap for easy tool speed identification when using multiple models.
Check Stock

Dynabrade 51706 Straight-Line Pencil Grinder, 0.1 hp, Teal

  • Tool has integrated collet with 1/8-Inch Collet Insert (51659).
  • Turbine-Driven Air Motor Models are ideal for precision deburring and finishing on a variety of surfaces.
  • Housing has non-slip rubber grip for additional control. Tactile cues on shaft end alert operator to rotating collet area.
  • Changing of attachment is achieved with easy, two-wrench maneuver. Includes high-quality flexible air hose.
  • Red Tool Cap for easy tool speed identification when using multiple models.
Check Stock

Dynabrade 51810 Straight-Line Pencil Grinder, 0.1 hp, Silver

  • Tool has integrated collet with 1/8-Inch Collet Insert (51659).
  • Turbine-Driven Air Motor Models are ideal for precision deburring and finishing on a variety of surfaces.
  • Housing has non-slip rubber grip for additional control. Tactile cues on shaft end alert operator to rotating collet area.
  • Changing of attachment is achieved with easy, two-wrench maneuver. Includes high-quality flexible air hose.
  • Ideal for use on metals, alloys, graphite, wood, glass and resin with high glass content.
Check Stock

Collet Set for Dremel 10Pcs Replacement 4485 Brass Quick Change Rotary Drill Nut Tool Set 1/8 x 2 3/32 x 2 1/16 x 2 1/32 x 2）

  • There are four sizes of brass 4485 collet for you to choose: 1/8", 3/32", 1/16", 1/32". Please confirm the size you actually need before buying..
  • Why choose high-quality brass collet and all-metal nuts? Most of the collets used in the market are made of aluminum alloy. This material is soft and....
  • Compatible with all Dremel rotary tools and Dremel flex shaft. But except discontinued Models 1, 2, and Series 1 or earlier of discontinued Models....
  • This replacement brass collet provides a big improvement in precision and holds these tiny bits far more securely and in better alignment with the....
  • The package contains: 8pcs brass 4485 collet (1/8" x 2, 3/32" x 2, 1/16" x 2, 1/32" x 2) and 2pcs metal change collet nuts..
Check Stock

Dynabrade 51703 .1 hp Straight-Line 50000 RPM Pencil Grinder, Teal

  • Tool has integrated collet with 1/8-Inch Collet Insert (51659).
  • Turbine-Driven Air Motor Models are ideal for precision deburring and finishing on a variety of surfaces High-efficiency air motor has no wearable gears, vanes or blades.
  • Housing has non-slip rubber grip for additional control Tactile cues on shaft end alert operator to rotating collet area.
  • Changing of attachment is achieved with easy, two-wrench maneuver Includes high-quality flexible air hose.
  • Gold Tool Cap for easy tool speed identification when using multiple models.
Check Stock