ABN 5-½in Large Jack Pad Universal Fit Cross Slotted Frame Rail Protector
- SAFELY LIFT YOUR VEHICLE WITHOUT DAMAGE: The ABN Large 5.5-Inch Pinch Weld Jack Pad Car Jack Puck 1-Pack is a floor jack pad that prevents the jack from exposing structural metal and is designed to protect the pinch welds, your vehicle under chassis, and overall frame so you can safely lift your vehicle at the proper jack points without scratching paint or causing metal-on-metal damage while using a hydraulic jack.
- BUILT FOR SAFETY: This floor jack rubber pad is constructed from stiff rubber that cushions your car from damage and increases safety when secured properly.
- Bottom side of slotted rubber jack pad includes textured grooves to ensure correct and safe fitment on jack without slippage.
- USE YOUR JACK: Top side of car jack pad has slotted crosshairs to align with and protect side pinch welds while the bottom of the jack lift pad is also keyed with 4 recesses that fit onto 4-inch cup rim lugs on your jack to prevent the pad from spinning on the floor jack cup (cup and pad contact starts between these lugs).
- LARGE SIZE: Fits beveled 5.5-inch steel lift cups bowl saddles on standard hydraulic floor jacks.
- Floor jack saddle pad has 5.5-inch (14cm) top diameter and 4-inch (10.2cm) bottom diameter, 1.75-inch height (4.4cm), 4 slots have approx. 0.4-inch ....
Check StockByenins Large Slotted Universal Magnetic Jack Pad Weld Frame Rail Adapter Orange for All Model Cars
- This jack pad is to fit the weld on most uni-body vehicles so that the vehicle can be jacked up safely without damage to the weld or Rocker Panel..
- There are 2 Neodymium rare earth magnets so that the supreme holding strength while placing jack and lifting vehicle..
- Fits most pinch weld that is at least 3 inches. The opening of each slotted jack pad is 0.385" wide by 3" in length. Slot depth is 0.63". Base....
- CNC machined from Billet Aluminum and anodized,a soft nylon insert to protect pinch weld.- Many colors available:Red,Orange,Blue.
Check StockDEDC Jack Rubber Pad Universal Jack Pad Adapter Slotted Frame Rail Protector Black Rail Adapter Support Block Jack Pad Medium Size 2 Pack
- ✔Durable Material: Maximum Load Bearing: 2 Ton.
- It's made of durable rubber material, and the medium size provides more more cushion and crush....
- ✔Suitable Size: 75mm Diameter 35mm Height, Slot Dimensions: 10mm Wide 15mm deep. It can protect most of the car chassis metal jack apex railings on....
- ✔Universal: Suitable for most jacks and vehicles, please verify dimensions and ensure fitment to your vehicle..
- ✔Helpful: Protects Pinch Weld Seams and Frame Rails from bending or breaking when jacking up your car with these jack pads. Soft rubber surface, do....
- ✔Package Includes: 2 * Jack Rubber Pad. If there is any dissatisfaction with the product, you can contact us, and we will provide you with a....
Check StockDEDC Jack Rubber Pad Universal Jack Pad Adapter Slotted Frame Rail Protector Black Rail Adapter Support Block Jack Pad Medium Size 4 Pack
- Durable Material: Maximum Load Bearing: 2 Ton.
- It's made of durable rubber material, and the medium size provides more more cushion and crush....
- Suitable Size: 75mm Diameter 35mm Height, Slot Dimensions: 10mm Wide 15mm deep. It can protect most of the car chassis metal jack apex railings on....
- Universal: Suitable for most jacks and vehicles, please verify dimensions and ensure fitment to your vehicle..
- Helpful: Protects Pinch Weld Seams and Frame Rails from bending or breaking when jacking up your car with these jack pads. Soft rubber surface, do not....
- Package Includes: 4 * Jack Rubber Pad. If there is any dissatisfaction with the product, you can contact us, and we will provide you with a....
Check Stock
Universal Floor Jack Rubber Pad Jack Adapter Pinch Weld Side Frame Rail Protector Puck/Pad
- High Quality: Made from highly durable rubber and cross slotted design which will provide more cushion and crush resistance. This rubber jack pad may smell a little bit stinks when it's new. Please do not mind it..
- Function: A ABIGAIL Jack Pad is designed to be sturdy enough to support your lift point while soft enough to preventing pinch Weld Seams and Frame Rails from bending or breaking when jacking up your car..
- Pad Dimensions: Diameter: 125mm. Thickness: 26mm. Jack pading/puck/caps: This product is used to protect the car undercarriage metal jack point railing that is on most vehicles..
- Maximum Load Bearing: 3 Ton, Fits most Jacks and vehicles, please verify dimensions and ensure fitment to your vehicle, please verify dimensions and ensure fitment to your vehicle..
- Service: 100% satisfaction guarantee, If you have any issues with the Jack Pad, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock
Jack Boss Jack Pad Universal Large Floor Jack Rubber Pads Adapter Pinch,Weld Side Frame Rail Protector Puck/Pad (1 Pack)
- 【Material&Function】Sturdy rubber jack pad is durable and non-deformable with long service life.Soft enough pad surface is to prevent frame rails and pinch welds from bending,and protect painted or coated chassis parts when using floor jack to lift the car.
- 【Unique Groove Design】Center down groove design of floor jack adapter provide more cushion and crush resistance.The wider and deeper groove contact area than other rubber pads ，making groove aligns nicely insert weld.Fits snug at the base and sits very sturdy on the jack.Have greater security.
- 【Size&Note】Jack pads diameter：4.17 inch.Thickness:1 inch.Groove width:0.7inch.Groove depth:0.23 inch.Maximum load bearing:3 Ton. 1*jack pad. Please measure floor jack's saddle size before purchase.
- 【Universal Floor Jack Rubber Pad】Protector Puck/Pad fit most standard hydraulic floor jacks and vehicles.Easy to install and change.
- 【Notes】If you have any question you can contact us，we will be the first time to solve for you.Our floor jack pads are tested for strict quality.
Check StockLIBRA Set of 4 30\ 5000lbs RV Trailer Stabilizer Leveling Scissor Jacks w/Dual Power Drill sockets & mounting Hardware Set
- ***NO MOUNTING HARDWARE, BAR OR CRANK INCLUDED***.
- Can be *bolted* or *welded* to frame - DO NOT use screws as the screws will work their way loose or be pulled out. Use BOLTS if you are not wanting to weld the jacks on..
- Retracted Length 11.5" Fully Extended Length 18" Base Plate 3 ⅜” W x 4" L. Mounting Area 1 ⅞” W x 4".
Check StockOPENROAD 24' RV Trailer Stabilizer Leveling Scissor Jacks for Travel Trailer Camper, with Handle - 5000lbs - Set of 2
- 【Capacity】This RV leveling jacks has a 5,000-pound capacity to help keep trailers level and stable.
- 【Finish】For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat finish.
- 【Telescopic height】Extended height: 24".
- 【Includes】2 leveling scissor jacks and 1 crank handle.
- 【Portable installation】This jack are compact and portable, allows either bolt-on or weld-on installation, easy operation.
Check StockClass A Customs | 4 Pack of Telescoping Trailer Swing Down Stabilizer Jacks (1000lb Capacity Each) 11.5-18\ | Includes 9\ Long Bar/Crank
- **Includes a 9" long, 0.5" round bar/crank**.
- Can be *bolted* or *welded* to frame - DO NOT use screws as the screws will work their way loose or be pulled out. Use BOLTS if you are not wanting to weld the jacks on..
- Retracted Length 11.5" Fully Extended Length 18" Base Plate 3.375” W x 4" L. Mounting Area 2” W x 4".
Check StockClass A Customs | 2 Pack of Telescoping Trailer Swing Down Stabilizer Jacks (1000lb Capacity Each) | ***NO MOUNTING Hardware, BAR OR Crank Included***
- ***NO MOUNTING HARDWARE, BAR OR CRANK INCLUDED***.
- Can be *bolted* or *welded* to frame - DO NOT use screws as the screws will work their way loose or be pulled out. Use BOLTS if you are not wanting to weld the jacks on..
- Retracted Length 11.5" Fully Extended Length 18" Base Plate 3 ⅜” W x 4" L. Mounting Area 1 ⅞” W x 4".
Check StockTMB Motorsports Single Polyurethane Universal Medium Size Slotted Jack Pad Frame Rail Protector
- Durable polyurethane construction, medium size for added cushion and cross hatched pattern for added grip.
- Designed to be sturdy enough to support your lift point while soft enough to preventing crushing the contact area.
- Prevent your OE jack point pinch welds from bending when using a Jack to lift your car.
- Fits most Jacks and vehicles, please verify dimensions below to ensure fitment.
- Pad Dimensions: 72mm Diameter 33mm Height, Slot Dimensions: 10mm Wide 13mm deep, does not fit Trolley Jacks.
Check StockReinforced Double Wheel Trailer Jack Caster with Pin (2000 Pound Rated)
- 2000 Pound Rated Double Caster Wheel with Under Carriage Weld Supports.
- Adjustable Side Bolt for Tightening Eliminates Rattle and Play.
- Swivel Caster Wheel Fits All Standard Jacks.
Check StockPoweka 13FT Butyl Rubber Sealant Tape for Car Auto Headlamps Window Door Windshield,4M Black Butyl Rope
- Butyl Sealant Main Application: Butyl rubber tape is suitable for the shock-absorbing paste of windshield, door waterproof film,decorative parts,car....
- Excellent Sealing：Our Butyl rubber sealant features excellent sealing adhesion,butyl tape can be sticky to any type of metal,....
- Easy To Use: Simply release the butyl sealant from paper and press it sufficiently around the pinch weld.And after removing headlamp cover, the weld....
- Black Butyl Tape: Rubber Sealant is a non-drying,non-hardening synthetic rubber based butyl rubber sealant. It will remain permanently sealing and....
- Butyl Windshield Sealant Size: Butyl sealant Diameter: 7-10 mm, Length: about 4 meters. It is long enough for re-sealing about 2 or 4 headlight....
Check Stock
