Reviews Pinch Point Forming Dies

TEMCo Industrial Universal Automotive Tube Flaring Tool Set Includes Push Connect Double Flare Fuel and Trans Cooler Dies TH1911

  • Dies and adapters to fabricate push connect fittings for 1/4, 5/16 and 3/8".
  • flare/double flare 3/16, 1/4, 5/16, 3/8 and 1/2".
  • Dies and adapters to fabricate GM fuel line flare, brake lines and transmission 5/16 and 3/8".
  • GM transmission cooling line 3/8" and 1/2".
  • Dies and adapters to fabricate metric bubble flare 4.75, 6, 8, and 10mm.
  • Dies have an enlarged compression area to grip the dies better.
  • Flaring tool set includes a Stabilizing Arm for easy tube forming.
Check Stock

TEMCo TH0006 Hydraulic Electrical Cable Lug/Terminal Crimper Kit with 18 Die Sets 12 AWG - 00 (2/0) (5 US TON)

  • New for 2020, TH0006 Version 2.0. Released September 1st 2020, all units now include the following improved features:.
  • TRUE-HEX Crimp Forming dies apply uniform pressure on all sides for even compression and high pull out resistance..
  • 9 Standard size dies for American Wire Gauge 12 through 2/0 (00). Dies conform to DIN industrial standards and are compatible with all US domestic market terminals, including color coded lugs. Dies imprint the size into the crimped terminal for code compliance inspections..
  • 9 additional plus size dies cover the hard-to-fit non standard lugs like heavy cast or thin-wall terminals. All 32 dies are black oxide coated, Won’t chip or flake like chrome plated versions..
  • Capable of crimping all battery and welding cable, building wiring, crimp terminal lugs (including heavy cast lugs) combined with a 5 Year Warranty from a well-known American name..
Check Stock

TEMCo Industrial Hydraulic Cable Lug Crimper TH0005 V2.0 (11 US TON) 10 AWG to 600 MCM Electrical Terminal Cable Wire Tool Kit with 32 Die Sets

  • New for 2020, TH0005 Version 2.0. Released September 1st 2020, all units now include the following improved features:.
  • TRUE-HEX Crimp Forming dies apply uniform pressure on all sides for even compression and high pull out resistance..
  • 16 Standard size dies for American Wire Gauge 10 through 600MCM. Dies conform to DIN industrial standards and are compatible with all US domestic market terminals, including color coded lugs. Dies imprint the size into the crimped terminal for code compliance inspections..
  • 16 additional plus size dies cover the hard-to-fit non standard lugs like heavy cast or thin-wall terminals. All 32 dies are black oxide coated, Won’t chip or flake like chrome plated versions..
  • Capable of crimping all battery and welding cable, building wiring, crimp terminal lugs (including heavy cast lugs) combined with a 5 Year Warranty from a well-known American name..
Check Stock

Shimpo Handheld Extruder

  • Handheld Extruder includes 5 Dies and 1 Blank die made of stainless steel..
  • The barrel unscrews and you fill it with clay, then use the extruder like a calking gun..
  • Hollow die set available Product number: H-EXTRD-HDS.
  • The 4 IN 1 Extruder die set comes with 9 dies and 1 block out die. H-EXTRD-4IN1.
  • Hand held extruders are great for forming anything from coils to small slabs and can be used in a variety of construction techniques.
Check Stock

MASTERCOOL 72480 Blue & Silver 37 Degree Flaring/Double Flaring Hydraulic Tool Kit

  • TUBE AND DIE SET STABILIZING ARM for easy tube forming.
  • MAGNETIC ADAPTER holder keeps adapters in place.
  • EQUIPPED WITH AN ENGLARGED DIE SET COMPRESSION AREA for better grip of dies.
  • THIS TOOL CAN BE USED ON "annealed steel" & "dead soft".
  • INCLUDES 3/16, 1/4, 5/16, 3/8 and 1/2" dies 3/16, 1/4, 5/16, 3/8 and 1/2" double flare adapters and 37˚ cone packaged in a blow molded case.
Check Stock

TEMCo TH0370 Dimple Die Set Tool Kit 8pcs: 1/2' 3/4' 1' 1-1/4' 1-1/2' 1-3/4' 2' 2-1/2'

  • Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13..
  • Eight Dimple Dies: 1/2", 3/4", 1", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/2". (Actual Hole Size).
  • This dimple die set creates flared holes most commonly used on automobile parts fabrication. Cut out holes inherently provide reduced weight of the work piece, and these dimple dies create rigidity by flaring the holes..
  • Die Material: Punch Grade Hardened Tool Steel, Black Oxide Finish..
  • This dimple die set works with a hydraulic driver and cylinder tool most commonly used with hydraulic knockout sets like our TEMCo THA043 and TH0372..
Check Stock

Tinsay Hydraulic Hose Crimper Crimping Tool Kit Conditioner Automotive Repair 71500 Hydraulic Hydra-Krimp A/C Air Conditioner Hose Fitting Crimper Machine

  • Lightweight hand-held hydraulic press is very portable and ideal for shop and field applications. Comes with a complete set of dies covering hose....
  • Dies snap quickly into the press fixture requiring no pins or screws..
  • Warning: do not move the piston without pressing a hose and joint. This may damage the tool and also be careful not to pinch any of the hands near the....
  • Perfect for crimping barbed and beaded fittings..
Check Stock

Interstate Pneumatics H8-KIT Heavy-Duty Bench Crimper (H8) with Ferrules (50pk) 0.625' ID x 1' & 0.656' ID x 1'

  • Made of ductile cast iron and heat-treated steel dies | Extra thick die carriage and a thicker hinge point for extra strength | Dies are compatible with dies available from other brands.
  • Comes with five dies for crimping | Die Sizes: 0.48", 0.52", 0.58", 0.62", 0.67".
  • 1/4" One Braid, 5/16" One Braid, 5/16" Two Braid, 3/8" One Braid & 3/8" Two Braid PVC & Rubber Hoses can be crimped with this crimper | Mounting Holes for permanent benchtop installation.
  • F7327: Length: 1.0 Inch | I.D: 0.625 Inch | Hole: 0.437 Inch | Wall Thickness: 0.025 Inch | Material: C46500 Brass | 50 per Pack.
  • F7328: Length: 1.0 Inch | I.D: 0.656 Inch | Hole: 0.437 Inch | Wall Thickness: 0.025 Inch | Material: C46500 Brass | 50 per Pack.
Check Stock

MASTERCOOL 72485-PRC Universal Hydraulic Flaring Tool Set Includes 3/8 and 1/2 Transmission Cooling Line Die and Adapter Sets with Tube Cutter Silver/Blue

  • TUBE AND DIE SET STABILIZING ARM for easy tube forming.
  • MAGNETIC ADAPTER HOLDER keeps adapters in place.
  • EQUIPPED WITH AN ENLARGED DIE SET COMPRESSION AREA for better grip of dies.
  • CAN BE USED ON "annealed steel" & "dead soft".
  • INCLUDES dies and adapters to fabricate push connect 1/4, 5/16 and 3/8".
  • GM fuel line flare, brake lines and transmission 5/16 and 3/8".
  • flare/double flare 3/16, 1/4, 5/16, 3/8 and 1/2".
  • metric bubble flare 4. 75, 6, 8, and 10mm.
  • GM transmission cooling line 3/8" and 1/2".
  • mini tube cutter for 1/8" to 5/8" (3 - 16 mm) O. D. tubing (1/8 to 1/2" nominal) all packaged in a custom blow molded case.
Check Stock

MASTERCOOL 72475-PRC Universal Hydraulic Flaring Tool Set with Tube Cutter Blue and Silver

  • Tube and die set stabilizing arm for easy tube forming.
  • Magnetic adapter holder keeps adapters in place.
  • Equipped with an enlarged die set compression area for better grip of dies.
  • This tool can be used on "annealed steel" & "dead soft".
Check Stock

MASTERCOOL 72450 Double Metric Bubble Flaring Tool Set Black/Silver/Blue

  • Set includes the Upgraded Hydra-Flare Yoke & Pump Assembly.
  • 45 & Double Flaring Adapters and Die Sets.
  • Hydra-Flare Yoke & Pump Assembly has been modified with a tube & die set stabilizing arm for easy form tube forming.
  • Magnetic Adapter holder to keep adapters in place.
  • Equipped with an Enlarged Die Set Compression Area for better grip of dies.
Check Stock

TEMCo TH0364 Dimple Die for 1-1/4” Actual Hole Size

  • Dimple Die for 1-1/4” Actual Hole Size.
  • Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13..
  • This dimple die set creates flared holes. Cut out holes inherently provide reduced weight of the work piece, and these dimple dies create rigidity by flaring the holes..
  • Die Material: Punch Grade Hardened Tool Steel, Black Oxide Finish..
  • Recommended Compression Tool: TEMCo Industrial TH0037 Knockout Punch Set or any other electricians knockout punch set..
Check Stock

Kaka industrial 1.2×710 28-Inch Throat English Wheel, English Wheel Sheet Metal Shaper Benchtop Machine Heavy Duty, Solid Construction, Easy Operation Sheet Metal Forming with 6 Pieces Forming Wheels

  • DEEP THROAT DEPTH. KAKAIND English Wheel has a 28 inches deep throat, which allows the projects to be finished perfectly..
  • GREAT CAPACITY. It can work up to 18 Gauge in mild steel and 14 Gauge in aluminum.
  • SOLID DESIGN. The harden chrome forming wheel surface guarantees the heavy use of many year’s service.
  • 6 PIECES FORMING WHEELS ARE INCLUDED. The lower Wheels Dies are: 2”, 3", 4", 6", 8" and 12" Radius..
  • VERSATILITY AND EASY OPERATION. It can be used in car, motorcycle, aviation and racing car construction or restoration where sheet metal panels need to have compound curves formed.
Check Stock