Reviews Potentiometer Motor Control

Acxico 1Pcs DC12V 30A High-Power Brushless Motor Speed Controller DC 3-Phase Regulator PWM Controller Driver

  • With micro single-chip system, this speed control can achieve simple system programming, which can suit better high-speed high-power brushless motors..
  • Safety Startup: To avoid any injury, the motor will not start up immediately if the potentiometer of speed controller is not at the lowest gear, which is necessary for high-speed high-power motor to protect user's safety..
  • Temperature Protection: The speed control has aluminum heat sink, which allows it work at 30 A continuously. When temperature reaches 110 celsius degree, temperature detect system will send a protection signal and system will auto decrease 60% power output to protect speed control and motor. It will back to normal power after temperature is decreased. To protect the actuator module, please dissipate heat during long-time using..
  • The signal loss prevention: Auto shut down when there is no signal detected from PWM signal generator(potentiometer )..
  • Power Identification System: The speed control has power identification system, which is designed for high-speed high-power motors such as in model plane. It is not suitable for low-power brushless motors..
Check Stock

PWM DC 6-60V 12V 24V 36V 48V 30A 1500W PWM DC Motor Speed Controller Speed Adjustable Stepless Governor Regulator, Motor Speed Controller with Start Stop Switch with Digital Display

  • ☞ 【Premium quality】made with high quality circuit board which ensures a longer service life.and this simple and easy-to-use DC motor speed controller has an stable performance..
  • ☞ 【Product introduction:】The motor speed controller uses screw terminals for convenient and quick wiring. It is equipped with an instantaneous start/stop switch and a speed control potentiometer..
  • ☞ 【Seller's warm tips: 】1. The digital display is the percentage non-motor actual speed.
  • 2. The input voltage must be divided into positive and negative, can not input 220V household electricity, the input voltage should be equal to the rated voltage of the motor (6-60V), such as the rated voltage of the motor 12 input 12V motor 36V input 36V motor..
  • ☞ 【Speed Controller Features】Comes with a momentary start/stop switch and a speed control potentiometer..
  • ☞【After-sales service guarantee】Thank you for your support. We care about customers and ensure that buyers get what they want. We hope to provide customers with value-for-money services. If there is any quality problem, please contact us in time. Thank you..
Check Stock

Hoverboard Morning

  • Motor Speed Controller Brushless Controller with Hall-less.Full SMD process,stable performance,humanized design, interface all adopts terminal blocks..
  • "Voltage 5-50V high power 380W DC three-phase high-speed brushless sensorless controller. ".
  • Standard heat sink,onboard speed regulating potentiometer，you can use it when you have power on..
  • DC three-phase high-speed brushless sensorless controller recognizes PWM signal input, amplitude 3-5V supports PLC0-5V analog quantity, input control.
  • "Size-Length 63MM * width 45MM * height 31MM,Over-temperature protection:yes (half the over-temperature power) Maximum speed:224000 RPM (2 pole motor),74000 RPM (6 pole motor),40000 RPM (12 pole motor), 35000 RPM (14 pole motor).".
Check Stock

Laing E10-NSHNDNN2W-08 Spa Circulation Pump Black

  • High density ceramic bearing ball and graphite impeller bearing cap designed for high efficiency and long life..
  • Highly efficient and ultra quiet spherical motor design. Pump is designed for continuous operation. All ratings are within working limits of the motor.
  • Unique patented design has no mechanical seal which is a potential leak path..
  • Embedded microprocessor control is self-regulating and available with variable speed dial control (potentiometer) on the pump or as an optional PWM....
  • Built in DRY RUN protection is programmed into the software to help eliminate motor and pump damage if the pump is ran w.
Check Stock

DZS Elec 10A 12V-40V DC Motor Speed Controller 12V 24V PWM Variable Speed Regulator Governor Switch CCMHCN With Speed Control Knob

  • Type: DC 10A 12V-40V motor speed controller, high efficiency, high torque, low heat radiation..
  • Function: With power supply reverse polarity protection, over-voltage protection, 10A standard fuse over-load protection, more safer and reliable..
  • PWM Duty Cycle: 10%-100%, Control Power: 0.01-400W, adopting variable speed knob potentiometer to control motor speed..
  • Rated Current: 8A, Max Current: 10A, Quiescent Current: 0.02A (Standby).
  • Applications: Suitable for DC motor speed control, PLC speed control etc..
Check Stock

Laing E10-NSHNDNN2W-02 Spa Circulation Pump

  • High density ceramic bearing ball and graphite impeller bearing cap designed for high efficiency and long life. E10-NSHNDNN2W-02 only supports 230VAC..
  • Highly efficient and ultra quiet spherical motor design. Pump is designed for continuous operation. All ratings are within working limits of the motor.
  • Unique patented design has no mechanical seal which is a potential leak path..
  • Embedded microprocessor control is self-regulating and available with variable speed dial control (potentiometer) on the pump or as an optional PWM....
  • Built in DRY RUN protection is programmed into the software to help eliminate motor and pump damage if the pump is ran w.
Check Stock

Motor Controller, DROK PWM DC Motor Speed Controller 10-50V 60A High Power HHO RC Driver PWM Controller Module 12V 24V 48V 3000W Extension Cord with Switch

  • Parameter: DROK DC motor controller operating voltage range is DC 10-50V, max rated current is 60A, control power range is 0.01-3000W, working temperature range of -20℃-40℃..
  • High-end Configuration: Our motor driver control board uses PWM modulation system to adjust light & speed. In addition, it is designed with radiators to doing heat dissipation created by MOS tube..
  • Convenient Speed Control: With wires to connect potentiometer and regulation switch to control the speed, it is convenient to use..
  • Low Quiescent Current: our speed regulation module is designed with low quiescent current 0.04A(When the working voltage is DC10V-50V, the quiescent current cannot exceed 40mA)..
  • Wide Application: our motor driver control board can be applied to universal DC brush motor speed regulation.
  • production line conveyor belt speed regulation.
Check Stock

OCR 1K-500K ohm Potentiometer Kit 35 Sets Knurled Shaft Linear Potentiometer with Knobs Nuts and Washers 7 Values 1K 5K 10K 20K 50K 100K 500K 3 Terminal Rotary Potentiometer

  • ✅ Top adjustment type and knurled shaft single linear 3 terminal 7 values 1K 5K 10K 20K 50K 100K 500K Ohm rotary potentiometer..
  • ✅ Linear knurled shaft potentiometer. Shaft diameter:6mm, shaft length:17mm.
  • Mounting thread diameter:6mm, base size:16*7mm.
  • ✅ Potentiometer kit offers 35pcs potentiometer knob caps. 300 degree rotary knob for easily control the potentiometer..
  • ✅ Top adjustment type and knurled shaft for easy operate in daily use time. Stander round shaft can be push on potentiometer easily..
  • ✅ Taper potentiometer used for volume control of audio sets, car radios, amplifiers, mixers, synthesizers and other appliances. For electronic....
Check Stock

PWM DC Motor Speed Controller, Stepless Speed Control Switch Controller 30A DC6-60V 12V 24V 36V 48V

  • 【convenient screw terminals】 This motor speed controller uses screw terminals for convenient and quick wiring. Support motor: DC brush motor..
  • 【momentary start/stop switch】 Momentary start/stop switch and a speed control potentiometer..
  • 【digital display】 Motor regulator 12v designed with a digital display that shows the rate in percentage of actual speed to maximum speed..
  • 【stable】 This simple and easy-to-use DC motor speed controller has an stable performance. The PWM DC motor controller has a continuous current of 20A..
  • 【high quality circuit board】 Speed controller is made with high quality circuit board which ensures a longer service life..
Check Stock

KST DS215MG Micro Digital Servo

  • 100% NEW brand,high quality. Stall Torque (4.8V): 17.5oz /in (1kg/cm).
  • It is tiny and lightweight with high output power..
  • Compatible with the project like Robot Arm/ Robot hand/ control the servo with potentiometer/ multi servo control..
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats..
Check Stock

KeeYees 7-70V 30A PWM DC Motor Speed Controller Switch Control 12V 24V 36V 48V with 30 Amp Fuse

  • 【Wide Voltage】: Wide voltage input 7-70V, maximum output current 30A (Please refer to the recommended power range for actual use current. It is recommended that 12V within 250W, 24V within 350W, 48V within 450W, and 60V within 500W. ).
  • 【Speed Control Knob】: The knob has a switch function, which can control the motor speed from 0% to 100%. Adjustable potentiometer flexible cable can be separated, the cable length is 15CM..
  • 【30A Fuse】: This set contains a 30A fuse to prevent shorting of the motor interface. Double protection of your Motor and Motor Speed Controller..
  • 【Note 1】: The power of the input power supply must be greater than 1.5 times the rated power of the motor to make the motor work (note: the input voltage and the rated voltage of the motor must be consistent)..
  • 【Note 2】: If there is a forward-reverse circuit regulator on the children's car, please be sure to connect the speed controller between the power supply and the forward -reverse circuit regulator of the children's car. Otherwise, the speed controller may be damaged..
Check Stock

MEGA 2560 Starter Kit Ultra (100% Arduino IDE Compatible) w/ Battery Holder, Sensors, Modules, Resistor kit and Components (no Supply)

  • -10 * LEDs 5mm Diffused RED -10 * LEDs 5mm Diffused GREEN -10 * LEDs 5mm Diffused YELLOW -5 * LEDs 5mm Ultrabright WHITE diffused -3 * LEDs 5mm Red / Green / Blue Diffused RGB -Shift Register (Series to Parallel IC) 74HC595 - NPN Transistor BC547 - PNP Transistor BC557 - Adjustable Knob Resistor 1kOhm (Potentiometer) - Adjustable Knob Resistor 10kOhm (Potentiometer).
  • - Resistor Pack 1/4W 1% accuracy, with 10pz of each value: 100, 220, 330, 470, 1K, 2K2, 4k7, 10K, 22K, 47K, 100K, 220K, 1M - 40-pin header 2.54 mm -40-pin header at right angle 2.54mm -5 * Capacitors for bypass tantalum 0.1uF -5 * Jumpers for header.
Check Stock

mxuteuk 2PCS 12V/24V DC Motor Speed Controller Switch Universal Electronic Stepless Speed Regulator Switch for Car Truck Fan Heater Control M-H-002

  • [Controller & Driver] Integrated step motor controller and driver functions.It can not only realize the drive motor, but also control the working state of the stepper motor in real time.
  • [Forward & Reverse] It can not only change rotation direction by pressing button, but also by potentiometer. It is also automatically change the direction through the selected working mode to achieve multi-scene and multi-application.
  • [4 Control Mode] In addition to its built-in parameters work mode,it can also control by external buttons or others driver or UART commands.
  • [9 work states] Built-in 9 default workflow programs, covering most applications, to meet the needs of different scenarios.Forward/Reverse/Delay/Loop/Self-locking/No-lock/Rotating speed and so on.
  • [HD LCD display] The HD LCD can clearly display the speed/delay/cycle times, making it easier to browse and set various parameters. Realize high-precision control of the motor. Parameters support memory function that will not be lost.
Check Stock