Reviews Pin Lock Keg Tap

PERA 3/16 pin lock MFL beer line assembly & 5/16 pin lock gas line assembly for home brewing

  • Liquid Line Include: Pin Lock Liquid Disconnect MFL, Swivel Nuts, Beer Hose ID 1/4” OD 5/16” Length 3ft, 2 PCS Free Beer Hose Clamp, Picnic Tap,....
  • Gas Line Include: Pin Lock Gas Disconnect MFL, Swivel Nuts, Gas Hose ID 5/16” OD 9/16” Length 5ft, 2 PCS Free Beer Hose Clamp, Already Assembly.
  • Use: The Assembled Pin Lock Beer Line used for Cornelius Style Pin Lock Keg, Works for Beer or Soda.
  • Multi-Usage, carbonated seltzer water, home brew, different beverage, outdoor picnics, keg cleaning.
  • Guarantee: Quality Guarantee, any problem for Pin Lock Line, Money Back or Replacement free..
Check Stock

Kegco Keg Tap Coupler, 1

  • The Kegco KT85-MFL Lever Handle D System Keg Tap is the perfect coupler for anyone who wants to easily switch back and forth from domestic to home brew kegs.
  • This keg tap has a nickel-plated forged brass body and features a stainless steel probe and a black lever handle.
  • Coupler comes equipped with 1/4" MFL fittings for both the gas in and liquid out posts, so you no longer have to worry about pulling a hose off of a hose nipple or removing clamps if you want to use a different kind of coupler.
  • This D system keg coupler is easy to use - simply unscrew the nut from the fitting and screw it onto comparable ball lock or pin lock couplers.
  • Please Note: Beer Line requires a 1/4" Swivel Nut Set and Air Line requires a 3/8" Swivel Nut Set.
Check Stock

Kegco Keg Dispenser, Two Faucet, Black

  • ...atures that you've come to appreciate in other Kegco models, like an easy-to-clean removable built-in drip tray, a chrome guardrail that helps prevent glasses from sliding off of the countertop, and easy rolling casters that allow you to easily move the unit from room to room in your home or business! These casters lock to keep the unit from moving again once it's in position..
  • LARGE INTERIOR: The generously sized 5.8 cu.ft. interior can hold one full size keg (including Miller kegs, Coors kegs, and rubber kegs), one pony keg, one quarter slim keg, two 5 gallon commercial kegs, three ball lock kegs, or two pin lock kegs. When you're not using it to store and dispense kegs, you can use the three wire storage shelves to convert the keg refrigerator into a regular all-refrigerator. The unit measures 35.875" H x 24.375" W x 24" D..
Check Stock

Kegco Keg Dispenser, Two Faucet, Stainless Steel

  • ...atures that you've come to appreciate in other Kegco models, like an easy-to-clean removable built-in drip tray, a chrome guardrail that helps prevent glasses from sliding off of the countertop, and easy rolling casters that allow you to easily move the unit from room to room in your home or business! These casters lock to keep the unit from moving again once it's in position..
  • LARGE INTERIOR: The generously sized 5.8 cu.ft. interior can hold one full size keg (including Miller kegs, Coors kegs, and rubber kegs), one pony keg, one quarter slim keg, two 5 gallon commercial kegs, three ball lock kegs, or two pin lock kegs. When you're not using it to store and dispense kegs, you can use the three wire storage shelves to convert the keg refrigerator into a regular all-refrigerator. The unit measures 35.875" H x 24.375" W x 24" D..
Check Stock

Homebrew Pin Lock Disconnect Pin Lock Barb Quick Disconnect with Free Hose Clamp for Draft Beer Keg System

  • 1.Include: Pin Lock Gas Disconnect Barb type (3 pcs), Pin Lock Liquid Disconnect Barb type (3 pcs), Worm Clamps 6 pcs.
  • 2.Material: PBT Material for Pin Lock Quick Disconnect and Stainless Steel for Worm Clamps.
  • 3.Easy Connect: The Gray Base Pin Lock Keg Disconnect connect 3/16" Gas Line, and the Black Base Pin Lock Keg Disconnect connect 3/16" Beer Line.
  • 4.Use: The Pin Lock Barb Disconnects used for Cornelius Style Pin Lock Keg, Works for Beer or Soda.
  • 5.Guarantee: Quality Guarantee, any problem for Pin Lock Disconnect, Money Back or Replacement Free..
Check Stock

Keg Coupler, D Type Keg Coupler, Keg Taps For Kegerator, Sankey D Tap With Stainless Steel Probe, Keg Coupler D System With Black Handle & Hose Clamp (D Style)

  • ★ Stainless Steel Probe ★ The D system keg coupler’s probe is made of stainless steel that will not wear away over time and your beer will no flavor at all . Keg coupler’s body is made from chrome-plated brass.
  • ★ Tap For American Kegs Or Sankey Keg ★ The keg coupler is D – System keg taps. It fits perfectly into american kegs/sankey keg. Great sankey d coupler to replace old tap that was leaking and hard to get on.
  • ★ Come With Two Tailpiece Set & Hose Clamp ★ The sankey keg coupler is G5/8 thread( U.S. Beer Industry Standard). This d coupler has a 3/8″ OD gas/beer tailpiece to fit 5/16″ ID hose.
  • ★ Easy To Use And Lock ★You also need a gas tank/regulator/beer faucet/hose to get the gas from the regulator to the coupler and dispense your beer. And then tap the sankey coupler to keg, pull the handle out and then down to lock.
  • ★ With A Pressure Relief Valve ★ The pressure relief valve of keg tap coupler will automatically open on about 53 psi.
Check Stock

LUCKEG Homebrew Pin Lock Disconnect Pin Lock MFL Quick Disconnect with Swivel Nut and Free Hose Clamp for Draft Beer Keg System

  • 1.Include: Pin Lock Gas Disconnect MFL type with 5/16" swivel nuts (3 pcs), Pin Lock Liquid Disconnect MFL type with 3/16" swivel nuts (3 pcs), Worm....
  • 2.Material: PBT Material for Pin Lock Quick Disconnect and Stainless Steel for Swivel Nuts and Worm Clamps.
  • 3.Easy Connect: The Gray Base Pin Lock Keg Disconnect connect 5/16" Gas Line, and the Black Base Pin Lock Keg Disconnect connect 3/16" Beer Line.
  • 4.Use: The Pin Lock MFL Disconnects used for Cornelius Style Pin Lock Keg, Works for Beer or Soda.
  • 5.Guarantee: Quality Guarantee, any problem for Pin Lock Disconnect, Money Back or Replacement Free..
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • DISPENSE YOUR FAVORITE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
Check Stock

Kegco KMKCAL Keg Coupler Adapter, Liquid

  • This Kegco keg coupler adapter makes it easier than ever to dispense both store bought beer and your own home brew using the same dispense system.
  • Adapter fits onto the liquid-out side of all industry standard keg couplers and allows you to connect a liquid ball lock coupler to the post.
  • No more messing with tubing connections on a standard Sanke conversion kit or continuously tapping and untapping the Sanke keg.
  • Now you can seamlessly switch between your ball lock corny keg and a comercial Sanke keg in seconds!.
  • These Sankey to ball lock disconnects are the best solution for dispensing several beers that you have on tap at once.
Check Stock

Stainless Steel Stem Beer keg Tap Faucet with Ball Lock disconnect chromed body

  • Chrome Plated Brass Beer Keg Tap with Ball Lock Liquid Dispenser.
  • Easy to Use: Plug and Lock into the Ball Lock of Beer Keg's out post, no need Beer Line.
  • Different Occasion: Serving Beverages at Festivals, Picnics, Parties,Home.
  • Quality Guarantee,Any Problem, Money Back or Replacement Guarantee..
Check Stock

Kegco Kegerator, With Kegs, Black

  • ...S COMPLETE KEG TAPPING KIT: The HBK163B-2K comes complete with Kegco's Exclusive Home Brew Dispense Kit and everything you need to tap two Cornelius home brew kegs, including a dual faucet stainless draft tower, two chrome faucets, an empty 5 lb. CO2 tank, a double gauge CO2 regulator, and two complete sets of ball lock keg taps..
  • INCLUDES TWO 5 GALLON BALL LOCK KEGS: Made of durable and sanitary 304 grade stainless steel, these Cornelius kegs have a permanently molded rubber bottom skirt and handles for easy carrying. The ball lock fittings can be easily accessed for cleaning and maintenance, and the stainless steel lid fastens tightly to the body and includes a pressure release valve..
  • POWERFUL COOLING TECHNOLOGY: Intuitive push button controls and a clear LED display make it easy to precisely set the internal temperature between 32 and 75 degrees Fahrenheit, low enough to dispense kegged beer or high enough to ferment homebrew. Fan-forced cooling helps maintain the optimal refrigerated storage environment, and an air-cooled draft tower ensures that every drop of beer remains refreshingly chilled from the keg to your glass..
  • PLEASE NOTE: This is a homebrew kegerator and includes ball lock keg couplers for home brew kegs.
Check Stock

Kegco Kegerator, With Kegs, Black

  • ... COMPLETE KEG TAPPING KIT The HBK163B-3K comes complete with Kegco's Exclusive Home Brew Dispense Kit and everything you need to tap three Cornelius home brew kegs including a triple faucet stainless draft tower three chrome faucets an empty 5 lb CO2 tank a double gauge CO2 regulator and three complete sets of ball lock keg taps.
  • INCLUDES THREE 5 GALLON BALL LOCK KEGS Made of durable and sanitary 304 grade stainless steel these Cornelius Pepsi kegs have a permanently molded rubber bottom skirt and handles for easy carrying The ball lock fittings can be easily accessed for cleaning and maintenance and the stainless steel lid fastens tightly to the body and includes a pressure release valve.
  • POWERFUL COOLING TECHNOLOGY Intuitive push button controls and a clear LED display make it easy to precisely set the internal temperature between 32 and 75 degrees Fahrenheit low enough to dispense kegged beer or high enough to ferment homebrew Fan-forced cooling helps maintain the optimal refrigerated storage environment and an air-cooled draft tower ensures that every drop of beer remains refreshingly chilled from the keg to your glass.
  • PLEASE NOTE: This is a homebrew kegerator and includes ball lock keg couplers for home brew kegs.
Check Stock

Kegco Sankey to Ball Lock Coupler Adapter Set

  • Kegco Sankey coupler adapter kit includes both a gas and a liquid post.
  • These posts replace the barb fittings on your Sanke coupler to match the posts on a typical Cornelius ball lock style keg.
  • Allows you to seamlessly switch between your ball lock corny keg and a commercial Sanke keg in seconds.
  • No more messing with tubing connections or continuously tapping and untapping the same sanke keg when switching back and forth.
  • Now there’s a quick and easy solution that allows you to dispense any beer you have on tap!.
Check Stock