Reviews Portable Axle Wheel Scale

Bruder Toys Land Rover Defender Station Wagon

  • Drivers cabin made with transparent high quality polycarbonate and the doors can be opened.
  • Doors, tailgates and hood can be opened, while hood support allows for realistic engine block viewing.
  • Spare wheel on tailgate, removable rear bench seat, chasis has removable drawbar coupling and includes a front (steerable) and rear axle suspension.
  • Additional steering rod allows steering through sliding roof.
Check Stock

Rippin Moto Billet Axle Block Chain Adjuster | Compatible with KTM & Husqvarna Motorcycles

  • Rippin Moto billet axle blocks make changing and aligning your rear wheel quicker and easier with a laser etched scale to help with proper axle alignment and chain tension..
  • Machined from billet 6061-T6 aluminum and coated in corrosion resistant anodized finishing for long life..
  • Weight: 100g | Material: 6061-T6 Aluminum.
  • COMPATIBLE WITH KTM & HUSQVARNA MODELS: KTM 85 SX 2003-2014 | KTM 125-530 SX/SX-F/XC/XC-F 2000-2012 | KTM 125-530 EXC/EXC-F/XC-W/XCF-W 2000-2020 | Husqvarna TC85 2014 | Husqvarna TC125 2014-2015 | Husqvarna TC250 2014-2016 | Husqvarna TX125 2017-2018 | Husqvarna FC250/350/450 2014-2015 | Husqvarna TE/FE 125-501 2014-2020 | For Husaberg | Husaberg TE 125-300 2008-2014 | Husaberg FE 250-570 2008-2014.
  • IN THE BOX: 1 Pair Rippin Moto CNC Billet Axle Blocks.
Check Stock

INJORA RC Axle Metal Front and Rear Portal Axle with Protector for 1:10 RC Crawler Car Axial SCX10 & SCX10 II 90046 90047(Silver)

  • The INJORA Portal Axle creates extreme amounts of ground clearance under the center of your axle..
  • Diamond-shaped pumpkin for increased clearance a more realistic, scale look..
  • Optimized gear ratio – 3.75 compared. This reduces torque twist which is typically seen with other small pumpkin axle designs..
  • Come with protect armor, servo arm, 12mm wheel hex, nuts and screws, easy to install..
  • Hardened steel gears and drive shaft, use all SCX10-II linkage, suit for 1/10 RC Crawler Car Axial SCX10 II 90046..
Check Stock

Pinewood Pro PRO Axle Inserter Guide from for Inserting axles in Pinewood Blocks

  • Easily align derby car axle in pre-cut slot and get perfect wheel spacing with one-piece axle guide.
  • Axle Guide rib is concave so your axle slides straight in.
  • Thumb depression makes it easy to hold Axle Guide in place.
  • Wheel spacer gives you the perfect wheel spacing to avoid wheel wobble.
  • One piece construction with built-in wheel spacer. No extra tools needed..
Check Stock

INJORA RC Axle Metal Front and Rear Portal Axle with Protector for 1:10 RC Crawler Car Axial SCX10 & SCX10 II 90046 90047 Upgrade Parts(Black)

  • The INJORA Portal Axle creates extreme amounts of ground clearance under the center of your axle..
  • Diamond-shaped pumpkin for increased clearance a more realistic, scale look..
  • Optimized gear ratio – 3.75 compared. This reduces torque twist which is typically seen with other small pumpkin axle designs..
  • Come with protect armor, servo arm, 12mm wheel hex, nuts and screws, easy to install..
  • Hardened steel gears and drive shaft, use all SCX10-II linkage, suit for 1/10 RC Crawler Car Axial SCX10 II 90046..
Check Stock

Thrustmaster TS-XW Racer Sparco P310 Competition Mod XBOX Series X/S XOne & Windows

  • The TS-XW Racer is a 1:1 scale replica of the Sparco P310 Competition wheel, and is officially licensed for Xbox Series X/S, One and Windows (PC).
  • Works on Xbox Series X/S, XBOX One and PC.
  • The wheel employs Force Feedback via a powerful 40-watt brushless servomotor with Motor Cooling Embedded cooling system (patent pending), for constant....
  • The wheel incorporates a dual belt-pulley system, along with an axle mounted on metal ball-bearings for extremely smooth performance.
  • The wheel’s pedal set is large, solid and adjustable, with 100% metal pedals and internal structure. It also includes an innovative Conical Rubber....
Check Stock

ABN Axle Nut Socket, 36mm, 1/2in Drive, 6 Point – Universal for All Vehicle 6pt Installation, Removal, Repair

  • ...ck with your ratchet, breaker bar, impact wrench, or torque wrench.
  • Spindle axle nut socket set will fit standard 1/2-inch socket wrench drives.
  • [Output Shaft Length]: Output shaft of this front axle socket set axle nut kit 1-pack has a 1/2-inch deep socket drive.
  • Fit this wheel bearing socket set 1-pack into various axle lengths for your trucks, sedans, cars, motorcycles, and more.
  • [Fit For Your Vehicle]: Axle hub socket set 1-pack will fit most 4-wheel drive and front wheel drive automobiles.
  • Wheel bearing locknut socket set is compatible with vehicles such as GM X, J and A body style cars, Dodge Neon, Chevrolet Cobalt.
Check Stock

ABN Axle Nut Socket, 34mm, 1/2in Drive, 6 Point – Universal for All Vehicle 6pt Installation, Removal, Repair

  • [Perform Maintenance with Ease]: When it comes to removing, installing, and repairing hub or axle nuts on your vehicles, depend on the ABN Axle Nut Socket Set.
  • Impact axle nut socket set includes 1 34mm axle socket nut.
  • [Built to Last]: No need to worry about this large axle nut socket set 1-pack cracking under the pressure.
  • Axle impact socket set is constructed from chromium-molybdenum steel (CR-MO) for strength and longevity.
  • [For Your Tools]: Use this axle nut impact socket set 1-pack with your ratchet, breaker bar, impact wrench, or torque wrench.
  • Spindle axle nut socket set will fit standard 1/2-inch socket wrench drives.
  • [Output Shaft Length]: Output shaft of this front axle socket set axle nut kit 1-pack has a 1/2-inch deep socket drive.
  • Fit this wheel bearing socket set 1-pack into various axle lengths for your trucks, sedans, cars, motorcycles, and more.
  • [Fit For Your Vehicle]: Axle hub socket set 1-pack will fit most 4-wheel drive and front wheel drive automobiles.
  • Wheel bearing locknut socket set is compatible with vehicles such as GM X, J and A body style cars, Dodge Neon, Chevrolet Cobalt.
Check Stock

ABN Axle Nut Socket, 35mm, 1/2in Drive, 6 Point – Universal for All Vehicle 6pt Installation, Removal, Repair

  • [Perform Maintenance with Ease]: When it comes to removing, installing, and repairing hub or axle nuts on your vehicles, depend on the ABN Axle Nut Socket Set.
  • Impact axle nut socket set includes 1 35mm axle socket nut.
  • [Built to Last]: No need to worry about this large axle nut socket set 1-pack cracking under the pressure.
  • Axle impact socket set is constructed from chromium-molybdenum steel (CR-MO) for strength and longevity.
  • [For Your Tools]: Use this axle nut impact socket set 1-pack with your ratchet, breaker bar, impact wrench, or torque wrench.
  • Spindle axle nut socket set will fit standard 1/2-inch socket wrench drives.
  • [Output Shaft Length]: Output shaft of this front axle socket set axle nut kit 1-pack has a 1/2-inch deep socket drive.
  • Fit this wheel bearing socket set 1-pack into various axle lengths for your trucks, sedans, cars, motorcycles, and more.
  • [Fit For Your Vehicle]: Axle hub socket set 1-pack will fit most 4-wheel drive and front wheel drive automobiles.
  • Wheel bearing locknut socket set is compatible with vehicles such as GM X, J and A body style cars, Dodge Neon, Chevrolet Cobalt.
Check Stock

Aimrock 17mm Hex Wheels and Tires RC Monster Truck Tire and Rims w/Foam Inserts for 1/8 Arrma Kraton HSP HPI Losi 1/10 Traxxas Maxx E-Revo, 4PCS

  • 17mm hex wheel and tire set fits for 1/8 Scale Arrma Kraton Redcat HSP HPI Losi, 1/10 Traxxas Maxx E-Revo rc monster buggy truck car. KINDLY NOTE: If you want to install this set in 12mm hex 1/10 scale rc trucks, you have to buy 12mm to 17mm wheel hex extension adapters in adavance.
  • Tire Features: Unique Lugs meet your extreme requirement for all terrain and incredible traction on Grass, Dirt, Muddy, Loose material and more. Made from Qualified Rubber, Improved Wear Resistance and Long-Lasting Performance. Wheel Features: Made of High-strength Nylon Material, More Durable for Bashing. Integral Foam Insert, Improved Resilience between Wheel and Tires.
  • Pre-Mounted Wheel and Tire Set, Save your time for gluing, More time for Having fun. The Oversized shredding Lugs offer you great Gripping in Grass, mud, dirt and loose material. Better traction, Improved wear resistance, A must Wheels and Tires Combo for Beginner Bashers.
  • Package Included: 4 x Wheel and Tire Sets (Pre-mounted).
Check Stock

Spline Wheel Rear Axle Hub, 2Pcs 17T Steel Alloy Spline Wheel Hub, 3 Stud Wheel Hub for Quad Bike ATV Go Kart 50cc 110cc

  • 【Scope of Application】 Spline rear wheel axle hub is suitable for four-wheel motorcycle ATV Go kart 50cc 110cc, very suitable for replacing old or damaged spline wheel hub..
  • 【Long Service Life】Spline wheel hub is made of high-hardness steel alloy, and the surface is coated with golden paint, which has abrasion resistance, corrosion resistance and oxidation resistance, and has a long service life..
  • 【Good Transmission Performance】 Wheel rear axle hub is used for 17T 3 stud spline wheel rear axle hub, which can bring better transmission performance to rear axle hub..
  • 【Simple Installation】 The installation of 3 stud wheel hub is simple, and the spline wheel can be repaired well without any complicated tools..
  • 【After-sales Service】Our store provides you with 100% new and high-quality spline rear wheel axle hub. If you have any questions, please tell us in time, we will solve it in the first time..
Check Stock

Redcat Racing Everest GEN7 Sport 1/10 4WD RTR Scale Rock Crawler, Silver

  • Powder coated 3mm steel ladder frame, 4-link suspension, aluminum Capped oil filled shocks, functional 1.9 bead lock wheels, lockout spool axle carriers, aluminum wheel hexes, ball bearings throughout..
  • Adjustable wheel base (317mm - 325mm), multiple shock positions, adjustable approach and departure angle, tunable suspension..
  • Licensed interco Super swamper tires, scale body, shackle mount bumpers (LED ready).
  • 550 brushed motor, waterproof Crawler ESC with 3 selectable brake modes, hexfly metal gear steering servo, 2.4GHz radio system..
Check Stock

Redcat Racing Everest GEN7 Sport 1/10 4WD RTR Scale Rock Crawler

  • Powder coated 3mm steel ladder frame, 4-Link suspension, Aluminum capped oil filled shocks, Functional 1.9 beadlock wheels, Lockout spool axle carriers, Aluminum wheel hexes, Ball bearings throughout..
  • Adjustable wheel base (317mm - 325mm), Multiple shock positions, Adjustable approach and departure angle, Tunable suspension..
  • Licensed Interco Super Swamper Tires, Scale body, Shackle mount bumpers (LED ready).
  • 550 brushed motor, Waterproof crawler ESC with 3 selectable brake modes, Hexfly metal gear steering servo, 2.4GHz radio system..
  • Assembled & Ready to Run - Includes 7.2V 2000mAh NiMH Battery, & NiMH Charger - Requires 4-AA Batteries for Transmitter..
Check Stock