Reviews Power Modulated Laser Modules

5mW 650nm Red Laser Diode Cross Module 2 Pack (Red Cross)

  • Direct Green Laser Diode for large temperature operation range. Dimensions : Ø0.255" x 0.87" (Ø6.5 x 22.1 mm).
  • This module has integrated optic, laser diode, and APC driver circuit. APC Driver Circuit enables the Laser output power safe and constant..
  • Aspherical glass lens provides tight Dot Laser in large temperature range..
  • Wavelength : 505~530 nm. Laser output power : Class IIIa - less than 4mW..
  • Beam Divergence (Half Angle) : 003c0.6 mRad. 3~6 VDC operation. Connection type : Lead wire. Please notice: laser modules are not supposed to be sold with any power source, power supply, or wiring terminals. Because modules are simply components, and it means that you have to wire it to your own power source by yourself..
Check Stock

Syongzida Twotrees TT-5.5 Laser Engraver Machine, Laser Cutter Engraving Machine DIY Laser Wood Engraver 300x400mm (20w Input Power& 5.5w Laser Power)(60% Pre-Installed）

  • 【5500mW high intensity laser head】 7.5W Output Power, can engrave different material including wood, plastic, paper, bamboo, ox Horn, leather, sponge paper,etcre motherboard with pins reserved for self-development and matching. Replaceable laser module, can install other modules to get different laser power..
  • 【60% Pre-installed】Fast assembly, save more time. Open structure motherboard with pins reserved for self-development and matching. Replaceable laser module, can install other modules to get different laser power..
  • 【Perfectly compatible system】Use LaserGRBL or LightBurn (It's the most popular paid carving software in the world, very easy to use). Supports Windows XP, 7, 8, 10(Use LaserGRBL), Mac OS, and Linux(Use LightBurn)..
  • 【Ultra-Fine Compression, Upgraded high-performance fixed-focus laser】Engraving can be done without adjusting the focal length.
  • laser power is 5W-5.5W, ultra-fine laser focal area is reduced to 0.23mm^2, The driver and nano on the motherboard are detachable, can be replaced by other chips or modules.Easy to assemble design,It only connect it to the computer, you can print any pictures your like..
  • 【Package includes】1pcs Laser Engraver DIY Kit Parts ,1pcs Power supply, 1pcs USB cable ,1pcs Safety glasses..
Check Stock

405nm 445nm 450nm Laser Diode LD Driver Board 12V 2W Step-Down Constant Current Drive Circuit of TTL Modulation Power Supply

  • Direct Green Laser Diode for large temperature operation range. This module has integrated optic, laser diode, and APC driver circuit..
  • APC Driver Circuit enables the Laser output power safe and constant. Aspherical Glass lens provides tight Dot Laser in large temperature range..
  • Dimensions : Ø0.275" x 1.03" (Ø7 x 26.1 mm).
  • Wavelength : 505~530 nm. Laser output power : Class II - less than 1mW..
  • Beam Divergence (Half Angle) : 003c0.6 mRad. 3~6 VDC operation. Connection type : Lead wire. Please notice: laser modules are not supposed to be sold with any power source, power supply, or wiring terminals. Because modules are simply components, and it means that you have to wire it to your own power source by yourself..
Check Stock

Twotrees TT-2.5W Laser Engraver,Input Power 7500 mW Engraving Machine, 60% Pre-Assembled,DIY Laser Marking,CNC Laser Engraver Kit Laser Engraving Cutting Machine,Working Size:300x400mm(2.5W Laser)

  • 2500mW high intensity laser head, 7.5W Output Power, can engrave different material including wood, plastic, paper, bamboo, ox Horn, leather, sponge paper,etcre motherboard with pins reserved for self-development and matching. Replaceable laser module, can install other modules to get different laser power..
  • 【60% Pre-installed】Fast assembly, save more time. Open structure motherboard with pins reserved for self-development and matching. Replaceable laser module, can install other modules to get different laser power..
  • 【Perfectly compatible system】Use LaserGRBL or LightBurn (It's the most popular paid carving software in the world, very easy to use). Supports Windows XP, 7, 8, 10(Use LaserGRBL), Mac OS, and Linux(Use LightBurn)..
  • The driver and nano on the motherboard are detachable, can be replaced by other chips or modules.Easy to assemble design,It only connect it to the computer, you can print any pictures your like..
  • Package includes: 1pcs Laser Engraver DIY Kit Parts ,1pcs Power supply, 1pcs USB cable ,1pcs Safety glasses..
Check Stock

Usongshine TTS-25 Laser Engraver Machine Laser Cutter Engraving Machine (7.5w Input Power& 2.5w Laser Power)（50% pre-Installed）

  • Laser power: 2.5W, machine input power: 7.5W. 50% installed , with video guide.（With laser head protection cover）.
  • Interchangeable laser module, can install other modules to get different laser powers. TT-2.5 can engrave various materials including wood, plastic, paper, bamboo, ox horn, leather, sponge paper..
  • 【Perfectly Compatible System】 Use LaserGRBL or LightBurn (It's the world's most popular paid carving software, very easy to use). Supports Windows XP, 7, 8, 10 (use LaserGRBL), Mac OS and Linux (use LightBurn)..
  • The driver and nano on the motherboard are removable and can be replaced with other chips or modules. Easy to assemble design, just plug it into the computer, you can print any picture you want..
Check Stock

seeed Studio RPLiDAR S1 Portable ToF Laser Scanner Kit - 40M Range

  • 【 TOF Ranging Method】RPLiDAR S1 adopts TOF(Time of Flight) ranging technology, which guarantees the ranging resolution not changing with the distance, the ranging resolution is till stable and accurate..
  • 【 40 Meters Range Radius】 The ranging radius of RPLIDAR S1 up to 40 meters, which meets more application requirements in larger scenarios..
  • 【 Outdoor Available】 Effectively avoiding the strong daylight interference, RPLiDAR S1 has a stable ranging and high-resolution mapping performance in outdoor environment..
  • 【 360° Omnidirectional Scan】 The ranging core of RPLIDAR S1 runs clockwise to perform a 360-degree omnidirectional laser range scanning for its surrounding environment..
  • 【 Laser Safety Standard】 The RPLiDAR S1 adopts the low power infrared laser light as its light source and drives it by modulated pulse. It reaches Class 1 Laser Safety Standard which can ensure its safety to human eyes..
Check Stock

SNAN 98 Feet Laser Level Self-Leveling Horizontal and Vertical Cross-Line Laser, Three Modules with 2 Laser Heads, Pulse Mode, Magnetic Support and Carrying Pouch, 360° Rotating, IP54

  • 【DUAL MODULES & OUTDOOR PULSE MODE】With advanced dual laser modules of great precision, you can toggle among horizontal/vertical /crossing lines freely.higher brightness and precision with less power consumption.When the pulse mode is turned on, laser tool can be used with a laser detector for working in even brighter environments or at greater working distances..
  • 【USB RECHARGE & OVERCHAGE PROTECTION】Equipped with a 2200 mAh lithium battery, it is rechargeable with overcharge protection, energy saving and safe.It can be used continuously for more than 15 hours without the need for dry batteries, which reduces energy consumption, improves work efficiency, and protects the environment..
  • 【SMART PENDULUM LEVELING SYSTEM】Press the top power button or Unlock the pendulum, tilt angle ≤ 4 °, the laser level will automatically level for horizontal/vertical/cross line.
  • If out of range, the laser beams will flash to alert.
  • Lock the pendulum, start manual mode, lock lines to fixed angles for alignment..
  • 【TWO USING WAYS TO CHOOSE】The laser level can be affixed to most metal surfaces using the magnetic bracket (included) , or mounted onto a tripod of 1/4" size, turning around at 360° freely and projecting laser lines in any position or angle..
Check Stock

Acxico 2Sets Laser Sensor Module For Arduino AVR(KY-008 Laser Transmitter +Laser Receiver Sensor Module Non-modulator Tube)

  • Model: 1*Laser Receiver Sensor Module+ 1* KY-008 Laser Transmitter Module.
  • Laser Receiver Sensor Module uses the non modulated laser receiver, please use in the room where without the light, the sunlight or other lamps and lanterns will interfere, suggested in the dark environment use..
Check Stock

SainSmart FL55 Laser Module 455nm Blue-Violet Light Fixed Focus Laser Module Kit for Genmitsu CNC Machine 3018-MX3/3018-PROVer

  • Application: The laser module is ideal for engraving, cutting, scribing, and drilling. Desired patterns can be made easily on the wood or plastic by this unit. This module is only compatible with 3018-MX3/3018-PROVer, but not compatible with 1810-PRO/3018/3018-PRO..
  • Fixed Focus: The fixed focus distance is 20mm. Compared with the adjustable focus laser module, the light spot of the fixed focus laser module is smaller. At the same power, the fixed focus laser module can cut 3mm linden wood in one pass, not possible with current adjustable laser modules..
  • Longer Service Life: The fixed focus laser module can work at full power for 8 hours without any light decay. The service life can be up to 10,000 hours..
  • Excellent Heat Dissipation: Equipped with a large aluminum heatsink and cooling fan, this can help the heat dissipate fast and ensure the laser module works continuously..
  • Industrial Grade Design: It is designed for industrial laser engraving machines, it adopts an intelligent feedback control circuit, external ACC constant current driving Mode. Featuring reliability, high stability, high efficiency, low noise, and excellent laser beam quality..
Check Stock

Laser Level HYCHIKA 150Ft Self-Leveling Green Laser Level for Outdoor Dual Modules with 2 Laser Heads Horizontal Vertical Cross Line USB Recharge Laser Tool with 360° Magnetic Bracket Carry Bag

  • 【Dual Laser Modules & Self-leveling within 4°】Dual laser modules allow users can select cross lines, horizontal or vertical line by one button....
  • 【3 in 1 Laser Level and wide Application】The laser level provides 3 line patterns-vertical, horizontal and cross line laser with the maximal laser....
  • 【Compact Size and High Protection Grade】 It's compact and lightweight for easy gripping. The line laser reaches IP54 protection grade (shock....
  • 【Flexible Magnetic Support and Rechargeable 1200mAh battery】The Laser Level can be affixed to most metal surfaces with the magnetic retainer or....
  • 【Package Include】1 * HYCHIKA Green Laser Level, 1 * L-shaped Magnetic Bracket, 1 * USB Charging Cable, 1 * Carry Case, 1 * User Manual..
Check Stock

Laser Level, HYCHIKA 50 Feet Cross Line Laser with Dual Modules, Switchable Self-Leveling Vertical and Horizontal Line Construction Picture Hanging, Carrying Pouch, Battery Included

  • 【Dual Laser Modules & Self-leveling within 4°】Dual laser modules allow users can select cross lines, horizontal or vertical line by one button operation. The self leveling laser level will be automatically leveled in 6S when tilt angle≤4°. Locking the pendulum initiates manual mode which locks the lines for manual alignment at other angles..
  • 【3 in 1 Laser Level and wide Application】The laser level provides 3 line patterns-vertical, horizontal and cross line laser with the maximal laser visibility reaching 50 feet. Suitable for wide uses: such as paving tiles, installing carpentry for doors, windows or furniture, hanging wallpaper, etc. But not suitable for outdoor use..
  • 【Compact Size and High Protection Grade】 It's compact and lightweight for easy gripping. The line laser reaches IP54 protection grade (shock resistant, waterproof, dustproof, shockproof, wear resistant, impact resistance, cold and high temperature.). It's compact and lightweight for easy gripping, but large enough to sit stably, ideal for construction site work..
  • 【Flexible Magnetic Support and 20H Battery Life】The Laser Level can be affixed to most metal surfaces with the magnetic retainer (included) or mounted on a 1/4 " - 20 tripod (not included) . The line laser ca....
Check Stock

Dexarm Luxury - All-in-one Desktop Robot Arm - Laser Engraver, Laser Cutter, 3D Printer and Pen Holder - High Precision and Expansibility - A Versatile Robotic Arm Machine

  • ALL-IN-ONE ROBOT ARM - Dexarm Maker is versatile and can do it all alone. This smart desktop arm has multiple uses: 3d printing, drawing and writing, picking and placing and is also a laser cutter and engraver machine. (2.5 W).
  • FIVE SWITCHABLE MODULES - Easy to attach changeable modules with just one click. No need for screws and cables when using this intelligent product. You can purchase accessories for the Luxury Dexarm such as Safety Enclosure (ASIN B09Q53XYL1), Sliding Rail (ASIN B09Q56YRBC) & Mini production line (ASIN B09Q5QZZY2) by looking for the Product Name & ASIN in the search bar.
  • EASY TO USE SOFTWARE - The table robotic arm comes with free interactive software that brings your ideas to reality in just a few clicks. A complete DIY kit.
  • COLORFUL TOUCHSCREEN - The 3.5-inch touchscreen of this robotic arm kit allows you to check the status and command Rotrics within your hand.
  • 0.05mm HIGH PRECISION - Patented decelerator design reduces the gap between gears, allowing 0.05mm extremely high repeatability. Perfect for industrial applications. 2500 mW Laser Class 4. P....
Check Stock

CenryKay 5V 650nm 6mm 5mW Red Dot Laser Head Red Laser Diode Laser Tube Pack of 20

  • 5V 650nm 5mW Red Dot Diode Laser Head Red Laser Diode 6mm Red Laser Diode Laser Head.
  • Laser Modules Wavelength: 650nm. Working Voltage: 5v.
  • Application: Level instrument, Ground instrument, Long distance laser listener remote light control, Long distance laser wireless communication.
Check Stock