Reviews Plasma Cnc

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

  • Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
  • Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
  • 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
  • CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....
Check Stock

1.5\ 5/16-18 T-Bolt, 5 Pack

  • M6x20mm Hammer Head Bolt T Screw size: 15 x 10 x 6mm/0.59" x 0.39" x0.24"(LWT).
  • Metal Type：nickel plated , Carbon Steel.
  • 2020 Series European standard Aluminum Profile Accessories widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
  • T-shaped screws are used for aluminum profile design, suitable for standard 6mm T-slot 20 European standard aluminum profiles.
Check Stock

2021 PowerPlasma 102i 100 Amp plasma cutter with CNC Package

  • Comes With Blow Back iPTM-100 CNC machine plasma torch.
  • IGBT Infineon Modules / Inverter technology.
  • 100AMP Inverter Type cutter @ 60% duty cycle — 5 Year (Parts and Labor).
  • Up to 1 1/8″ clean cut with CNC (edge start).
  • Pierce up to 5/8″-3/4″ with auto THC.
Check Stock

uxcell Roll-in Spring M6 T Nut, Roll Ball Elastic Nuts for 4040 Series Aluminum Extrusion Profile, Pack of 12

  • Made from carbon steel,have high hardness, surface is Nickel-plated for good rust resistance..
  • Used for T-slot aluminum profile 40x40 series..
  • Easy to be roll into T slot of aluminum profile..
  • Package Content: 12 Pcs x 4040 Series M6 Roll Ball Elastic T-Nuts..
  • 4040 Series Aluminum Profile T-Nuts widely Use to build CNC routers, 3D printers, CNC laser cutters, CNC plasma cutters, robotics projects, 3D carvers, machine guards, workstations, etc.
Check Stock

AG60 SG55 WSD60 Air Plasma Cutter Torch Gun Completed Plasma Cutter Machine Non-Touch Pilot Arc Plasma Cutting Equipment WSD60 Torch Fit CUT50P CUT60P CT312P (3M 10ft)

  • AG60 SG-55 WSD60 Plasma Cutter Cutting Torch Gun Completed with pilot arc non-touch plasma cutter machine..
  • Rated welding current: 50-60A. The WSD60 plasma cutter is suitable for two-hole connection machines..
  • Fit for this Torch (gun) can be used for machines such as CUT50P CUT60P CT312P etc cnc machine.
Check Stock

Dreneco T-Slot Bolts Stainless Steel Hammer Head Bolt T Bolts for Woodworking, M8×50mm,3 pcs

  • Thread Diameter: 8mm (M8), Bolt length 35mm..
  • Material: high quality nickel plated carbon steel.Antirust and long life..
  • Material: high quality nickel plated carbon steel.Antirust and long life. High quality T head screws for aluminium extrusions, suitable for 40mm metric aluminum extrusions. Post-Assembly drop in hammer head screw, easier to install..
  • Widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
Check Stock

M5 25]-T Bolt Aluminum Connector-T Head Screw-T Bolt-for 2020 Series T-Slot Aluminum Profile (50PCS)

  • Thread Diameter: 8mm (M8), Bolt length 16mm..
  • Material: high quality nickel plated carbon steel.Antirust and long life..
  • High quality T head screws for aluminium extrusions, suitable for 30mm metric aluminum extrusions. Post-Assembly drop in hammer head screw, easier to install..
  • Widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
Check Stock

uxcell M5x12mm T-Slot Drop-in Stud Sliding Bolt Screw Carbon Steel for 20 Series Aluminum Profile 10pcs

  • Material: high quality nickel plated carbon steel.Antirust and long life..
  • Thread Diameter: 6mm (M6), Bolt length 12mm..
  • High quality T head screws for aluminium extrusions, suitable for 30mm metric aluminum extrusions. Post-Assembly drop in hammer head screw, easier to install..
  • Widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
Check Stock

uxcell M8x35mm T-Slot Drop-in Stud Sliding Bolt Screw Carbon Steel for 40 Series Aluminum Profile 10pcs

  • Material: high quality nickel plated carbon steel.Antirust and long life..
  • Thread Diameter: 5mm (M5), Bolt length 20mm..
  • High quality T head screws for aluminium extrusions, suitable for 20mm metric aluminum extrusions. Post-Assembly drop in hammer head screw, easier to install..
  • Widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
Check Stock

uxcell M6x25mm T-Slot Drop-in Stud Sliding Bolt Screw Carbon Steel for 30 Series Aluminum Profile 8pcs

  • Thread Diameter: 6mm (M6), Bolt length 25mm..
  • Material: high quality nickel plated carbon steel.Antirust and long life..
  • Material: high quality nickel plated carbon steel.Antirust and long life. High quality T head screws for aluminium extrusions, suitable for 30mm metric aluminum extrusions. Post-Assembly drop in hammer head screw, easier to install..
  • Widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
Check Stock

HONJIE 50Pcs M5x12mm Hammer Head Bolt T Screw Carbon Steel Nickel Plated for 2020 Series European Standard 6mm T-Slot Aluminum Profile

  • Material: high quality nickel plated carbon steel.Antirust and long life..
  • Thread Diameter: 8mm (M8), Bolt length 25mm..
  • High quality T head screws for aluminium extrusions, suitable for 40mm metric aluminum extrusions. Post-Assembly drop in hammer head screw, easier to install..
  • Widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
Check Stock

Yinpecly M8 x 20mm T Slot Bolts Fastener for European Standard 45 Series T-Slot Aluminum Profile Construction Industry, Carbon Steel Chrome Plated Silver Tone 20pcs

  • Material: high quality nickel plated carbon steel.Antirust and long life..
  • Thread Diameter: 6mm (M6), Bolt length 25mm..
  • High quality T head screws for aluminium extrusions, suitable for 30mm metric aluminum extrusions. Post-Assembly drop in hammer head screw, easier to install..
  • Widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
Check Stock

M12X80 T-Slot Bolt 20 pcs.

  • Total Size: 18 x 8 x 25.5mm/0.71'' x 0.31'' x 1.00"(WxTxH).
  • Material: T-Bolts are made from high quality carbon steel, surface is plated with chrome-plated for good rust resistance and better performance high hardness and a long service life.
  • Advantage: T-Shaped Bolts are great to have around for use in wet environments, durability and longevity.
  • Application: 4545 Series Aluminum Profile Accessories widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, machine guards, workstations, etc.
  • Easy to use: Measure and cut your bolt channel groove or use a pre-cut T-track that meets the size of your T bolt head.
  • Once the track has been established, you can easily slide the T bolt into place and use a knob or T nut to tighten and hold the bolt in place (track, knobs, and tee nuts not included).
Check Stock