Reviews Plumbing Supply

Watts Premier WP116187 Top Mount Twist Air-Gap Monitored Faucet, Brushed Nickel

  • TUBING SPECIFICATIONS: 1/4 inch Blue tube approximately 4 feet in length for connecting drinking water, 1/4 inch Red tube approximately 4 feet in length for connecting to the air gap of the faucet, and 3/8 inch Black tube approximately 3 feet in length for the connection to the drain.
  • PLUMBING CODE: This Faucet requires access to a drain connection. The Faucet conforms to all US Plumbing Codes. US Plumbing Code (5-202.13 Backflow Prevention, Air-Gap. An air gap between the water supply inlet and the flood level rim of the plumbing fixture, equipment, or nonfood equipment shall be at least twice the diameter of the water supply inlet and may not be less than 1 inch)..
  • See attached installation manual in the Technical Details section.
Check Stock

EZ-Fluid Plumbing 30" x 1/2" Fip x 3/8" Comp S.S Braided Flexible Water Hoses Connectors,Faucet Supply Line,Faucet Water Supply Hose Connector Lines For Bathroom,Kitchen,Outdoor Sink Faucets(1)

  • Stainless Steel Braided Supply Hose Line Faucet Connector Hoses.
  • EZ-Fluid Plumbing 30" x 1/2" Fip x 3/8" Comp S.S Braided Flexible Water Hoses Connectors,Faucet Supply Line,Faucet Water Supply Hose Connector Lines For Bathroom,Kitchen,Outdoor Sink Faucets.
  • EZ-FLUID Flexible Water Supply Hose Lines Connectors for Commerical or Residential Kitchen Sink,Bathroom,Indoor/outdoor Sink Faucets. And faucet water supply line extension available as well..
  • Stainless Steel Braided SS304 will deliver perfect corrosion protection for the supply line of the Kitchen,Bath Toilet,outdoor sink..
  • Plumbing Contactor Pack of 10 pcs 3/8" Compression x 1/2" Fip x 30" Long ，The 3/8" Female Compression hose attachment End will fits to 3/8" Male Comp. inlet on Angle Stop Water shut off Valve,or Any 3/8" Male Compression threaded Fittings.
Check Stock

HEDWETO Faucet and Sink Installer Plumbing Tools 18-in-1 Multifunctional Plumbers Wrench Sink Faucet Basin Wrenchs for Tight Spaces Under Sink Kitchen Bathroom Toilet Bowl

  • APPLICATIONS -- Not all devices are suitable. Please check the 18 functions of this sink wrench in the pictures 2-4. Note that this is a metric....
  • FRIENDLY & EFFORTLESS -- A versatile plumbing wrench for homeowners to fix plumbing system without calling a plumber. Easy to install, use and reach....
  • MULTIFUNCTIONAL -- 18-in-1 Faucet and Sink Installer Tool for plumbing task in bathroom toilet bowl kitchen / under the sink by yourself (even non....
  • SMART DESIGN -- The open slot allows for easy access to your supply lines. Foldable handle design makes it easy to grip and rotate, prevent the....
  • WORRY FREE -- You will get: 1× Plumbing Tool, 1× Plastic Insert Head, 1× Aluminum Alloy Insert Head, 1× Phillips Screwdriver Bit, 1 × Cutter.....
Check Stock

SharkBite U3088FLEX18LF Flexible Water Heater Connector, 3/4-Inch x 3/4-Inch x 18-Inch length

  • INSTALLS IN SECONDS: Water hose connectors require no special tools, no soldering, or glue. Just push to create a watertight seal.
  • COPPER, PEX, CPVC or PE-RT: SharkBite water heater plumbing fittings fit OD controlled copper, PEX, CPVC and PE-RT. Use for both hot and cold water supply lines.
  • QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • CERTIFIED: SharkBite fittings are certified to 200 PSI and 200°F and can be reused up to four times.
  • RESIDENTIAL and COMMERCIAL: SharkBite Water Heater Supply Connectors meet the same standards for commercial and residential plumbing applications. Inspector friendly for a peace of mind..
Check Stock

SharkBite U3088FLEX18BVLFA Flexible Water Heater Connector with Ball Valve, 3/4 inch x 3/4 inch FIP, Push-to-Connect Braided Stainless Steel, Water Heater Hose, SILVER

  • INSTALLS IN SECONDS: 18” Water heater flex hose line connections require no special tools, no soldering, or glue. Just push to create a watertight seal. Includes integrated ball valve supply shutoff.
  • COPPER, PEX, CPVC: SharkBite water heater line plumbing fittings fit Copper, PEX, CPVC and PE-RT. Use for both hot and cold water heater supply lines.
  • QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • CERTIFIED: SharkBite fittings are certified to 200 PSI and 200°F and can be reused up to four times in potable and hydronic heating water distribution.
  • RESIDENTIAL and COMMERCIAL: SharkBite water heater supply line connectors meet the same standards for commercial and residential plumbing applications. Inspector friendly for a peace of mind..
Check Stock

The Tub Connection Chariton, 61-inch Cast Iron Freestanding Bathtub Without Faucet Holes, Traditional Single-Slipper Soaking Tub With Clawfoot in Brushed Nickel, 45-Gallon Water Capacity

  • Bathtub Dimensions: 73"L x 30"W x 29.75"H. Extra interior width for maximum comfort..
  • Heavy duty, durable acylic constuction. Empty weight 161 LBS. Pure white inside and out. Chrome feet and plumbing.
  • Complete plumbing package includes solid brass: Modern Freestanding faucet with handheld sprayer, supply lines, and drain & overflow assembly. Chrome Finish.
  • Tub comes with 1 year manufacturer's defect warranty. Plumbing comes with 5 year manfacturer's defect warranty.
Check Stock

General Electric GXWH04F Standard Flow Whole House Filtration System

  • Heavy-duty filtration system: Filtered water for your whole home.
  • Filters water at the main supply: Install system in basement and/or out of sight.
  • Premium filtration: Certified to reduce sediment, scale, dirt and rust in your water, appliances and plumbing fixtures.
  • Easy installation: Includes 3/4″ plumbing connection, pressure relief valve, mounting bracket and remote filter reminder light for simple installation and filter change.
  • Three-month life: For best filtration results, filter (FXWTC, FXUSC, FXWPC or FXWSC) should be replaced every three months.
Check Stock

GE GXWH40L High Flow Whole Home Filtration System

  • Three-month life: For best filtration results, filter (FXHTC or FXHSC) should be replaced every three months.
  • Heavy-duty filtration system: Clear sump allows for easy viewing of filter.
  • Easy installation: Includes 1″ plumbing connection, pressure relief valve, bypass option, mounting bracket and remote filter reminder light for simple installation and filter change.
  • Filters water at the main supply: Install system in basement and/or out of sight. Compatible Pipe Connections-Horizontal only.
  • Premium filtration: Certified to reduce sediment, scale, dirt and rust in your water, appliances and plumbing fixtures.
Check Stock

Outdoor Shower Toorak 316 Marine Grade Stainless Steel Panel-No Rust! Perfect for Swimming Pools, Backyards, Beach Houses, Resorts. Hot & Cold Water Connections, Wall Mounted or Freestanding Options

  • ...ss Steel, which means this Shower WILL NOT RUST! So you can easily enjoy it either Outside or Inside your home..
  • CUPC & WATERMARK REGISTERED- Purchase with Confidence as this product has been Tested & Registered with the UPC Code of compliance, which is the Uniform Plumbing Code (UPC) and Canadian Uniform Plumbing Code (cUPC) which are designated as the American and Canadian national standards, respectively. These codes are designed to provide consumers with safe and sanitary plumbing systems and a piece of mind..
  • COMPLETE SHOWER SYSTEM WITH INTERNAL HOT & COLD PLUMBING! -This shower comes with Full Internal Pre-Installed Plumbing , no need for extra parts! All that needs to be done is to connect this unit to Hot & Cold water supply..
  • CAN BE INSTALLED FREE STANDING OR WALL MOUNTED-Enjoy this shower anywhere you like as it can be installed Free Standing, which means you can install it next to the swimming pool or anywhere in your backyard. And since it can be Wall Mounted as well, you can easily install it on your fence, on the wall or inside the bathroom..
Check Stock

RENO 316 Marine Grade Brushed Stainless Steel Massage Outdoor Shower Panel Swimming Pool Backyard Bathroom Hot & Cold Rainfall Hand Held Wall Mounted or Free Standing Outside Shower

  • ... Quality Stainless Steel, which means this Shower WILL NOT RUST! So you can easily enjoy it either Outside or Inside your home..
  • cUPC REGISTERED- Purchase with Confidence as this product has been Tested & Registered with the UPC Code of compliance, which is the Uniform Plumbing Code (UPC) and Canadian Uniform Plumbing Code (cUPC) which are designated as the American and Canadian national standards, respectively. These codes are designed to provide consumers with safe and sanitary plumbing systems and a piece of mind..
  • COMPLETE SHOWER SYSTEM WITH INTERNAL HOT & COLD PLUMBING! -This shower comes with Full Internal Pre-Installed Plumbing , no need for extra parts! All that needs to be done is to connect this unit to Hot & Cold water supply..
  • CAN BE INSTALLED FREE STANDING OR WALL MOUNTED-Enjoy this shower anywhere you like as it can be installed Free Standing, which means you can install it next to the swimming pool or anywhere in your backyard. And since it can be Wall Mounted as well, you can easily install it on your fence, on the wall or inside the bathroom..
Check Stock

Magnus Home Products 54\ Henderson Cast Iron Slipper Clawfoot Bathtub, No Drillings, Chrome, 385.0 lb

  • Cast iron tub dimensions: 67"L x 31.25"W x 29.5"H. Weighing in at 350 pounds.
  • Complete plumbing package includes solid brass: Gooseneck Deck mount faucet with handheld shower, supply lines, and drain & overflow assembly. Oil rubbed bronze finish.
  • 14" to overflow. 53 gallon capacity. Eagle's claw & ball feet..
  • Top quality porcelain interior. Pure white inside and out..
  • Tub comes with 1 year manufacturer's defect warranty. Plumbing comes with 5 year manfacturer's defect warranty.
Check Stock

EZ-Fluid Stainless Steel Braided Faucet Connector,Faucet Water Supply Hose Connector Lines 1/2" Fip x 3/8" Comp x 16" (Pack 25)

  • Stainless Steel Braided Supply Hose Line Faucet Connector.
  • EZ-FLUID Braided Stainless Steel Supply Line has cUPC, NSF Certified Lead Free.
  • EZ-FLUID Flexible Water Supply Hose Lines Connectors for Commerical or Residential Kitchen Sink,Bathroom,Indoor/outdoor Sink Faucets. And faucet water supply line extension available as well..
  • Stainless Steel Braided SS304 will deliver perfect corrosion protection for the supply line of the Kitchen,Bath Toilet,outdoor sink..
  • Plumbing Contactor Pack of 2 pcs 3/8" Compression x 1/2" Fip x 16" Long ，The 3/8" Female Compression hose attachment End will fits to 3/8" Male Comp. inlet on Angle Stop Water shut off Valve,or Any 3/8" Male Compression threaded Fittings,fauct bathroom lavy Toilet water connector.
Check Stock

Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool

  • ...ch effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
  • 【Easy & Fast Remove】1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Ma....
Check Stock