Reviews Pin Lock To Ball Lock Adapter

Corny Keg Disconnect Faucet Adapter - LUCKEG Brand Ball Lock Liquid Disconnect with Beer Keg Faucet Adapter 2 pcs for Home Brewing

  • 1.Include: 2 PCS Ball Lock Disconnect Liquid and 2 PCS Beer Keg Faucet Adapter.
  • 2.Connect: The Adapter usually Connect Beer Faucet, the Thread Part connect Ball Lock Disconnect MFL or Pin Lock Disconnect MFL.
  • 3.Portable: Very easy and portable connection without tangled liquid lines or Picnic Tap.
  • 4.Usage: Widely Used for Home Brewing, Wine Making, Parties, Barbecue and so on.
  • 5.Guarantee: Quality Guarantee, any problem for the Faucet Adapter Set, Money Back or Replacement free..
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • DISPENSE YOUR FAVORITE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
Check Stock

GGC4X4 Premium Anti-Rattle Hitch Lock Pin, Bike Racks, or Boat Trailers Silence The Rattling Noise That Occurs While Towing.Tightening Hitch Pin.Bolt Lock.Dodge Journey. Hitch Locking Pin

  • GGC4X4 hitch pin towing security product is fit and compatible to customer's general and specific towing needs in an easy manner..
  • GGC4X4 Anti rattle hitch pin lock provides an advanced security solution than a standard general hitch pin. This has 3 feature systems to protect a trailer hitch, ball mount and the trailer.
  • First is the strong lock and the nut latch assembly. This large square nut latch assembly fits onto 2 inch x 2 inch ball mount shank and attaches to shank walls firmly. This holds the ball mount and prevents noise whilst on drive..
  • Second is the 5/8 inch pin diameter fits onto hollow 2 inch x 2 inch shank holds from rattling and prevents swaying of load. This Nut latch assembly can hold firmly through 7/8 inch wrench.  This provides an additional support to the ball mount connecting a trailer to the trailer hitch. This hitch lock snaps onto the end and prevents from any theft of the ball mount..
  • GGC4X4 Anti rattle hitch pin lock works with a key with 3 functionalities - Hitch pin, anti rattle, and locking. This is designed to fit with 2’2 receiver tube and is compatible with hollow shanks only. GGC4X4 Anti rattle hitch pin lock is suitable for cargo carriers, bike racks, and other hitch-mounted carriers. It is s....
Check Stock

180 HITCH LTB4-2 Aluminum Adjustable 4\ Drop, Stainless Steel Ball for 2\ Receiver 12,500 GTW

  • STAINLESS STEEL TURNOVER BALL: 4" adjustable trailer hitch with stainless steel tow balls (2" tow ball and 2-5/16" tow ball), compatible with 2" receivers and trailers with 2" and 2-5/16" couplers.
  • 4" ADJUSTABLE BALL MOUNT: 4” drop hitch & 5" rise hitch, adjusts in 1" increments so you get the perfect fit for any trailer height - Secured using Anti-Theft Locking Design to protect your drop hitch.
  • HEAVY-DUTY TOWING CAPACITY: Made of 18 lbs of Aircraft Grade Aluminum & Stainless steel, with an industry leading towing capacity (GTW) of 18,500 lbs. Weigh Safe hitch is as tough as they come!.
  • COMES STANDARD WITH 1 PIECE LOCK: Included with the ball mount is a slider pin and lock to hold the slider in place- Check out the "KA" to include a Receiver Pin that's "Keyed-Alike" to the slider pin.
  • TRAILER HITCHES MADE IN USA: Heavy duty aluminum hitch w/ built-in tongue weight gauge for safe towing (Lifetime Gauge Warranty Included), 2 stainless steel tow balls, 2 pc lock set, & dust lock cover.
Check Stock

Weigh Safe WS4-2-KA 4

  • ADJUSTABLE BALL MOUNT: This 4 Inch drop hitch is a dream come true, allowing you to tow trailers of different heights with the same vehicle. The drop hitch adjusts in 1" increments so you get the perfect fit every time. All Weigh Safe ball mounts come standard with a high strength Dual Pin Lock that secures your trailer to your drawbar. All our locks come standard with a custom fitted dust cover to increase longevity. Fits 2 Receivers -SUV's, F-150, Chevy 1500, Ram 1500, Tundra, Titan, etc.
  • HEAVY-DUTY TOWING CAPACITY (GTW 12,500 LBS): Made of 15 lbs. of solid Aircraft Grade Billet Aluminum & Stainless steel this hitch is as tough as they come, with a towing capacity (GTW) of 12,500 lbs. on the 2 5/16" ball, 8,000 LBS on the 2" ball, and 1,500 lbs. max tongue weight. This premium ball mount was designed with everyday use in mind. This ball mount will not only provide you with Towing Peace of Mind, but the strength to get any job done with our Industry Leading Towing Capacity.
  • TWO CORROSION RESISTANT STAINLESS STEEL HITCH BALLS (2-5/16" & 2"): Have peace of mind knowing you can switch from a 2" ball to 2-5/16" balls in seconds. Both balls are made from High-Strength Stainless Steel which gives them industry leading strength and ....
Check Stock

Weigh Safe SWS6-2-KA Steel Adjustable 6\ Drop, Stainless Steel Balls for 2\ Receiver 12,500 GTW

  • ADJUSTABLE BALL MOUNT: This 6 Inch drop hitch is a dream come true, allowing you to tow trailers of different heights with the same vehicle. The drop hitch adjusts in 1" increments so you get the perfect fit every time. All Weigh Safe ball mounts come standard with a high strength Dual Pin Lock that secures your trailer to your drawbar. All our locks come standard with a custom fitted dust cover to increase longevity. Fits 2” Receivers -SUV's, F-150, Chevy 1500, Ram 1500, Tundra, Titan, etc.
  • HEAVY-DUTY TOWING CAPACITY (GTW 12,500 LBS): Made of 32 lbs. of solid Powder Coated Steel & Stainless steel this hitch is as tough as they come, with a towing capacity (GTW) of 12,500 lbs. on the 2 5/16" ball, 8,000 LBS on the 2" ball, and 1,500 lbs. max tongue weight. This premium ball mount was designed with everyday use in mind. This ball mount will not only provide you with Towing Peace of Mind, but the strength to get any job done with our Industry Leading Towing Capacity.
  • TWO CORROSION RESISTANT STAINLESS STEEL HITCH BALLS (2-5/16" & 2"): Have peace of mind knowing you can switch from a 2" ball to 2-5/16" balls in seconds. Both balls are made from High-Strength Stainless Steel which gives them industry leading strength and corrosio....
Check Stock

Weigh Safe SWS8-2-KA Steel Adjustable 8\ Drop, Stainless Steel Balls for 2\ Receiver 12,500 GTW

  • ADJUSTABLE BALL MOUNT: This 8 Inch drop hitch is a dream come true, allowing you to tow trailers of different heights with the same vehicle. The drop hitch adjusts in 1" increments so you get the perfect fit every time. All Weigh Safe ball mounts come standard with a high strength Dual Pin Lock that secures your trailer to your drawbar. All our locks come standard with a custom fitted dust cover to increase longevity. Fits 2” Receivers -SUV's, F-150, Chevy 1500, Ram 1500, Tundra, Titan, etc.
  • HEAVY-DUTY TOWING CAPACITY (GTW 12,500 LBS): Made of 36 lbs. of solid Powder Coated Steel & Stainless steel this hitch is as tough as they come, with a towing capacity (GTW) of 12,500 lbs. on the 2 5/16" ball, 8,000 LBS on the 2" ball, and 1,500 lbs. max tongue weight. This premium ball mount was designed with everyday use in mind. This ball mount will not only provide you with Towing Peace of Mind, but the strength to get any job done with our Industry Leading Towing Capacity.
  • TWO CORROSION RESISTANT STAINLESS STEEL HITCH BALLS (2-5/16" & 2"): Have peace of mind knowing you can switch from a 2" ball to 2-5/16" balls in seconds. Both balls are made from High-Strength Stainless Steel which gives them industry leading strength and corrosio....
Check Stock

Master Lock 1471DAT Trailer Coupler Latch Lock, 3-4/10″ Long Shackle x 9/32″ Diameter Pin

  • This Master Lock protects and guards against tow-away theft. The lock works when the trailer is either connected to the tow vehicle or when the trailer is unattached. The lock prevents the coupler latch from moving, therefore preventing either the coupler to be removed from the ball, or not allowing a ball to be placed into the coupler..
  • Fits UFP and surge brake couplers. K1 key blank.
  • Pin length or dimensional fit is 3-1/2″ wide with a 9/32″ diameter pin which is a standard size on virtually all couplers..
  • Chrome plated for improved wear and corrosion resistance. It has a precision 4 pin tumbler mechanism that resists picking.
  • Weather Tough seal and water tight cap protects the lock from the elements.
Check Stock

74 Gram 5/8 thread CO2 Bulb 2 pack

  • Portable size and Lightweight Construction allows you bring to any outdoor barbeque, party and also easy to store in your fridge.
  • Keg Regulator with 3/8" thread adapter, connect ball lock disconnect mfl or pin lock disconnect mfl.
  • Widely Use,the keg charger for charging and dispensing homebrew beer,kombucha, cold brew coffee, seltzer water, iced tea,and any other beverage.
  • 0-30 PSI gauge on regulator is accurate and accepts different sizes of CO2 cartridges, but please note it not be used with higher pressure argon or....
  • Quality Guarantee, any problem for the regulator, money back or replacement guarantee..
Check Stock

【2 Pairs】MRbrew Ball Lock Disconnect Set, Home Brew Ball Lock Keg Fittings with MFL Thread Swivel Nuts, Corny Keg Fittings with Stainless Steel 5/16'' Gas & 1/4'' Liquid Barbs & Extra 4 Hose Clamps

  • 1.Include: Ball Lock Disconnect Set and Beer Keg Coupler Adapter.
  • 2.Material: PBT Material for Ball Lock Disconnect Set and Stainless Steel for Keg Coupler Adapter and Swivel Nuts.
  • 3.Easy to Use, the Ball Lock Disconnect can Connect Sankey Keg Coupler Adapter Directly.
  • 4.Clear to Identify, the Gas Post has a Deep Subtle Etched Line, the Liquid Post has no Line, it will be convenient to switch between commercial kegs and hombrew co2 tanks with this Sankey to Ball Lock disconnect conversion kit.
  • 5.Quality Guarantee, Money Return or Free Replacement..
Check Stock

CZC AUTO Heavy Duty Trailer Hitch Receiver Lock Pin 2 Pack, 5/8 Inch Dia, 4 Inch Super Extra Long Black Pin for Class III IV Hitches, for Hitch Bike Rack Tray Ball Tow Rope for Trailer Truck Car Boat

  • CZC AUTO Trailer Hitch Lock Design: 5/8 Inch diameter 2 Pack keyed alike trailer hitch lock pin with Super Extra Long Effective Length 4 Inch. Specially for big towing vehicle, truck, 2-1/2 3 3-1/2 hitch receiver or Class III IV hitches. Please verify dimensions and length of the pin you want before purchasing our receiver hitch lock pin..
  • How To Operate Our Hitch Lock Pin: New lock-way, hitch locks adopt push-to-lock design without key, after hearing "click", you just need to pull the lock head to ensure it is working. When turn key to open the lock, pin will be pops-up automatically and comfortably..
  • Security Of Our Hitch Receiver Lock: 2 Pack keyed alike towing hitch lock is made of black electrophoretic painted solid steel. Our upgraded Zinc alloy tubular lock core adopts more advanced anti-theft technology to improve safety. And watertight dust cap can protect the keyhole from water and dirt..
  • Locking Hitch Pin's Application For : Class III IV Hitches, Hitch Bike Rack Tray Ball Tow Rope for Trailer Truck Car Boat.
  • CZC AUTO - A Reliable Brand In Hitch Security Industry. We offer 30-day money-back guarantee for any reason, 12-month warranty for quality-related issues. If you have any question after receiving or using our tow hitch lock, please contact....
Check Stock

【2 Pairs】MRbrew Homebrew Hose Swivel Nut Barb 1/4 Barb & 5/16 Barb Stainless Steel MFL Quick Disconnects Fittings for Brewing Keg System

  • 【MATERIAL】304 Stainless Steel, rust-free, can be used for long time.
  • 【1/4’’ BARB】Often used for liquid ball lock and pin lock disconnects.
  • 【5/16’’ BARB】Often used for gas ball lock and pin lock disconnects.
  • 【KEGGING NECESSARIES】Necessary for home or commercial brewing systems.
  • 【PACKGE】4 * Swivel nuts, 2 * 1/4’’ barbs, 2 * 5/16’’ barbs.
Check Stock

Kegco KMKCAL Keg Coupler Adapter, Liquid

  • This Kegco keg coupler adapter makes it easier than ever to dispense both store bought beer and your own home brew using the same dispense system.
  • Adapter fits onto the liquid-out side of all industry standard keg couplers and allows you to connect a liquid ball lock coupler to the post.
  • No more messing with tubing connections on a standard Sanke conversion kit or continuously tapping and untapping the Sanke keg.
  • Now you can seamlessly switch between your ball lock corny keg and a comercial Sanke keg in seconds!.
  • These Sankey to ball lock disconnects are the best solution for dispensing several beers that you have on tap at once.
Check Stock