Reviews Plain Bearing Pulleys For Sailboats

Hayden Automotive 5980 Idler and Belt Tensioner Pulley

  • These pulleys assist in belt routing and tensioning within the accessory drive system. Air conditioning compressors, alternators, power steering pumps, and water pumps are aided by the function of Idler Pulleys. All Idler Pulleys are of the highest quality and meet or exceed OE specifications..
  • Extends belt and accessory drive bearing life.
Check Stock

Newsfana Aluminum spacers Skates 8-Pack Spacers for 6mm Axles Spacers (Silver)

  • Inline Skate Bearing Spacers Material: Aluminum alloy, galvanized speed ring iron is specially molded into a dragon size.The gaskets are machined from high quality aluminum and meet specific standards. Aluminum Spacers This minimizes resistance to the bearings, and the sturdy aluminum construction eliminates the head and is more durable than other plastics! Skate bearing High quality, guaranteed service life!.
  • Aluminum Spacers This stepped gasket is suitable for conventional: Inline Aluminum Spacer aluminum shaft outer diameter: 7.9 mm inner diameter: 6.3 mm length: 23.5MM Size: 6.3MM X 7.9MM X 23.5MM. The bearing is located in the recessed part of the gasket and is provided with the wheel. Stepped Spacer Seamless integration. ( Package: 8 pack ).
  • Bearing Skate accessories Suitable for all standard size wheels, standard size 8mm bearings and standard size 6mm axles for standard size wheels and bearings. 6mm Axle Aluminum This minimizes resistance to bearings. The robust aluminum construction eliminates head and ratio Other plastics are more durable. Skate Wheel Bearing Installation: Place one bearing in the wheel. Install the gasket into the bearing in the wheel and insert the other bearing into the other side of the wheel..
Check Stock

Garage Door Extension Spring Pulley Sheave Kit +SAFETY CABLES & INSTRUCTIONS (1set）

  • Replacing the pulleys on your door will make the door run much smoother and prevent cable wear. Replace the door cable and install.
  • PLEASE-INSTALL SAFETY CABLES ON YOUR EXTENSION SPRING DOOR 6 RIVETS IN EACH HEAVY DUTY BALL BEARING PULLEY.
  • INCLUDED IN THIS KIT: 2 - 3" STUD PULLEYS 2 - 3" CLEVIS PULLEYS 4-3/8" BOLTS 4-3/8" NUTS 4-3/8" LOCK WASHERS 1 PAIR-1/8" DOOR CABLE 1 PAIR-1/8" SAFETY CABLE 2-CABLE LACING BRACKETS 2-S HOOKS 2-5/16" EYE BOLTS 4-5/16 NUTS.
  • INSTRUCTION SHEET REPLACING THE PULLEYS ON YOUR GARAGE DOOR MAKES THE WORLD OF DIFFERENCE YOUR DOOR WILL RUN MUCH SMOOTHER. THIS IS NORMAL MAINTENANCE THAT CAN EASILY.
Check Stock

Garage Door Extension Spring 27x48x220 for 8' High Doors 220LB Green (Qty 2)

  • Replacing the pulleys on your door will make the door run much smoother and prevent cable wear. Replace the door cable and install.
  • PLEASE-INSTALL SAFETY CABLES ON YOUR EXTENSION SPRING DOOR 6 RIVETS IN EACH HEAVY DUTY BALL BEARING PULLEY.
  • INCLUDED IN THIS KIT: 2 - 3" STUD PULLEYS 2 - 3" CLEVIS PULLEYS 4-3/8" BOLTS 4-3/8" NUTS 4-3/8" LOCK WASHERS 1 PAIR-1/8" DOOR CABLE 1 PAIR-1/8" SAFETY CABLE 2-CABLE LACING BRACKETS 2-S HOOKS 2-5/16" EYE BOLTS 4-5/16 NUTS.
  • INSTRUCTION SHEET REPLACING THE PULLEYS ON YOUR GARAGE DOOR MAKES THE WORLD OF DIFFERENCE YOUR DOOR WILL RUN MUCH SMOOTHER. THIS IS NORMAL MAINTENANCE THAT CAN EASILY.
Check Stock

Powerbuilt Power Steering and Alternator Pulley Remove and Install Tool Set, Replace Vehicle Steering Pump, Car Repair Tools, Storage Case - 648605

  • Made to be the most reliable tools in the market today.
  • Tool set for removal and installation of power steering pump and alternator pulleys.
  • For use on most power steering pump pulleys.
  • Includes special installer adapters, puller assembly with thrust bearing, jaw and sleeve.
  • Kit 20 includes 14-Piece for removal and installation of the power steering pump and alternator pulleys.
Check Stock

Nexen 818865, SSE-450 Spring-Engaged, Shaft Mounted Friction Brake

  • 【Precision Manufacturing】: The pure steel body creates a metallic texture, and every part of it embodies the quality of heavy processing..
  • 【Selected A3 steel】: It is made of high-quality solid A3 steel, so it not only has high strength and hardness but also has strong corrosion resistance. The selected material is only to give you better service..
  • 【Double Pulleys Design】: The double pulleys design realizes bi-directional adjustment, making opening and closing easy and smooth..
  • 【Excellent Load-bearing Capacity】: Equipped with an M12 bolt, and the double bearings make its load-bearing capacity stronger, these track roller wheels can carry about 400pounds..
  • 【Excellent Performance】: The metal material plus the widened caster design increases its performance stability and contact area with the ground, making it able to slide smoothly on hard surfaces. This will also not damage your door..
Check Stock

WINTOOLS 12 Pcs Pulley Puller Remover & Installer Kit Power Steering Pump Alternator Pulley

  • Removes pressed-on alternator and power steering pulleys on late-model GM and Chrysler engines..
  • The threaded end installs late model GM alternator and power steering pulleys, including Quad 4.
  • This puller fits some AMC vehicles. Will NOT work on 3.3L and 3.5L Chrysler engines.
  • Reverse the jaws to pull the alternator internal bearing..
  • Case Dimensions: (L)9″ x(W)7.25″ x(H)2″. Weight 2 lbs..
Check Stock

RUSON 50 Feet 5/16 Inch Wire Center Flag Pole Rope and Clips Kit White Braided Polyester Halyard Steel Center Flag Rope with 2 Pcs 3.5 Flag Swivel Snap Hooks

  • A Backup For Broken Rope: Great choice when flag pole rope replacement, steel wire at center provides a backup even if the outside braided rope broke.
  • Flag Pole Rope Kit: Includes 50 feets 5/16 inch wire center flag rope and 2 Pcs 3.5 inches swivel snap hooks, good for poles approx. 25 ft tall,....
  • Wire Center Flagpole Rope: Our rope for flag pole made of industrial braided polyester jacket for abrasion resistance, the rope is reinforced with a....
  • Durable Swivel Hooks: 2 Pcs 3.5 Inches flag clips for flagpole rope, Suitable for hang your flag on the flagpole, Rotated 360 degree for convenient to....
  • Wide Application: Great flag rope for flagpoles, Also can as rigging lines on pulleys, sailboats, winches and other functions, Great for government,....
Check Stock

ABN 6in 2-Jaw Gear Puller – Removal Tool for Gears, Pulley, and Flywheel

  • [Perform Maintenance with Ease]: Remove gears, pulleys, and flywheel parts with the ABN Jaw Gear Puller Set Pulley Removal Tool.
  • Wheel bearing puller 1-pack makes removal simple and damage-free for your vehicles.
  • [Built to Last]: No need to worry about this hub puller tool falling apart when you need it most.
  • Constructed of forged and hardened steel for strength and longevity, steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
  • [Optimal Reach]: Struggling to access tight, cramped spaces is a thing of the past.
  • Use the small jaw puller bearing automotive gear puller Removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application.
  • [Adjustable Performance]: Whether you are looking to remove parts from your engine base or your wheels, jaw puller too features universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
  • [Perfect Size]: 2-jaw transmission gear puller measures 6.25 inches (22.2cm) with jaw spread.
  • Universal pulley puller has 4.75-inch (12.1cm) jaw reach for your vehicle maintenance projects.
  • Use any 17mm hand wrench, ratchet, or combination spanner with this jaw gear puller set 1-pack.
Check Stock

GY6 (150cc) Woodruff Keys

  • Woodruff keys are ideal for securing wheels or pulleys to a spindle.
  • Woodruff keys eliminate the need to mill holes near shaft shoulders.
  • A second bar, that slides over the shaft, has a slot in it to accommodate the key.
  • Variants run 1/16" thru 5/16" in thickness.
  • Made of high-strength steel with a plain finish.
Check Stock

FIBERGLASS WAREHOUSE Fiberglass Cloth 6 Ounce x 50' Wide x 5 Yard Roll

  • General Purpose Fiberglass: The 6 oz fiberglass cloth is popular for a wide range of lightweight applications like laminating, reinforcing, sheathing and waterproofing. It is a flexible fabric and it wets out transparently..
  • This fiberglass cloth roll provides a uniform strength horizontally and vertically..
  • Generally called a sailboat cloth, it is a smooth, medium weight cloth, and is often used on surfboards, sailboats, cedar strip canoes, or other applications including pool, automotive or marine repairs..
  • Compatible with epoxy, polyester, and vinyl ester resin. This is a 5-yard roll (15 feet) by 50” wide for an area of 62.50 sq. ft..
  • Model No. 3733. Plain weave, 10 mils thick, silane finish. All fabric is rolled on to a 1" paper core..
Check Stock

Hypertune Universal Two Jaw Pilot Bearing Gear Puller Bearing Gear Remover Tool Carbon Steel Adjustable Pump Pulley Remover Hand Tool Removal Kit Straight Type 3 38x65mm

  • 【WIDELY FITTMENT】Universal for automotive flywheel, motorcycle wheel, bicycle wheel, pump bearing generator bearing, machine bearing, etc..
  • 【USAGE SCENARIO】Into Tight Areas bearing gear remover can remove gears, pulleys, and flywheels off a shaft in hard-to-reach spots without damaging your application..
  • 【USEFUL DESIGN】Adjust screw design, flexible and convenient to repair different size gears and bearings..
  • 【HIGH-QUALITY MATERIAL】Made of high-quality carbon steel, durable and not easy to rust..
  • 【CAUTION】There will be lubricating oil on the surface of the product, please wear gloves before use..
Check Stock

OMT Bearing Puller Set 5 Ton Capacity Bearing Separator Pinion Wheel Bearing Removal Kit with 2 and 3 Jaws Wheel Hub Axle Puller Set Heavy Duty Bearing Splitter Tool Kit with Case

  • VERSATILE BEARING PULLER: This Orion Motor Tech bearing puller set enables you to complete a wide range of pulling jobs, ideal for removing large or small bearings on front and rear wheel hub axle shafts, as well as gears, pulleys, and steering wheels.
  • ALL-IN-ONE TOOL KIT: Our bearing separator set includes a 3" bearing separator jaw, 2" bearing separator jaw, 6" yoke, 6-1/4" forcing screw, four 4" extension screws, four 5" extension screws, and two 4-1/2" L-type legs.
  • WIDE APPLICATION: The 2 bearing splitter jaws’ 5 ton capacity ensures they stand up to punishing use.
  • suitable for professionals and home mechanics and compatible with most vehicles, ATVs, and light trucks.
  • EFFECTIVE OPERATION: The knife like taper feature allows the jaws to get behind bearings to securely grip any bearing.
  • the included tools enable you to reach and remove bearings in tight spaces effectively.
  • DURABLE CONSTRUCTION: Constructed from heat treated Cr-V steel with black oxide finish, this pinion bearing puller set ensures corrosion resistance and long-term durability under even punishing use.
Check Stock