Reviews Open Brass Impeller

Red Lion RLSP-150 1-1/2-HP 50-GPM Cast Iron Sprinkler Pump

  • High efficiency thermoplastic impeller and diffuser.
  • Bi models are configured with brass impeller, rlsp series can be set for use with 115 volts or 230 volts.
  • 2 inch NPT suction and 1-1/2 inch NPT discharge, self-priming to 25'.
  • Maximum pressures to 47 psi, flow rates to 89 U.S. Gpm , repair kits available.
Check Stock

Ace Hydraulic Driven Centrifugal Pump 1.25" Suction x 1" Discharge USA Made Farmer Bob's Parts FMC-HYD-204

  • Suction 1-1/4" Discharge 1" 204 motor requires 4 GPM hydraulic flow on PC Closed and Open Center Systems Integral Needle Valve bypasses up to 9 GPM on Open Center Systems Standard with Viton Carbon/Ceramic Mechanical Seal Chemical Resistant Valox Impeller Cast Iron Pump Stainless Steel Shaft and Wear Ring Maximum Gallons Per Minute - 85 GPM Maximum PSI - 100 PSI Do Not Run Dry - Seal damage will result from running dry. Impeller damage may also occur if run dry for an extended period..
Check Stock

TryE 90W Automatic 110V Water Pressure Booster 250GPH Pump for Home Shower Washing Machine

  • Lower noise, provide a quiet working process.
  • The whole pump is sealed well and the conveyed water will be clean and sanitary.
  • Brass pump body, brass impeller and stainless steel shaft for durable using and corrosion-resistant.
  • Effectively help you solve the lit fire properly of shower owing to the lower pressure and unreliable pressure.
  • Perfect for boosting pressure for household water heater, circulating water for industrial equipments, supplying fresh oxygen for pond or fish tank.
Check Stock

21212799 Raw Sea Water Impeller Pump Crankshaft Mounted Sea Pump with Serpentine Belt Pulley for Volvo Penta 4.3L 5.0L 5.7L V8 V6 GI GXI GL, Replace for 21212799 & 3812519

  • 【Application】The Raw Water Sea Impeller Pump is suitable for the Crankshaft Mounted Sea Pump for Volvo Penta 4.3L 5.0L 5.7L V8 V6 GXI GL Boat Engines perfectly. Fits for the part number#21212799 and 3812519. Please make sure the number is correct before purchasing..
  • 【Superial Material】Manufactured from high quality hard steel , brass and rubber, keeping sturdy, durable, seawater resistance and long using life. Vibratory polished - brighter and more corrosion-free housing. The Raw Water Sea impeller Pump is manufactured by our professional machines & meet or exceed the OEM specification and function..
  • 【Easy Installation】Easy to install, just replace the old pump directly. Save money and effort. If you have doubts about the installation, professional installation is recommended..
  • 【Good Performance】Internal high-grade bearings and a durable one-piece design help improve the leak-proof performance of sealed pumps. The package includes 1 Raw Water Sea impeller Pump with serpentine belt pulley. The Inlet Port is 1 Inch & the outlet port is 1.25 Inch..
  • 【100% Satisfaction Guarantee】The johntruck Team aims to provide you the best products and services. Support 30 days returns and 12 months warranty. Please feel free to contact us if you have a....
Check Stock

Adult Rabbit Food - Free Choice Timothy Pellet (4.5)

  • 1 Impeller Neoprene + Brass 12 Blades OD 2-1/4" x 1-15/16" Wide Spline Drive.
Check Stock

Pet Rabbit Emergency Kit with Timothy Recovery Food (Bulk Recovery Food)

  • 1 Impeller Neoprene + Brass 12 Blades OD 2-1/4" x 1-15/16" Wide Spline Drive.
Check Stock

Replacement Remote Control for Sherwood RMRV6108, RD6108, RD6500, RM105

  • 1 Impeller Neoprene + Brass 12 Blades OD 2-1/4" x 1-15/16" Wide Spline Drive.
Check Stock

2771-20 M18 For Milwaukee Tool Water Transfer Pump (Bare Tool)

  • Features:Cordless Transfer Pump, Battery Platform M18, Maximum Flow Rate 8.
  • Voltage: 18V Length & Width x Height: 13.2" x 5.75" x 6" Head Height: Up to 75ft Outlet/Inlet Connections: 3/4" Lift up to 18' Weight: 7.9 lbs.
  • Faster Water Transfers, Faster Service Calls. The M18 Transfer Pump brings new to world cordless innovation to the industry with the fastest setup in the marketplace. With a self-priming pump, you can connect and go quicker than ever. The tool’s flexible impeller and powerful pump moves water at up to 480 gallons per hour, generates up to 18’ of lift and produces up to 75’ of head height..
  • Inlet connection: 3/4 in. brass Outlet connection: 3/4 in. brass Head height: up to 75 ft..
Check Stock

Pneumatic Mixer, 50 Gallon Stainless Steel Automatic Paint Mixer Machine Ink Coating Mix Tool (US Shipping)

  • ...spark and anti-explosive. It is the best choice for open liquid drums. The mixer is easily clamped to the side of the bucket and the chucking angle can be adjusted. A good mixing effect can be achieved, and the forward steering gear can be attached to the mixer..
  • ❥PROMISE- We can provide the stainless steel active impeller, please send us a message if you want a set of active impeller instead of the fixed impeller you see..
  • ❥APPLICATION - Environmentally friendly pneumatic mixer products are widely used in food, aerospace manufacturing, shipbuilding, home appliances, painting, food industry, medical and other related industries..
Check Stock

Jabsco 6050-0003 Marine Series Utility General Purpose Pump 110-Volt Nitrile Impeller Open Drip Proof Moto Non-CE 1 NPT Ports Bronze

  • 23 GPM (87 LPM) at 10’ (3m) of head, 1" NPT internal ports.
  • Bronze impeller body, JABSCO Nitrile Impeller for fresh and salt water as well as diesel, light oils, and antifreeze transfer.
  • Recommended for liquid temperatures between 50° to 180°F (10° to 83°C), Replaceable wearplate.
  • Lip type shaft seal, 3/4 HP open drip proof (ODP) motor, overload protected, 1725 RPM, 60 Hz, single phase.
  • 115/230 VAC, with 8 foot cord and plug (wired for 115VAC operation), 35-1/2 lbs. (approx.) (16.1 kg).
Check Stock

TFCFL 50 Gallon Pneumatic Mixer, 1/2 HP Stainless Steel Automatic Paint Mixer Machine Ink Coating Mix Tool

  • Unique cut design creates superior dispersing and greater breakdown of agglomerates.
  • we can also provide the stainless steel active impeller, please send us a message if you want a set of active impeller instead of the fixed impeller you see.
  • The load is safe, and can be automatically decelerated or stopped for the corresponding changes, and can be automatically recovered when the load is reduced. It can be overloaded, and it will not stop burning if it is overloaded for a long time. It has a self-cooling effect and can be used continuously for 24 hours in a 10-60 degree environment. Can start, stop, and turn right at any time.
  • Safe and explosion-proof, no sparks. It is the best choice for open liquid drums. The mixer is easily clamped to the side of the bucket and the chucking angle can be adjusted.
  • A good mixing effect can be achieved, and the forward steering gear can be attached to the mixer.Environmentally friendly pneumatic mixer products are widely used in food, aerospace manufacturing, shipbuilding, home appliances, painting, food industry, medical and other related industries. 0.100% explosion-proof, small size, light weight, simple operation, rich models, from laboratory samples Complete production specifications to the factory.
Check Stock

Johnson Evinrude 10 15 18 20 25 HP Brass Impeller Sierra 18-3002 375638 775518 Outboard Parts

  • Replace Johnson Evinrude 375638 775518 10HP 15HP 18HP 20HP 25HP 30HP 35HP Sierra 18-3002.
  • Ship from USA.Orders will be processed under 24 hours..
  • For impeller parameter, please refer to product description..
  • High Quality with brass hub insert. Have good seawater corrosion resistant property.
  • Full Power Plus Impellers engineered for over-performance,manufactured for extra-long service life.Cooperated with local workshops,quality is guaranteed..
Check Stock

Water Pump Impeller 369-65021-1 47-16154-3 18-3098 for Mercury Sierra Tohatsu 2HP 2.5HP 3.5HP 4HP 5HP 6HP

  • Water motor impeller have 6 blades.Height:14.30mm,External Impeller Overall Diameter:33.58mm,Internal Shaft Insert Diameter:10.25mm..
  • This aftermarket impeller replaces Mercury outboard motor part #47-16154-3,Tohatsu outboard motor part 369-65021-1, impeller 18-3098..
  • Water pump impeller are 100% brand new and don't used or rebuilt..
  • Similar in design to stock OEM units and require only simple hand tools for installation.Direct replacement,OE level quality and durability..
  • Water pump impeller 100% compatible with OE parts and passed TS16949 certified.Fits for Mercury/Mariner (4-STROKE) Carb 2HP 2.5HP 3HP,Mercury/Mariner (2-STROKE) 4HP 5HP,6HP..
Check Stock