Reviews Piezoelectric Ignitor

(KAS) Viking Gas Range Oven Stove Cooktop Flat Ignitor Igniter PB040001

  • Gas Range Oven Replacement Viking Ignitor AR04001.Replaces part # PB040001..
  • Included with this ignitor is:1 Ignitor/2 Ceramic Wire Nuts/2 Wire Assemblies, with Female Insulated Terminals.
  • This is a Flat Bar Syle Ignitor./The White Ceramic part of the ignitor measures 2-1/4" Long..
  • The Ignitor part (the part that glows) measures 2" Long.The overall length from end of ceramic to end of the metal bracket is 4-1/2"..
  • The 2 wires measure 12-1/2" Long from terminal end to ceramic..
Check Stock

Backpacking Camping Stove 1.4L, AdaLov 2-in-1 Outdoor Camping Cooking System Portable Hiking Stoves Propane Camp with Pot & Pan for Trekking, Fishing, Hunting Trips and Emergency Use

  • Highly Efficiency---Our industry leading heat exchange technology minimizes wind impact and reduces boiling times by up to 30% compared to traditional backpacking stoves..
  • Light Weight&Easy Packing---All-in-one nesting design keeps parts organized for easy packing, including stove, bowl and fuel canister(NOT included). Weighs just over one pound, ideal for taking cooking with you wherever you go..
  • Easy to Use---The 1.4L pot and camping cooking system are one integrated unit, makes it super easy for a new user to use it. The built in piezoelectric ignitor ignites the stove instantly. The easier the product is to use, the more likely you will be to use it..
  • Safe&Durable---Silicone covered handles and neoprene sleeve provide heat protection while keeping food hot, ensure years of safe outdoor cooking pleasure!.
  • For any Adventure---AdaLov offers a backpacking stove that will keep you fueled from alpine expedition to a weekend trek. When exploring the back-country, a compact and efficient stove is fundamental, no matter the level of cuisine you want to create..
Check Stock

767A-380 44744-2 601 41-604 for Norton Igniter White Rodgers Furnace Ignitor XBM

  • 767A-378 Furnace Hot Surface Ignitor for Norton 601 601TB 20165702.
  • Hot Surface Furnace Ignitor stock # 767A-378..
  • This igniter replaces Robertshaw # 41-602 Norton # 601, 601TB & OE # 20165702..
  • This Ignitor has a 2-1/4" long from bracket to end of ignitor..
  • 5" Wire Leads with Plug, wire nuts included..
Check Stock

767A-378 White Rodgers Furnace Hot Surface Ignitor for Norton 601 601TB 20165702

  • 767A-378 Furnace Hot Surface Ignitor White Compatible with Norton 601 601TB 20165702.
  • Includes (1) Furnace Hot Surface Ignitor as pictured.
  • Part number # 767A-378. This igniter Compatible with Robertshaw # 41-602 Norton # 601, 601TB & OE # 20165702..
  • This Ignitor has a 2-1/4" long from bracket to end of ignitor. 5" Wire Leads with Plug, wire nuts included. 120V..
Check Stock

Round Gas Range Oven Ignitor for GE 41-208 ER4342528 SGR401 SGR400

  • Gas Igniter for Stove Range, Replacement Part No. SGR403.
  • SPECS:This igniter’s amperage range is 2.5 – 3.0. Used with 2.8 to 3.0 amp rated gas safety valves.The ignitor measures 3-1/2 long,one lead has a 1/4 female terminal the other is bare. 2 ceramic wire nuts included,This is a direct replacement for GE number WB2X9154, WB13K3, WB13K4,Fits many different range manufactured including Whirlpool, Kenmore, Roper..
  • Includes: high temperature stainless steel shield, high temperature MGT wire leads, and high temperature ceramic wire nuts to wire into original harness. Replaces long and short ignitors. Be careful not to drop your new ignitor.
  • ignitors are fragile and will break easily..
  • Description:The oven igniter, also called a glow bar, heats up the bimetal switch and causes the oven to ignite the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor..
  • Description:Use your wire cutters to cut the wires on the old ignito....
Check Stock

Gas Oven Bake & Broil Round Igniter for WB2X9154 4342528 Ignitor AP2014008, PS243425

  • Gas Igniter for Stove Range, Replacement Part No. SGR403.
  • SPECS:This igniter’s amperage range is 2.5 – 3.0. Used with 2.8 to 3.0 amp rated gas safety valves.The ignitor measures 3-1/2 long,one lead has a 1/4 female terminal the other is bare. 2 ceramic wire nuts included,This is a direct replacement for GE number WB2X9154, WB13K3, WB13K4,Fits many different range manufactured including Whirlpool, Kenmore, Roper..
  • Includes: high temperature stainless steel shield, high temperature MGT wire leads, and high temperature ceramic wire nuts to wire into original harness. Replaces long and short ignitors. Be careful not to drop your new ignitor.
  • ignitors are fragile and will break easily..
  • Description:The oven igniter, also called a glow bar, heats up the bimetal switch and causes the oven to ignite the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor..
  • Description:Use your wire cutters to cut the wires on the old ignito....
Check Stock

HiLetgo 5pcs Piezoelectric Sensor Analog Ceramic Vibration Sensor Module Piezoelectricity for Arduino DIY KIT

  • 1. Based on piezoelectric ceramic chip analog vibration makes use of the anti-transformation process of piezoelectric ceramic making the electric signals vibrate..
  • 2. When the piezoelectric ceramic shocking will generate an electrical signal, Controller analog port can be perceived slight vibration signals, Also can be realized with vibration interactions related works, such as electronic drums..
Check Stock

HID Headlight Xenon Ballast Ignitor - Replaces 33129-S0K-A01 33129-SCC-003 33129-SEA-003 W3T10571 - Compatible with Acura Honda & Mazda Vehicles - MDX TL TSX RDX Odyssey S2000 3 CX-9

  • Replacement HID OR Xenon Ballast Ignitor - is responsible for supplying power to your headlight's bulb. Overtime your HID Ballast Inverter can fail....
  • Compatible Replacement for Acura, Honda & Mazda Vehicles - 2013 - 2015 ILX | 2012 - 2013 MDX | 2007 - 2015 RDX | 2004 - 2005, 2012 - 2014 TL | 2004 -....
  • Replaces Part# 33129-S0K-A01, 33129-SCC-003, 33129-SEA-003, W3T10571 - Each of your vehicle’s headlights has its own ballast ignitor. These ballasts....
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part. This AA Ignition HID Xenon Ballast Ignitor is a direct replacement for the ballast....
  • Lifetime Warranty - This HID Xenon Ballast Ignitor comes complete with a lifetime warranty. If the ballast ignitor ever fails simply contact us for a....
Check Stock

PP200 PP200SC HA1000 Reddy Desa Ignitor Kerosene Heater by Ministry of Warehouse

  • ASKFD PP200SC Ignitor Heavy Duty Replacement for PP200 Ignitor HA1000 Ignitor 102548.
Check Stock

VI4 2 PAK Gas Oven Range Ignitor for PB040001 Viking

  • Gas Range Oven Replacement Viking Ignitor AR04001..
  • The White Ceramic part of the ignitor measures 2-1/4" Long..
  • if you have any questions about the product and its models. contact us and we will help you.
Check Stock

(NEW Part) Gas Range Oven Ignitor for Viking Range replacement for PB040001 AR04001

  • Set of Gas Range Oven Ignitor part number AR04001..
  • with the purchase of quantity 1 of this listing you will receive quantity 1 ignitors..
  • These are a replacement Viking Ignitor, part number PB040001..
  • This is a Flat Ceramic Bar with a Round Style Ignitor..
Check Stock

3-24V Electronic Buzzer, Piezo Tone Buzzer 85 to 95 Decibels Cable Length 100mm Widely Used on Computers, Printers, Photocopiers, Alarm, Electronic Toys

  • ✔【RATIONAL DESIGN】- Buzzer is an electronic sounder with integration structure. Using DC power, connected to rated power and the buzzer will sound continuously..
  • ✔【CORE COMPOSITION】- Piezoelectric buzzer is mainly made up by multivibrator, piezoelectric buzzer chip, impedance matching unit, resonator and shell..
  • ✔【PRODUCT PRINCIPLE】- Multivibrator is composed of transistors or integrated circuits. When switched on, multivibrator vibrates and outputs audio signal..
  • ✔【EASY TO CONTROLL 】- Impedance matcher drives piezoelectric buzzer sound. Can be controlled conveniently..
  • ✔【 APPLY TO】- The active buzzer is widely used on computers, printers, photocopiers, alarm, electronic toys, automotive electronic equipment, telephone, timer and other electronic products..
Check Stock

Vibration Switch Sensor Module, Piezoelectric Vibration Tapping Sensor Module Vibration Switch Module 5.0V DC AD/DO

  • An analog vibration sensor based on a piezoelectric ceramic sheet is an inverse transformation process that uses piezoelectric ceramics to generate vibration. When the piezoelectric ceramic piece vibrates, an electrical signal is generated..
  • Special sensor expansion boards are used in combination, and analog ports can be weakly perceived. Vibrating electrical signals enable interactive work related to vibration, such as electronic drum interactions..
  • ADO output: The analog voltage ceramic vibration sensor is connected to the controller analog terminal A0 according to the program. When the vibration degree is different, observing the output value of the serial port can realize the vibration-related in.
  • According to the greater the vibration intension, the higher the output voltage, the sensitivity of the vibration amplitude can be adjusted by the potentiometer..
  • This product has high sensitivity and can be adjusted to respond with a mouth blow or an output with a hand tap (Low turn sensitivity is low, right turn sensitivity is high)..
Check Stock