Reviews Car Exhaust Pipes Tips

Dsycar Universal 1.5-2.25 Inch Adjustable Inlet Exhaust Tips, Bolt-On Design Chrome Plated Stainless Steel Exhaust Tailpipe Tips (Silver Curved )

  • 【 Note 1 】Only fit 1.5’’-2.25’’ inlet pipes, please measure the outlet diameter of your pipe prior before purchase this exhaust tip. ( For all tailpipes, if the outlet size is 1.5 - 2.25 inch, then this exhaust tip can fit, no matter of your Year/Make/Model).
  • 【 Note 2 】Please check your original tailpipe's type. Straight tailpipe is for straight type, and curved tailpipe is for curved type. This one is suitable for curved exhaust pipes. (Pay attention: This exhaust tip is oval outlet, not round outlet).
  • 【 Note 3 】View product details with image,Understand the installation and size of the product, can view the other seven exhaust pipe products,Choose the right product size and your favorite color..
  • 【Easy to Install】 There is no need to replace any parts,No weld needed. No drill needed.Super Easy to Install! Three Bolt Fit the tip to your Pipe..
  • 【Car Decoration】Surface polishing process. More Car decoration can search Dsycar. Tips again, please measure your exhaust pipe diameter to make sure our products fit your vehicle..
Check Stock

AUTOSAVER88 1.75-2.25 Inch Adjustable Dual Exhaust Tip, 1.75'-2.25' Inlet 3' Outlet 8.66' Long Stainless Steel Double Layer Exhaust Tail Tip for 1.75'/2.0'/2.25' O.D. Tailpipe, Bolt On, Black Plating

  • Dimension: 1.75-2.25 inch adjustable inlet diameter.
  • universal fits 1.75″/2.0″/2.25″ outside diameter exhaust pipes whatever its Year/Make/Model is (Note: please measure dimension to make sure the outside diameter of your tailpipe is between 1.75-inch and 2.25-inch before purchasing).
  • Anti-deformation & rustproof: built from high-strength stainless steel, our exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
  • effectively anti-corrosive, avoid rust and deformation for enhanced durability.
  • Stylish & pleasant-sounding: the thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the light black plating finish gives your car a new & sporty appeal.
  • Easy installation: Bolt-on design, double layer wall, slant angle cut, rolled edge.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
Check Stock

AUTOSAVER88 1.5-2.5 Inch Exhaust Tip, 1.5"-2.5" Inlet 4" Outlet 9" Long Blue Burnt Stainless Exhaust Tip with Clamps and Adapters Fit for 1.5"/1.75"/2.0"/2.25"/2.5" Outer Diameter Tailpipe, Bolt-On

  • Dimension: Standard 1.5"-2.5" x 4" x 9" (inlet, outlet, and overall length).
  • Fits for cars with 1.5"/1.75"/2.0"/2.25"/2.5" outside diameter exhaust pipes, no matter what its model is (Please make sure the outside diameter of your car tailpipe is between 1.5-inch and 2.5-inch before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel with blue burnt finished, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • Stylish & pleasant-sounding: sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
  • Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M10 Wrench, no drilling or welding needed.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of ....
Check Stock

TCMT 21" Front Wheel Rim Dual Disc Flange Wheel Hub Front Fender Fit For Harley Touring Non ABS Models Road King Electra Street Road Glide Ultra Limited 2008-2023

  • Turn heads with the classic hot rod sound produced by these Vance & Hines 2-Into-2 Exhaust Pipes.
  • Crafted using 16-gauge steel, these 2-1/2" diameter pipes are downward-curved with scalloped end tips, featuring full-coverage heat shields for blue-proof chrome and removable baffles.
  • Big Radius 2-Into-2 Chrome Exhaust Pipes produce more torque and horsepower than stock pipes, giving you the look, sound and performance Harley riders expect from Vance & Hines.
  • Vance & Hines Big Radius Chrome 2-Into-2 Pipes are made in the USA.
  • Vance & Hines does not ship metal exhaust port gaskets with the Big Radius Chrome 2-Into-2 Pipes. Metal exhaust gaskets may be purchased separately 4400281.
Check Stock

SMOTIVEPRO Exhaust Pipe Cutter Tailpipe Cutter 3/4 inch to 3 inch (19-76mm) Chain Muffler Pipe Cutter for Quiet Cutting, 14blades, Suitable for On and Off Vehicle Use

  • To make safety and quick work on cutting exhaust pipe, SMOTIVEPRO Automotive Tool exhaust pipes and tailpipe cutter is simply the best solution for you. NOT FOR USE ON STAINLESS STEEL OR DOUBLE-WALL PIPES..
  • This item features a cutting wheel on each of the rollers for smooth tracking and a cushioned grip handle for comfort,besides muffler pipe cutter minimizes noise. With the unique design, you won't have to remove the exhaust from the car for cutting..
  • The Tailpipe Cutter is a very useful tool designed especially for both on and off the car cutting of tailpipes and exhaust pipes with diameters ranging from 3/4 inch to 3 inch (19-76 mm). Each roller has a cutting wheel that provides smooth tracking..
  • Whether you are a pro or "wannabe" weekend mechanic, this easy to use and functional car exhaust pipe cutter is a perfect add-on to your toolbox. Designed with quality and precision in mind, this top-notch product will come in handy to ensure that your exhaust system performs at its best, which is essential for your vehicle's overall dependability and well-being..
Check Stock

Ouzorp Size XL Universal Car Turbo Exhaust Whistle, Turbo Sound Whistle Exhaust Tailpipe Blow Off Valve Bov Aluminum Auto Accessories, Fashionable

  • Excellent Performance: This is a whistle of the turbo pressure, the aluminum whistle on the exhaust pipe, and the air through the exhaust pipe to make it sound.Make your car sound like furious, turn your car into king of the road, fashionable and unique, improving your driving interest..
  • High Quality Materials: Brand New and high quality.The Car Turbo Sound Whistle is made of aluminum alloy material, not easy to fade away,anti- ,wear resistance, light weight and durable..
  • Easy to Install: Loosen the screw on the Turbo Sound Whistle,Place the Turbo Sound Whistle body inside the exhaust muffler with the larger opening facing the inside of the muffler.Do not fit piping inlet which is more than 2.5inch.Tighten the bolt so as not to fall off while driving..
  • Warm tips - Please note? The turbo sound whistle is not suitable for extremely curved tail pipes.The big or small of the sound is also related to the thrust of the exhaust and the personal feeling..
  • When you receive the goods, if there are any problem, please contact us and do not directly open the dispute. We promise we will give you a satisfied solution after we confirmed it. We also will give you a positive evaluation..
Check Stock

4 inch Inlet Diesel Truck Tailtip, 8 inch Outlet Exhaust Tip, 15 inch Length Muffler Tip, Rolled End Angle Cut

  • Dimension: standard 4" x 8" x 15"(inlet, outlet and overall length).
  • ONLY universal fit for vehicles with 4-inch outside diameter exhaust pipes (Notice: Please make sure the Outside Diameter of your vehicle tailpipe outlet is 4.0" before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • plus, a drainage hole helps drain water to prevent rust.
  • Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the chrome-plated and polished finish would make your car tailpipe shine brightly.
  • Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M8 Allen Key, no drilling or welding needed.
  • Daily Maintenance: To make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

KUNTEC Tailpipe Cutter 3/4-Inch to 3-Inch Exhaust Pipe Cutter Tool with 15 Blades

  • This tailpipe cutter is designed for both on and off the car cutting of tailpipes and exhaust pipes with diameters of 3/4 to 3 inches (19-76mm).
  • The Exhaust pipe cutter features 15 blades, there is a cutting wheel on each roller for smooth tracking, only 1/4 inch rotation could finish the cutting.
  • Exhaust pipe cutter is made of high quality carbon steel, strong, sturdy, not easy to damage and extremely durable.
  • The rubber handle is good thickness and non-slip, easy to operate.
  • Cuts pipe up to 3mm thick. It is suitable for On- and Off-Vehicle Use, apply for cutting most types of pipework, such as copper pipes, aluminium pipes, carbon steel pipes etc.
Check Stock

Exhaust tip - to Fit 3 Inch Exhaust Tail Pipe Diameter- Stainless Steel to give Chrome Effect - Car Muffler Tips

  • Please measure your own pipe and bumper cutout, and compare to this product fitment size..
  • This exhaust tips fit pipes measuring 3 inches in diameter..
  • Slide on easily over your existing 3'' outer diameter tailpipe and that's it..
  • This muffler tips are made by high quality stainless steel won’t change the sound or function of your car..
Check Stock

ZOEYES 4 PCS Stainless Steel Exhaust Elbow, 2.5”Mandrel Bend Elbow - Thickness 16GA/.065”Wall, SS304 Stainless Elbow for Car Modified Exhaust Elbow Pipe, Stair Handrail, 90 Degree

  • Parameter - 2.5”Exhaust pipe 90 degree elbow.
  • Diameter: 2.5inch, Bend Degree: 90º, Wall Thickness: 16GA/.065”, Back arc length: 6inch (These elbow exhaust pipes can be welded to 2.5”OD tube).
  • Sturdy & Durable - Our 2.5”elbow exhaust pipe made of premium SS 304 stainless steel, smooth edge and mirror polishing.
  • Not easily damage, anti-rust, anti-oxidation 2.5 exhaust pipe.
  • Easy to Install - Laser cut end make the pipe ready to weld and easy to use, the elbow exhaust will save your time and energy.
  • Wide Application - These universal exhaust pipes are suitable replacement for your car modification, stair handrail welding, or complete own custom DIY exhaust system.
  • Package List - You will get valued 4 pieces of 90 bend elbow pipes.
  • No pollution: healthy, environmentally friendly, non-toxic and non-polluting.
Check Stock

PVC Pipe Cutter Exhaust Pipe Cutter Tailpipe Cutter, Universal Chain Pipe Cutter Exhaust Pipe Cut Off Tool Copper Pipe Cutter Carbon Steel Cutting Pliers w/Non-Slip Handle

  • 【Effectively Cut Tailpipes】 Work on tailpipes and exhaust pipes with diameters ranging up to 3.15"/83 mm. Get a clean cut with minimal rough edges or burrs on your exhaust pipe or tailpipe with our pipe cutters.
  • Cut tailpipe and exhausts on or off the vehicle with ease for making repairs or installing catalytic converters.
  • 【Cut Pipes Easily】 Cut pipe with our pipe cutter tool in four easy steps.
  • Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut. Tips: Lubricating the exhaust cutter cutting wheels before use will give a more smooth cutting operation and extends the life of the item.
  • 【Wide Application】The maximum cutting size is 0.09inches(2.5mm). This Pipe Cutter is suitable for cutting most low-carbon steel pipes, copper pipes and plastic (PVC, CPVC, PP, PEX, PE, rubber) pipes.
  • 【Comfortable Grip】14.5 inch (37cm) exhaust pipe cutting tool has rubberized handles.
  • Cushioned for comfort and non-slip security.
  • 【Withsatnd the Test of Time】This quality metal pipe cutter's cutting wheels were made of high quality 45# carbon steel, which won’t easily get dull. The head of the exhaust cutting tool won’t bend from duri....
Check Stock

Skull Exhaust Tip, Christmas Halloween Skull Head Bone Exhaust Tips Decoration, Solid Metal Exhaust Tail Pipe Adapter for Universal Fitment on Most Cars Motorcycle (Diameter 2 Inch,1Pack)

  • REALISTIC LOOK DESIGN: The highly detailed skulls are designed with a realistic appearance. The skull exhaust pipe is installed on your motorcycle which will make your riding look cool and amazing..
  • REAL USABILITY: The solid metal skull exhaust pipe can be used as an ornament as well as a real use. It can effectively protect your tailpipe from dust, rain and rocks, also prevent it from deformation and damage. And it will not restrict air flow..
  • EASY TO INSTALL: Our skull exhaust tips can be installed on the car or motorcycle directly without any adapter. There is no need to replace any parts, and no weld is needed. It's super easy to Install..
  • CREATIVE GIFT: The decorative skull exhaust pipe is a creative and surprise gift for family and friends on Halloween, Thanksgiving Day, birthday, etc..
  • SUITABLE SIZE: Our exhaust skull is suitable for cars and motorcycles in which the diameter of exhaust pipe is 2 inches.This product is 1 pack, it is recommended that you buy 2 exhaust pipes at a time..
Check Stock

Black Exhaust tip - Fit 1.5 to 2 Inch Exhaust Tail Pipe Diameter- Black Coated Stainless Steel - Car Muffler Tips

  • Please measure your own pipe and bumper cutout, and compare to this product fitment size..
  • This exhaust tips fit pipes measuring between 1.5 and 2 inches in diameter..
  • Size : / Length 5.5'' / width 2.5'' / Inlet Diameter 2 1/4'' / Outlet Diameter 2.5''.
  • This muffler tips are made by high quality stainless steel and won’t change the sound or function of your car..
  • Clamp-on installation : They are attached to the tailpipe by clamps and screws (Included)..
Check Stock