Reviews Pin Anchor Cap
OCPTY Trim Clip Pliers Applicable for Most Cars Repair Kit
- Professional Tools: Designed for removing pushpins using the center locking pin. Quickly and easily remove the plastic anchor with the center pin without damaging the pin or anchor. The conical end and spring-loaded design make it easier to use..
- Double Buffer Handle: These car clips are made of high-quality steel, which is rust-proof and scratch-resistant. The long handle of the drawing pin pliers has double buffer handles, which can reduce hand fatigue and improve productivity. It is economical and practical, with fine workmanship and bright surface..
- Special Design: The pliers are specially designed to allow access around the wheel well at a 30-degree angle. The pushpin can be removed by the center locking pin, allowing you to quickly and easily remove the plastic anchor from the center pin without damaging the pin or anchor..
- Universal Disassembly Tool: Small and light, easy to use and transport, can be placed in a suitcase or other storage space, suitable for vehicle maintenance and maintenance, is a high-quality maintenance and repair tool for all types of vehicles..
- Attention: As a professional car removal pliers repair tool, it is recommended to be operated by a professional car mechanic to avoid irreversible damage to the parts/car due to misope....
Check StockDrive Pins Zinc Alloy - 1/4 X 1-1/2 - Qty 1000
- Hammer Drive Pins (or just drive pins) attach fixtures to solid concrete or certain types of concrete blocks..
- Using a predrilled hole, they are installed with hand tools, typically with a hammer strike, to drive the pin into the anchor body expanding the anchor to form a tight fit..
- The washer on the anchor retains the pin and guides it during the driving installation..
- Anchor Diameter Equals Hole Diameter-Makes it easy to determine hole size.
- 304 Stainless steel is durable and rust resistant.
Check Stock2 Pcs 10mm Screw Pin Anchor Shackle 3/8 Inch 304 Stainless Steel Shackle for Rigging, Chains Wirerope Lifting.
- 1/2 Inch Anchor Shackle: Made of 304 stainless steel, one-way screw, bolt design, higher hardness, moisture-resistant, acid and alkali resistant, anti-rust, Connect loose ends of cables, chains, tow straps and snatch blocks..
- Anchor Shackle Size: 2 Pcs 3/8"(10mm) Bow Shape Screw Pin Anchor Shackle, one-way screw, bolt design, Max Open Width: 22mm, Working Load Limit: 2000lbs, Breaking Load: 8000lbs..
- Easy to Use: Make sure that the pin is properly screwed into the bow shackle hole, tighten it by hand, it with a wrench or other suitable tool, The best use of connection accessories, is perfect for use with ropes..
- Wide Application: Screw pin anchor shackles, used for sailing hardware, towing, hiking and other outdoor sports, Great for boats, jeeps and other applications for tie downs, towing, could be also used in loading and unloading of goods..
- Hardware Parts: These shackles hooks for anchoring, binding, rigging all types of hardware, always used together with a expansion hook and stainless steel chain, apply to a variety of boat or household applications..
Check Stock1 Pcs 12mm Screw Pin Anchor Shackle 1/2 Inch 304 Stainless Steel Shackle for Rigging, Chains Wirerope Lifting.
- 1/2 Inch Anchor Shackle: Made of 304 stainless steel, one-way screw, bolt design, higher hardness, moisture-resistant, acid and alkali resistant, anti-rust, Connect loose ends of cables, chains, tow straps and snatch blocks..
- Anchor Shackle Size: 1 Pcs 1/2"(12mm) Bow Shape Screw Pin Anchor Shackle, one-way screw, bolt design, Max Open Width: 1" (25mm), Working Load Limit: 1400kg / 3086lbs, Breaking Load: 5500kg / 12125lbs..
- Easy to Use: Make sure that the pin is properly screwed into the bow shackle hole, tighten it by hand, it with a wrench or other suitable tool, The best use of connection accessories, is perfect for use with ropes..
- Wide Application: Screw pin anchor shackles, used for sailing hardware, towing, hiking and other outdoor sports, Great for boats, jeeps and other applications for tie downs, towing, could be also used in loading and unloading of goods..
- Hardware Parts: These shackles hooks for anchoring, binding, rigging all types of hardware, always used together with a expansion hook and stainless steel chain, apply to a variety of boat or household applications..
Check StockSuperStick Shallow Water Anchor Pin Kit 5/8 x 7
- 5/8 inch x 7 ft shallow water anchor pin with stainless steel tip.
- Recommended for stand up paddleboards kayaks and boats up to 17 ft.
- Anchor pin with stainless steel tip is made of Aircraft Grade Fiberglass with an UV Inhibitor.
Check Stockuxcell M15 0.035T Capacity Single Swivel Rope Pulley Roller Block 2 Pcs
- Available with bronze self-lubricating bushings.
Check Stock8 Pcs 1/4 Inch 6mm Screw Pin Anchor Shackle 304 Stainless Steel D Ring Shackle for Connection Chain and Wire Rope
- Pin Shackle Size: 1/4 inch (6mm), Inner Eye Width: 12mm, Pack of 8 Pcs D Shape Screw Pin Anchor Shackle.Working Load Limit:325kg / 716lbs, Breaking Load: 1500kg / 3300lbs..
- Shackle Material: Made of 304 stainless steel, moisture-resistant, acid and alkali resistant, anti-rust, abrasion resistant, strong load-bearing, Work well in damp room and outdoor environment..
- D-Shape Shackle Use: Screw pin anchor shackles, used for coupling chain and wire rope for camping, hiking and other outdoor sports, With the secure lock ring, ensure that you will not lose your anchor..
- Screw Shackle Design: One-way Screw, Bolt design, More Robust, Easy And Convenient To Use, strong resistance, Shackles are widely used in various outdoor activities..
- Multifunctional Application: Multi-purpose use of connection accessories, apply to a variety of boat or household applications, could be also used in Marine Hardware, transportation, shipping industries and etc..
Check Stock13 Hours
- This version uses the same color scheme as the one in the movie..
- Get 2 Grape Soda Bottle Cap Pins!!!! A real life replica of the one from the movie "UP"..
- EACH PIN COMES WITH A ZIPPER GIFT BAG AND A STICKER ATTACHED SAYING "You and me, We're in a club now".
- We make them from BRAND NEW bottle caps that have never been used. The bottle cap has a diameter of one inch. The image is epoxy coated and sealed to provide water resistance and a glass like shine to the pin. The cap has two holes through which a safety pin attaches to the badge..
- You can then pin the badge to anything you can stick a safety pin through. Unlike other bottle cap pins out there, we attach the pin in a way that allows you to pin it to something without having to remove the safety pin.
Check StockCampbell 3002K 8\ Double Regular Wood Shell Block with K Screw Pin Anchor Shackle, 3800 lbs Load Capacity, 1\ Rope, 4-3/4\ Sheave
- Available with bronze self-lubricating bushings.
Check StockCampbell 3001K 8\ Single Regular Wood Shell Block with K Screw Pin Anchor Shackle, 2800 lbs Load Capacity, 1\ Rope, 4-3/4\ Sheave
- Available with bronze self-lubricating bushings.
Check StockCampbell 3002K 5\ Double Regular Wood Shell Block with K Screw Pin Anchor Shackle, 1800 lbs Load Capacity, 5/8\ Rope, 1-3/4\ Sheave
- Available with bronze self-lubricating bushings.
Check StockCampbell 3001K 4\ Single Regular Wood Shell Block with K Screw Pin Anchor Shackle, 1000 lbs Load Capacity, 1/2\ Rope, 2-1/4\ Sheave
- Available with bronze self-lubricating bushings.
Check StockCampbell 3002K 4\ Double Regular Wood Shell Block with K Screw Pin Anchor Shackle, 1400 lbs Load Capacity, 1/2\ Rope, 2-1/4\ Sheave
- Available with bronze self-lubricating bushings.
Check Stock