Reviews Pneumatic Tool Oil

Sta-Lube Air Tool Oil SL2533-1 Gallon, Anti-Corrosive Lubricant for Pneumatic Equipment & Tools

  • STA-LUBE: Sta-Lube offers a range of high performance industrial greases, gear oils, service oils, fluids, hand cleaners, additives, and lubrication formulas. Our products have been rigorously tested to meet the highest quality standards..
  • PNEUMATIC TOOL OIL: This oil is recommended for lubricating pneumatic equipment and tools like impact wrenches, air ratchets, sanders, grinders, air motors, hammers, and drills. .
  • INCREASES TOOLS LIFESPAN: Our anti-corrosive tool oil contains solvents that break down deposits, while the oil lubricates the tool. Preventing rust and corrosion results in an extended lifespan of the tools. .
  • ENHANCES PERFORMANCE: Specially formulated with rust inhibitors, our Sta-Lube Air Tool Oil maximizes your tool's performance. .
  • PRODUCT SPECIFICATIONS: Sta-Lube Air Tool Oil Lubricant is available in a 1 gallon or 3.785 L bottle, and is made in the USA..
Check Stock

Freeman PTTO Air Tool Oil, 8 oz.

  • Specifically made for the daily lubrication of air compressor tools.
  • Extends life of air tools and maximizes performance by reducing friction and cleaning interior parts.
  • Consists of anti-gumming, anti-foaming, rust Inhibitor additives to break down deposits.
  • Apply several drops directly to pneumatic tool air inlet or in-line lubricator.
  • Non-synthetic air tool oil will keep your pneumatic tools working longer with less maintenance.
Check Stock

Chicago Pneumatic Tool CP9882 Air Hydraulic Riveter - Rivet Gun with Variable Nose Pieces. Tools and Equipment

  • Durable Power Gun: hand tool is specifically designed for general maintenance activities. Air hydraulic riveter is designed for rivets in aluminum, copper, and other softer materials.
  • Caulking Gun: Rivet tool is an ideal tool for trailer panels, number plates and any type of panel maintenance. Handheld tool allows easy pulling up to 2200 lbs. Simple construction of the riveter ensures easy maintenance.
  • Easy-to-Use: pneumatic riveter features a transparent container with holes for quick release of rivet ends. Compact design of air-powered tool allows the operator to use it in tight spaces.
  • Portable Hydraulic Riveter: hand riveter is lightweight and is designed to perform optimally at various angles. Pneumatic riveter comes with different nose pieces for rivets 3/32, 1/8, 5/32 and 3/16 in..
  • Easy Maintenance: use an air-line lubricator with SAE #10 oil for smooth functioning and long lasting performance. You may also put a drop of machine oil to the chuck jaws every 5,000 cycles for frequent upkeep.
Check Stock

SWANLAKE 6.5 Liter Pneumatic/Manual Fluid Extractor Pump,Oil Changer Vacuum Fluid Extractor,Oil Change & Fluid Change Tool

  • Pneumatic mode and manual mode to fit all situation. The manual mode could be used by itself without any other equipments.The pneumatic mode turns the pump into a high-speed oil changer as long connect with air compressor..
  • 6.5L vacuum fluid extractor comes with 5 different diameter tubes go to the bottom of oil pan. also 3.2 feet flex hose and 3 extra dipstick hoses to reach the bottom of the reservoir and suck up all fluid..
  • Fast suction speed of 1.8L/min. The oil change pump extracts engine oil from a 4-cylinder car in a couple of minutes in pneumatic mode..
  • Use this oil extractor pump, the engine oil and transmission fluid could be extracted directly by the dipstick tube, the sealing cap is attached to stop the liquid from spill during transportation..
  • Its a perfect tool for working on vehicles anytime and anywhere.no need to lift up or crawl under the car to drain out the oil.NOTE:fluids with high volatility, high corrosion, high alkalinity and high temperature CANT be used..
Check Stock

EONLION 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Gear Gearbox

  • Function-10L capacity pneumatic air suction pump will help you quickly change (pump/distribute) the vehicle's ATF oil..
  • Why Need It- Pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy..
  • Advantage- Fluid extractor can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess..
  • Simple Operation-load more fluid at once. Pneumatic operation, easy to suck or pump oil. Equipped with pressure gauge (0-80 psi/0-6 bar), which can accurately read data..
  • Fitment- Suitable for a variety of models, such as compatible with Audi/Benz/BMW/Ford/Mini Cooper/Honda/Hyundai/Infiniti/Kia/Lexus/Nissan/Skoda/Toyota/Porsche/Volvo/Volkswagen DSG/Volkswagen CVT..
Check Stock

43300 Pneumatic Fan Clutch Wrench Set Removal Tool Kit Gear Assisted Positioning Tool for Ford GM Chrysler by Lucky Seven

  • 43300 Pneumatic Fan Clutch Wrench includes 7 driving wrenches that fit Ford, GM, Chrysler & Jeep. Set now includes 7/8", 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6. 0L and 6. 4L Power stroke diesel pickup. 1-7/8"and 2" are still included in the set. 1-1/2" 41mm and 42mm are still available individually..
  • 43300 Pneumatic Fan Clutch Wrench Set ，Package included:1 * 43370 handle+1 *43380 32mm driving wrench+1 *43390 36mm driving wrench+1 *43440 40mm driving wrench+1 *43530 47mm driving wrench+1 *43430 7/8" driving wrench+1 *43410 1-7/8" driving wrench+1 *43420 2" driving wrench.
  • 43300 Pneumatic Fan Clutch Wrench Kit,43300 pneumatic fan clutch,Fan clutch installer/remover set,Quickly removes and installs fan clutch when repairing the water pump or fan clutch.Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary..
  • 43300 Pneumatic Fan Clutch Wrench AKA Fan clutch removal tool kit,43300 pneumatic fan clutch wrench set,for 43300 lisle,43300 wrench set,43300 fan clutch tool,43300 pneumatic fan clutch,for lisle 43300 pneumatic fan clutch wrench set,....
Check Stock

BOSTITCH Pin Nailer, 23 Gauge, 2-Inch (BTFP2350K)

  • Drive 23 GA, 2-inch nails recessed into oak and other dense wood with this pneumatic nailer.
  • Tool-free jam release mechanism for easy nail removal.
  • Tool-free depth adjustment for easy depth control.
  • Oil-free operation reduces risk of oil stains on work surface.
  • Low nail lockout with bypass alerts for when to reload.
  • Uses 23 GA headless pin nails from 5/8-inch to 2-inch length.
  • Reversible belt hook for easy carrying on the jobsite.
Check Stock

JoyFans 10L Pneumatic Transmission Fluid Pump Extractor and Dispenser, Gearbox Oil Transfer System Refill Fill Evacuator Tool Kit with 15PCS ATF Adapters for Most Garage Shop Vehicles

  • ...l, power steering fluid, engine oil, gearbox oil, lubricating oil, brake fluid, coolant, etc. If it's used for ATF oil, 15 optional ATF adapters are well kept in a blow-molded case at your fingertips. All parts in this fluid evacuator and dispenser tool set are designed to transfer fluids fast and safely..
  • Handsfree Pneumatic Helper: This transmission fluid pump will keep you away from boring laborious manual work with air compressors. Two-way extractor & dispenser tool saves energy and time.
  • Don't even need to pour oil manually! You only need to switch the extract or dispense mode and buckle the self-locking device. Large capacity avoids the trouble of repeated refueling and satisfys refueling needs of multiple vehicles at once. Quick and sparkless..
  • 3PCS 1M Hoses: O.D. 6mm 8mm 10mm. Connect both ends of the 80'' hose with quick coupling to pump and the selected nylon hose first. They make the pump more suitable for various makes and models. The blue knob must be consistent with the air control switch valve: Extract or Dispense. The 1M nylon hose can be inserted into the car oil container or dipstick hole directly to extract waste oil for recycle and dispense the new oil for refilling. No need to jack up the vehicle and crawl under it.
Check Stock

Stanley Bostitch HP118K Pin Nailer Replacement 2 Pack Driver Unit # G0313700-2PK

  • Drive 23 GA, 2-inch nails recessed into oak and other dense wood with this pneumatic nailer.
  • Tool-free jam release mechanism for easy nail removal.
  • Tool-free depth adjustment for easy depth control.
  • Oil-free operation reduces risk of oil stains on work surface.
  • Low nail lockout with bypass alerts for when to reload.
  • Uses 23 GA headless pin nails from 5/8-inch to 2-inch length.
  • Reversible belt hook for easy carrying on the jobsite.
Check Stock

Campbell Hausfeld Oil Tool 8 Ounces (ST127012AV)

  • Ideal for the maintenance of all oil lubricated pneumatic tools.
  • Use daily by applying several drops in tool air inlet.
  • Specially formulated to maximize tool performance.
  • Finish your projects faster and easier with Campbell Hausfeld - The Air Power Expert.
Check Stock

CRAFTSMAN Finish Nailer, 18GA, Pneumatic (CMPBN18K)

  • MAINTENANCE FREE: The pneumatic nailer has oil-free motor for maintenance-free operation.
  • EASY JAM CLEARING: Tool-free jam release mechanism for easy jam clear.
  • PROPER NAIL ADJUSTMENT: Tool-free depth-of-drive adjustment for proper setting of nail heads.
Check Stock

YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank

  • ...in plug on the transmission pan. All the 15PCS metal adapters are marked with NO. and well packed in a case, compatible with Ford, BMW, Nissan, Honda, Audi, VW DSG, VW CVT, Skoda, Porsche, Benz, Mini Cooper, Kia, Toyota, Hyundai, Infiniti, VOLVO and Lexus. You can find appropriate models by applicable manual.
  • YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy. Pneumatic tool, works with vacuum pump to extract and with air pump to refill, ensuring high efficient and labor-saving.
  • Pump assembly incorporates the container cover, the handle trigger with lock, 2-way control valves for conversing evacuate and dispense, safety valve for automatically releasing excessed pressure (above 43psi /3bar), 1/4" American style air inlet plug, pressure gauge (0-80psi/0-6bar) for monitoring the pressure change, quick coupler for connecting main hose. 10L big capacity well constructed container, is marked with accurate scale to help observe the amount....
Check Stock

CRAFTSMAN Finish Nailer, 16GA, Oil Free Pump, Pneumatic (CMPFN16K)

  • MAINTENANCE FREE: Pneumatic nailer has the Oil-free motor for maintenance-free operation.
  • EASY JAM CLEARING: Tool-free jam release mechanism of the 16 gauge finish nailer is designed for easy jam clear.
  • PROPER NAIL ADJUSTMENT: Tool-free depth-of-drive adjustment for proper setting of nail heads.
Check Stock