Reviews Control 12v Dc Motor

50240401000Q 5304498691 Refrigerator Fan Motor ZWF-02-4 DC 12V 4W 2100RPM

  • 50240401000Q 5304498691 Refrigerator Fan Motor ZWF-02-4 DC 12V 4W 2100RPM.
  • 50240401000q for refrigerator fan motor zwf-02-4 dc12v 4w 2100rpm.
  • repalce part number: 5304498691  50240401000Q.
  • zwf-02-4 fan motor Voltage: DC12V zwf-02-4 50240401000q Power: 4W .
  • Model: ZWF-02-4,50240401000Q 5304498691 Speed: 2100RPM.
Check Stock

PWM DC Motor Speed Controller, Stepless Speed Control Switch Controller 30A DC6-60V 12V 24V 36V 48V

  • 【convenient screw terminals】 This motor speed controller uses screw terminals for convenient and quick wiring. Support motor: DC brush motor..
  • 【momentary start/stop switch】 Momentary start/stop switch and a speed control potentiometer..
  • 【digital display】 Motor regulator 12v designed with a digital display that shows the rate in percentage of actual speed to maximum speed..
  • 【stable】 This simple and easy-to-use DC motor speed controller has an stable performance. The PWM DC motor controller has a continuous current of 20A..
  • 【high quality circuit board】 Speed controller is made with high quality circuit board which ensures a longer service life..
Check Stock

Liftmaster 041D1624-2 DC Motor with Mounting Bracket Replacement Kit 12V Openers

  • Liftmaster 041D1624-2 DC Motor with Mounting Bracket Replacement Kit 12V Openers.
  • 041D1624-2 is a DC Motor with Mounting Bracket Replacement Kit.
  • specific for 12V systems. This motor kit is for use with various LiftMaster Wall-Mounted Garage Door & Light-Duty Commercial Door Openers..
  • This 12V DC Motor Kit is compatible with the following LiftMaster Models: 8500W, 8500WLA, LJ8900W and LJ8950W.
  • Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility..
Check Stock

DC Motor Driver, DROK L298 Dual H Bridge Motor Speed Controller DC 6.5V-27V 7A PWM Motor Regulator Board 12V 24V Electric Motor Control Module Industrial 160W with Optocoupler Isolation

  • DROK DC motor driver input voltage range is DC 6.5V-27V, can be input DC 12V or 24V, rated output current of each port is 7A, total output power is 160W..
  • STRONG DRIVE: the motor controller board adopts dual H bridge, can drive two DC motors at the same time..
  • FORWARD and REVSERSELY ROTATE: the IN1, IN2/IN3, IN4 port can control forward or reverse motor rotation..
  • PWM SPEED CONTROL: enable signal terminal (ENA) input PWM can regulate speed, PWM frequency range 0-10KHZ..
  • UNDER VOLTAGE PROTECTION: the motor driver module is with under voltage protection to prevent instantaneous large current from damaging the module..
Check Stock

Riorand DC 3V 6V 12V 24V 35V 5A Motor Speed Controller PWM Speed Control Ultra Small LED Dimmer（2PCS）

  • Speed Control Switch Low Voltage DC 3V 5V 6V 12V 5A.
  • Motor Speed Controller with a self-recovery fuse 5A and a Power-On LED light.
  • Provide a continuous current of 5A to your DC brush motor or other DC load.
  • This mini controller will be disconnected automatically if the current is too large and the fuse will recover automatically after cooling.
  • Please just contact me by email if there are any issue and I will solve it within 24 hours.
Check Stock

Mini Electric Motor 30W Permanent Magnet DC Motor 12V/24V High Speed CW/CCW (DC 24V 6000RPM)

  • Permanent magnet dc motor high speed with long output shaft,easy to install..
  • DC 12V 3000RPM or DC 24V 6000RPM,2 size for your choice..
  • The stator windings of the motor are copper wire, low heat, low loss, long life,and with CW/CCW control..
  • Widely used in cotton candy machine, small cutting bench, grinding machine, medical equipment and other mechanical equipment..
  • Mini Size- Motor body (Diameter x Height) 5.1cm/2 inch x 7.1cm/2.8 inch..
Check Stock

8PCS L298N Motor Drive Controller Board Dual H Bridge DC Robot Stepper Motor Compatible with Ardu-ino Electric Projects, Smart Car Robot

  • Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
  • The L298N driver module, using L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface, you can chip circuitry to 5V power supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential..
  • Terminal driver part of the supply area VMS: +5V ~ +35V.
  • Drive part of the peak current Io: 2A / Bridge.
  • Logical part of the terminal power supply range Vss :4.5-5 .5V.
  • Logical part of the operating current range: 0 ~ 36mA.
  • The control signal input voltage range: 4.5-5.5V low 0V high.
  • To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
  • High working power to 46v, large current can reach 3A MAX and continue current is 2A, power to 25w..
  • Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability, large capacity filter capacitance,afterflow protection diode, more stable and reliable..
Check Stock

Liftmaster LA400PKGU Dual Swing Gate Opener Kit, Battery Backup, Receiver & Photocell, Gate Sensor Included!

  • Powerful Gate Opener: Motor Voltage: DC 24V.
  • The powerful actuator is made of steel and IP44 level protection for outdoor use. Pass tests of CE & ETL. Note: You need to purchase 2 of 12V batteries for use. (NOT INCLUDED).
  • Remote Controller: The electric gate opener is equipped with a remote controller(Control Distance: 65-98 ft). You can drive in the car and control the gate opening or closing with the RC. It will auto close the gate after the 60s without any operation. Keep home safe for you..
  • Push/Pull-to-open Install: Our single swing gate opener is compatible with two-way door installation: push-to-open & pull-to-open. Perfect for all gate types includes chain link, tube, panel, vinyl, and wood. It is designed for gates up to 11.8 ft long and 308 lbs/leaf..
  • Protections & Indicator: This gate opener has a flashing red light for indication, and warning placards on both sides of the door. Open the door with a release key when powering out..
  • Diverse Use Places: Perfect for home, yard, farm, factory, company, villa, community, agricultural, farm, ranch, etc. Note: A DC 24V battery or 2pcs of DC 12V batteries(not included) are required to power the gate opener..
Check Stock

Low Voltage Dc 1.8v 3v 5v 6v 12v 2a Motor Speed Controller PWM 2PCS

  • Speed Control Switch Low Voltage DC 1.8V 3V 5V 6V 12V 2A.
  • Motor Speed Controller with a self-recovery fuse 2A and a Power-On LED light.
  • Provide a continuous current of 2A to your DC brush motor or other DC load.
  • This mini controller will be disconnected automatically if the current is too large and the fuse will recover automatically after cooling.
  • Please just send us an email if there is any issue and we will solve it within 24 hours.
Check Stock

DC Motor Speed Controller Universal DC 12V 24V 10A Electronic Stepless Speed Regulator Switch for Car Truck Fan Heater Control

  • 【Universal】Voltage 12V or 24V. Overload current: 10A. Supports high power, 12V/120W, 24V/240W.
  • 【Features】Easy to adjust and control speed of DC motor, simple wiring and convenient to use, a great replacement for broken one. Extra long knob screw to meet installation needs.
  • 【Wiring】Red wire connected to the positive pole of power supply and motor, blue wire connected to the negative pole of motor, black wire connected to the negative pole of power supply.
  • 【Heat dissipation】This electronic stepless speed controller is a upgraded fan heater controller with heat sink that will ensures a better heat dissipation.
  • 【Application】Widely used for 12-24V DC electric appliances. Adjust motor speed, automobile fan heater control, defroster, fans speed regulation, etc.
Check Stock

Fencia DC Motor Speed Control PWM Controller 10V-50V 5000W MAX 100A + Pedal Accelerator

  • ⭐ Larger current, max current up to 100A, continuous operating current of up to 60A. Power requirement: DC 10-50V, frequency: 15khz, control motor power: 0.01-5000w..
  • ⭐ Reversing control motor, dual relay control, can withstand higher current. Programmable to meet subsequent extensions..
  • ⭐ With soft start to reduce the shock of large current when the motor starting. With brake when the power off or change the rotation of the motor..
  • ⭐ Quiescent current: 0.04a, regulation range: 0-100%, size: 145*78*38mm/5.7*3.07*1.49in..
Check Stock

Tnuocke 12V/24V DC Motor Speed Controller Universal,Knob Screw Electronic Stepless Speed Regulator Switch,Adjustable Motor Speed, Automobile Fan HeaterControl, Defroster, Fans Speed Regulation

  • 【About DC motor】Voltage 12V or 24V. Overload current: 10A. Supports high power, 12V/120W, 24V/240W.
  • 【High quality】This electronic stepless speed controller is a controller with heat sink that will ensures a better heat dissipation.Easy to adjust and control speed of DC motor,knob screw convenient to use.
  • 【Product size】length 86.8mm/3.42in,wide 32mm/1.27in,high 35mm/1.39,wire length is 120mm/4.7in.
  • 【Way of connection】Red wire connected to the positive pole of power supply and motor, blue wire connected to the negative pole of motor, black wire connected to the negative pole of power supply.
  • 【Wide use】Widely used for adjust motor speed, automobile fan heater control, defroster, fans speed regulation, etc..
Check Stock

CHANCS TYC-50 Synchronous Motor 12V DC 5-6RPM CW/CCW 4W Electric Gear Motor For Christmas Decorations

  • Model : TYC-50； Shaft Diameter: 7mm ； Shaft Length: 16mm； Direction : CCW/CW(uncontrollable)； Voltage : DC 12V； Speed : 5-6RPM； Power :....
  • This is a TYC-50 DC 12V 5-6RPM synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is....
  • Widely used in hand-made, school project, electric fan shake heads, heaters, Christmas tree, prayer cylinders, air conditioners, microwave ovens, glue....
  • Motor shaft, line length, speed, voltage can be designed according to customer requirements. If you need other models of motor, you can contact us.....
  • Attention: The applicable voltage of this motor is DC 12V, using AC power supply, the motor does NOT work.
  • too high voltage will burn the motor.If you....
Check Stock