Reviews Pipes Exhaust Tips

Exhaust Tips Stainless Steel, Car Exhaust Tail Muffler Tip Pipes Muffler Modification, Inlet 2.5″ Outlet 3.2″ Polished Finished Tail Pipe, Auto Replacement for Most Cars Sedans Trucks (Black/Straight)

  • 【Protect Exhaust Pipes】: This tail pipe protects your original exhaust pipe, prevents it from deformation, and protect it from rain, dust and sand. It also cancels noise. With this exhaust pipe protector, you will have a better driving experience. There is a small hole at the bottom of the tip that can be used to drain water, with this hole there will be no standing water..
  • 【Car Decoration】: This exhaust tips is available in two colors, matte black and gold, this exhaust pipe is beautiful and generous, can decorate your car well and make it look more stylish. After installing this exhaust pipe, your car will look very sporty, the black one is understated and generous, the gold one is stylish and dynamic..
  • 【Dimensions】: The length of it is 5.7″, inlet size is 2.5 inch while outlet size is 3.2 inch. It is suitable for straight pipe models with an exhaust pipe diameter of less than 2.5″. Crimmed and angled cut design, black powder coated. There are two kinds of exhaust tips for you to choose, straight shaped and curved shape exhaust pipes can totally meet your demand..
  • 【Material】: This exhaust pipe is made of stainless steel with slanted tip shape. Due to its stainless steel material, it is durable and corrosion resistant. It protect yo....
Check Stock

PVC Pipe Cutter Exhaust Pipe Cutter Tailpipe Cutter, Universal Chain Pipe Cutter Exhaust Pipe Cut Off Tool Copper Pipe Cutter Carbon Steel Cutting Pliers w/Non-Slip Handle

  • 【Effectively Cut Tailpipes】 Work on tailpipes and exhaust pipes with diameters ranging up to 3.15"/83 mm. Get a clean cut with minimal rough edges or burrs on your exhaust pipe or tailpipe with our pipe cutters.
  • Cut tailpipe and exhausts on or off the vehicle with ease for making repairs or installing catalytic converters.
  • 【Cut Pipes Easily】 Cut pipe with our pipe cutter tool in four easy steps.
  • Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut. Tips: Lubricating the exhaust cutter cutting wheels before use will give a more smooth cutting operation and extends the life of the item.
  • 【Wide Application】The maximum cutting size is 0.09inches(2.5mm). This Pipe Cutter is suitable for cutting most low-carbon steel pipes, copper pipes and plastic (PVC, CPVC, PP, PEX, PE, rubber) pipes.
  • 【Comfortable Grip】14.5 inch (37cm) exhaust pipe cutting tool has rubberized handles.
  • Cushioned for comfort and non-slip security.
  • 【Withsatnd the Test of Time】This quality metal pipe cutter's cutting wheels were made of high quality 45# carbon steel, which won’t easily get dull. The head of the exhaust cutting tool won’t bend from duri....
Check Stock

Dsycar Universal 1.5-2.25 Inch Adjustable Inlet Exhaust Tips, Bolt-On Design Chrome Plated Stainless Steel Exhaust Tailpipe Tips (Silver Curved )

  • 【 Note 1 】Only fit 1.5’’-2.25’’ inlet pipes, please measure the outlet diameter of your pipe prior before purchase this exhaust tip. ( For all tailpipes, if the outlet size is 1.5 - 2.25 inch, then this exhaust tip can fit, no matter of your Year/Make/Model).
  • 【 Note 2 】Please check your original tailpipe's type. Straight tailpipe is for straight type, and curved tailpipe is for curved type. This one is suitable for curved exhaust pipes. (Pay attention: This exhaust tip is oval outlet, not round outlet).
  • 【 Note 3 】View product details with image,Understand the installation and size of the product, can view the other seven exhaust pipe products,Choose the right product size and your favorite color..
  • 【Easy to Install】 There is no need to replace any parts,No weld needed. No drill needed.Super Easy to Install! Three Bolt Fit the tip to your Pipe..
  • 【Car Decoration】Surface polishing process. More Car decoration can search Dsycar. Tips again, please measure your exhaust pipe diameter to make sure our products fit your vehicle..
Check Stock

Floshine 8PCS DIY Stainless Steel 3 Exhaust Pipe Kit,Including Mandrel Bend Pipe & U-Bend & Straight Pipe，Universal Fit 3.0 Inch Exhaust System…

  • DIY Exhaust System–Four types of pipes totaling 16 pipes to meet your exhaust system renovation plans.
  • High-quality–Rust-proof steel and computerized mandrel bends deliver high strength and greater durability, and factory custom manufacturing provides stability and longer service life..
  • Products in the kit– 2 pcs 90°Pipes, 2 pcs straight pipe exhaust kit, 2 pcs 135°Pipes， 2 pcs 180° U-Bends.
  • Easy to installation–Each pipe is extended in diameter at one end to facilitate sliding installation of different pipes.Installation can be done with clamps or by welding.
  • Fitment–Exhaust Pipe Bender Universal fit for modifying the exhaust pipe for the 3.0 inch exhaust system, 16 pipes can be interconnected and cut to create your own exhaust system.
Check Stock

Floshine 8PCS DIY Stainless Steel 2.25 Exhaust Pipe Kit,Including Mandrel Bend Pipe & U-Bend & Straight Pipe，Universal Fit 2.25 Inch Exhaust System

  • DIY Exhaust System--Four types of pipes totaling 16 pipes to meet your exhaust system renovation plans.
  • High-quality--Rust-proof steel and computerized mandrel bends deliver high strength and greater durability, and factory custom manufacturing provides stability and longer service life..
  • Products in the kit-- 2 pcs 90°Pipes, 2 pcs straight pipe exhaust kit, 2 pcs 135°Pipes， 2 pcs 180° U-Bends.
  • Easy to installation--Each pipe is extended in diameter at one end to facilitate sliding installation of different pipes.Installation can be done with clamps or by welding.
  • Fitment--Exhaust Pipe Bender Universal fit for modifying the exhaust pipe for the 2.5 inch exhaust system, 16 pipes can be interconnected and cut to create your own exhaust system.
Check Stock

IFOKA Exhaust Tip 2.5 Inch Inlet 2.5 Inlet 2.5 Outlet 9 Long Black Exhaust Tips Turn Down Diesel Stainless Steel Powder Coated Finish Tailpipe Extension Bolt On Design Pipe Down

  • Dimension: Black exhaust tips 2.5" inlet, 2.5 inches outlet, 9 inches overall length. Universally compatible with vehicles which have exhaust pipes....
  • Material: Stainless steel with black powder-coated surface treatment, prevent corrosion, high-temperature resistance, and not easy to scratch & fall....
  • Easy to install: Before the installation, cleaning the tailpipe and exhaust tips are necessary. The bolt on design make it easy to install, and not....
  • Unique Driving Experience: Angle cut and turn down design, more thicker inner waller design makes the vehicle sounds rumble and crackle, give you the....
  • Rustproof Design: Angle cut on the bottom of the exhaust tip, not easy to accumulate water and avoid rust effectively. In order to prolong the service....
Check Stock

AUTOSAVER88 1.75-2.25 Inch Adjustable Dual Exhaust Tip, 1.75'-2.25' Inlet 3' Outlet 8.66' Long Stainless Steel Double Layer Exhaust Tail Tip for 1.75'/2.0'/2.25' O.D. Tailpipe, Bolt On, Black Plating

  • Dimension: 1.75-2.25 inch adjustable inlet diameter.
  • universal fits 1.75″/2.0″/2.25″ outside diameter exhaust pipes whatever its Year/Make/Model is (Note: please measure dimension to make sure the outside diameter of your tailpipe is between 1.75-inch and 2.25-inch before purchasing).
  • Anti-deformation & rustproof: built from high-strength stainless steel, our exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
  • effectively anti-corrosive, avoid rust and deformation for enhanced durability.
  • Stylish & pleasant-sounding: the thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the light black plating finish gives your car a new & sporty appeal.
  • Easy installation: Bolt-on design, double layer wall, slant angle cut, rolled edge.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
Check Stock

Roush 422126 2017-2020 F250 F350 6.7L Diesel Exhaust System

  • For 2017-2020 F250 and F350 6.7L Diesels.
  • Includes 5" vented exhaust tips etched with ROUSH logo.
  • Made from durable, long lasting 304 stainless steel.
  • Mandrel-bent 4.0" pipes for excellent exhaust flow.
  • Single piece design for precise fitment and weight savings over stock.
  • Quick and simple installation with no cutting required.
Check Stock

Tnuocke 2.0" Butt Joint Band Exhaust Seal Clamp Sleeve,50mm Stainless Steel Exhaust Sleeve Band for Exhaust Pipe, Muffler,Manifolds,Coupler H-031-50

  • Premiun Materials:The exhaust clamp is made from high quality stainless steel, stainless steel material, not easy to rust, corrosion-resistant,Precision-machined, shiny surface with no burr.
  • Prefect design:Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion.
  • Easy install:Put one of the nutbars on one side and insert the bolts, put another nut bar on, then screw the nuts, and connect.
  • Wide use:They are fit perfectly for exhaust tips, mufflers, cat back systems, racing exhaust.
  • Package:You will get 1 stainless steel Exhaust Band Clamp,The exhaust band clamp is reusable without damaging the pipes.
Check Stock

Tailpipe Cutter 3/4 to 3 Inch, Carbon Steel Chain Exhaust Pipe Cutter Tool, Tube Cutting Pliers for Cutting Exhaust Pipe Copper Pipes

  • Easy Cutting: Use our exhaust tube chain cutter to quickly achieve cutting exhaust pipes, the cutting diameter of the product ranges from 3/4" to 3" (19-76mm), and can cut thin wall pipes up to 2.5mm thick.
  • Unique Design: The tail pipe cutter adopts an adjustable chain lock design, the chain length is 30cm. The riveting process makes our tube cutting pliers not easy to loosen and deform. Fine-tuning screws are designed at the rear of the product to ensure that the cutter is in close contact with the pipe.
  • High-Quality Material: The exhaust tail pipe cutter is made of high-hardness carbon steel material, which is durable, corrosion-resistant, and effectively prolongs the use time of the product. Comfortable coated handle on the surface, safe and non-slip, relieve your hand pressure.
  • Wide Range of Applications: Our tailpipe cutter are very suitable for cutting exhaust pipes, plastic pipes, low carbon steel pipes, copper pipes, etc. They can be used without electricity. They are very suitable for you to use outdoors and help you solve the difficult problem of cutting pipes outdoors.
  • Easy to Carry: The exhaust cut off tool is moderate in size, can enter a narrow space for work, and is easy to carry and store, greatly saving your storage space.
Check Stock

JWWY Stainless Steel Exhaust Muffler Tail Pipe Trim Cover for 2015-2022 Dodge Charger Exterior Accessories

  • Package: There are two pieces of 2.5 inches inlet exhaust tips in the package..
  • Specifications: The Apeixoto exhaust tailpipe tip has a standard 2.5’’ x 4’’x 9’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 2.5 inches diameter inlet exhaust pipes..
  • Material: The Apeixoto exhaust tailpipe tip is constructed with 304 stainless steel. It has a much more shinny and beautiful surface. There is a blue burnt end on the tip. It looks very fashionable and powerful. This types of stainless steel also is rust and corrosion resistant. It will keep your vehicle always in a good look..
  • Installation: Please be noted that these tailpipes are weld on designed. A professional installation would be recommended. Good installation will make the tailpipe function better..
  • Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists..
Check Stock

2" Exhaust Clamps Narrow Band Muffler Seal Clamp Exhaust Tip, Exhaust Resonator, Exhaust Manifold, Exhaust Flex Pipe, Project Catalytic Converter Repair Stainless Steel 2.0 inch 2PCS

  • 【Application】Seal exhaust clamp is the muffler repair part, narrow strap clamp can be used for Catalytic Converter, Exhaust Tips, Exhaust Manifold, Exhaust Resonator, Exhaust Flex Pipe, Exhaust Muffler Repair Projects..
  • 【Function】The narrow band clamp adds the mild steel semi-circular gasket parts, it can hold the pipe tightly without loosening. Distributes the cla amping force evenly over the entire 360° to prevent leaks and control material distortion. Unique seal and high clamp loads are provided, without distorting your exhaust components, allowing the flexibility to disassemble for service..
  • 【Easy to Install】Easy and less time consuming to install or remove with one bolt. This exhaust clamp is adjustable, has been tested for strength, and is reusable without damaging the pipes..
  • 【Service】100% satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

Versachem 90100 Exhaust/Tail Pipe Repair Kit

  • All-steel clamp with a high temperature gasket.
  • Seals and supports leaking exhaust and tail pipes.
  • Suggested Applications: Exhaust and tail pipes.
Check Stock