Reviews Ohm Tweeter

Dynaudio Esotan System 372 6-1/2" 3-Way Component Speakers

  • Features: Three-way system, 6.5in MSP woofer, 1.1in soft-dome tweeter, 3in MSP midrange, Frequency response: 40Hz – 20kHz, and System impedance: 4-ohm..
  • MF172 Woofer: Nominal Impedance: 4-Ohm, Recommended Frequency Range: 40-4000Hz, Power Handling: 120W RMS | 1000W Transient. Total Diameter: 6.85", Mounting Diameter: 5.31", Mounting Depth: 2.63"..
  • MF171 Midrange: Nominal Impedance: 4-Ohm, Recommended Frequency Range: 160-14000Hz, Power Handling: 120W RMS | 1000W Transient. Total Diameter: 3.93", Mounting Diameter: 2.97", and Mounting Depth: 1.69"..
  • MT171 Tweeter: Nominal Impedance: 4-Ohm, Recommended Frequency Range: 1300-20000Hz, Power Handling: 120W RMS | 1000W Transient. Total Diameter: 2.48", Mounting Diameter: 2"-2.18", and Mounting Depth: 1.13"..
  • X372 Crossover: Crossover Frequency: 500Hz/3600Hz, Nominal Impedance: 4-Ohm, Power Handling: 200W (MF172), and Dimensions: 1.69" x 4.09" x 6.89"..
Check Stock

KICKER 4 46CSC674 CSC67 6.75 6-3/4 300W 4-Ohm Car Audio Coaxial Speakers

  • Pair KICKER 46CSC674 6.75" 6-3/4" 600w 4-Ohm Car Audio Coaxial Speakers CSC674. Fits nearly every car made. Zero-protrusion tweeters to fit nearly any factory depth. Woofer EVC (Extended Voice Coil) tech assists with precise linear excursion.
  • UV-treated poly-foam surround resists heat or direct sunlight. Large woofer magnet in a heavy-duty motor for ultra-clean bass. PEI-tweeter construction provides superb clarity. Neodymium tweeter magnets allow for increased volume in high frequencies.
  • Steel mesh grilles included for speaker protection. Dimension (L x W x H): 15 inch x 8 inch x 3.25 inch. Weight: 5 lbs. Speaker Design: 2 - way. Woofer Size: 6 3/4 in. (165 mm). Tweeter Size: 1/2 in. (13 mm). DC Resistance: 3.3 ohm. Peak Power: 300 Watts. Continuous Power (RMS): 100 Watts.
  • Sensitivity: 90 dB @ 1W1m. Effective Frequency Range: Hz 40-20k. Mounting Hole Diameter: 5 1/2 (140 mm). Top Mount Dept: 3/16 in. (4 mm). Bottom Mount Depth: 1-13/16 in. (47 mm). Grilles. Tweeter Magnet Material: Neodymium. Tweeter Dome Material: PEI (polyether imide). Tweeter Design: Balanced dome.
Check Stock

2) Kicker CSC674 6.75\ 600w Car Audio Speakers 2) CSC6934 6x9\ 900w Speakers

  • Pair KICKER 46CSC674 6.75" 6-3/4" 300w 4-Ohm Car Audio Coaxial Speakers . Speaker Design: 2 - way. Woofer Size: 6 3/4 in. (165 mm). Tweeter Size: 1/2 in. (13 mm). DC Resistance: 3.3 ohms. Peak Power: 300 Watts per speaker / 600 Watts per pair..
  • Effective Frequency Range: 40Hz - 20kHz. Mounting Hole Diameter: 5 1/2 in. (140 mm). Top Mount Depth: 3/16 in. (4 mm). Bottom Mount Depth: 1 13/16 in. (47 mm). Grilles: Yes. Tweeter Magnet Material: Neodymium..
  • Pair KICKER 46CSC6934 6"x9" 6x9 450 Watt 4-Ohm 3-Way Car Audio Speakers . Speaker Design: 3 - way. Woofer Size: 6x9 in. (160x230 mm). Mid Size: 2 in. (50 mm). Tweeter Size: 1/2 in. (13 mm). DC Resistance: 3.5 ohms..
  • Peak Power: 450 Watts per speaker / 900 Watts per pair. Continuous Power (RMS): 150 Watts per speaker / 300 Watts per pair. Sensitivity: 92 dB @ 1W, 1m. Effective Frequency Range: 30Hz - 20kHz. Mounting Hole Diameter: 5-5/8 x 8-7/16 in..
  • Top Mount Depth: 7/16 in. (12 mm). Bottom Mount Depth: 3 3/16 in. (81 mm). Tweeter Protrusion 1/16 in.(1 mm). Grilles: Yes. Tweeter Magnet Material: Electric Crystal Motor. Tweeter Dome Material: PEI (polyether imide)..
Check Stock

(4) KICKER 46CSC654 CSC65 6.5\ 6-1/2\ 300w 4-Ohm Car Audio Coaxial Speakers

  • Pair KICKER 46CSC654 CSC65 6.5" 6-1/2" 600 Watt 4-Ohm Car Audio Coaxial Speakers. Fits nearly every car made. Zero-protrusion tweeters to fit nearly any factory depth. Woofer EVC (Extended Voice Coil) tech assists with precise linear excursion.
  • UV-treated poly-foam surround resists heat or direct sunlight. Large woofer magnet in a heavy-duty motor for ultra-clean bass. PEI-tweeter construction provides superb clarity. Neodymium tweeter magnets allow for increased volume in high frequencies.
  • Steel mesh grilles included for speaker protection. Dimension (L x W x H): 14.5 inch x 7 inch x 3.25 inch. Weight: 5 lbs. Speaker Design: 2 - way. Woofer Size: 6 1/4 in. (160 mm). Tweeter Size: 1/2 in. (13 mm). DC Resistance: 3.3 ohm. Peak Power: 300 Watts. Continuous Power (RMS): 100 Watts.
  • Sensitivity: 90 dB @ 1W1m. Effective Frequency Range: Hz 40-20k. Mounting Hole Diameter: 4 1/3/16 (123 mm). Top Mount Dept: 3/8 in. (9 mm). Bottom Mount Depth: 1-11/16 in. (43 mm). Grilles. Tweeter Magnet Material: Neodymium. Tweeter Dome Material: PEI (polyether imide).
Check Stock

MCM Audio Select 55-1732 6 1/2 Professional Woofer

  • 300 watt RMS with 1000-watt peak power for the Pair.
  • Aluminum Voice Coil: 1" Ohm Impedance: 4 Ohm Max. Input Power: 1000W.
  • Sensitivity: 93dB/1w/1m Magnet: 10 Oz Frequency response: 45 - 20,000 Hz.
  • Injection Cone Woofer MidRange: 35mm (1.38in) Mylar Dome Tweeter: 1" balanced dome tweeter.
Check Stock

Pair KICKER 46CSC654 CSC65 Car Audio Speakers Bundle with 2) Rockville MAC65B Tower Speaker Enclosures, 2) 1.7Rubber Adapter Speaker Enclosures and Pair RWBC Neoprene Covers

  • ...Pod Enclosures. (1) Pair of RockvilIe 1.75" Rubber Adapter Inserts 4 Polaris RZR Tower Speaker Enclosures. (1) Pair of RockvilIe RWBC Neoprene Covers For 6.5" Marine Wakeboard Tower Speakers. Pair KICKER 46CSC654 CSC65 6.5" 6-1/2" 600 Watt 4-Ohm Car Audio Coaxial Speakers. Fits nearly every car made.
  • Zero-protrusion tweeters to fit nearly any factory depth. Woofer EVC (Extended Voice Coil) tech assists with precise linear excursion. Sun Light Treated poly-foam surround resists heat or direct sunlight. Large woofer magnet in a heavy-duty motor for ultra-clean bass. PEI-tweeter construction provides superb clarity. Neodymium tweeter magnets allow for increased volume in high frequencies. Steel mesh grilles included for speaker protection. Dimension (L x W x H): 14.5 inch x 7 inch x 3.25 inch.
  • Weight: 5 lbs. Speaker Design: 2 - way. Woofer Size: 6 1/4 in. (160 mm). Tweeter Size: 1/2 in. (13 mm). DC Resistance: 3.3 ohm. Peak Power: 300 Watts. Continuous Power (RMS): 100 Watts. Sensitivity: 90 dB @ 1W1m. Effective Frequency Range: Hz 40-20k. Mounting Hole Diameter: 4 1/3/16 (123 mm). Top Mount Dept: 3/8 in. (9 mm). Bottom Mount Depth: 1-11/16 in. (43 mm). Grilles. Tweeter Magnet Material: Neodymium. Tweeter Dome Material: PEI (polyether imide). Tweeter Desi....
Check Stock

Hertz Cento CX 690 6x9 Coaxials

  • Features: Power Handling: 300W Max | 100W RMS. Impedance: 4-Ohm, Frequency response: 40 ÷ 23kHz, Sensitivity: 93 dB, Woofer size: 6″ x 9″, Tweeter size: 1.58″, Supertweeter size: 0.8″, Woofer Voice Coil Ø: 1.2″, Tweeter voice coil Ø: 1.1″, Woofer magnet: High density flux ferrite, Tweeter magnet: Neodymium, Woofer cone: Semi Pressed Paper-Mica, Tweeter dome: PEI, and Supertweeter dome: PEI..
Check Stock

2 Audiobank 6x9 700 Watt 3-Way Red Car Audio Stereo Coaxial Speakers - AB6970

  • 200 watt RMS with 700-watt peak power for the Pair.
  • Aluminum Voice Coil: 1" Ohm Impedance: 4 Ohm Max. Input Power: 1000W.
  • Sensitivity: 93dB/1w/1m Magnet: 10 Oz Frequency response: 45 - 20, 000 Hz.
  • Injection Cone Woofer MidRange: 35mm (1. 38in) Mylar Dome Tweeter: 1" balanced dome tweeter.
Check Stock

1.5” Audio Car Tweeter Speaker - Aluminum Die-Cast Frame, 500 Watt Peak, 2 kHz - 25 kHz Frequency Response, 4 Ohm, Heavy Duty 30 oz. Magnet Structure - Pyle PDBT31 SILVER

  • 2 kHz - 25 kHz FREQUENCY RESPONSE: Pyramid’s 1'' car tweeter speaker has enhanced Ferrofluid and 2 kHz - 25 kHz frequency response that will complete a sound system of a car or woofer enclosure.
  • 500 WATT POWER: This bullet horn super tweeter speaker provides up to 500 watts peak power because it is equipped with 30 oz magnet structure. It's all housed in heavy duty aluminum housings.
  • 4 OHM IMPEDANCE: This car tweeter has 4 ohm impedance rating that compensates the undersized wire found in many of today’s cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • STANDARD SIZE: Pyramid follows the standard size for most car stereo systems and created this set with a 1” audio tweeter plus an aluminum frame. The heavy duty housing and structure provides a strong foundation.
  • SENSITIVITY: This titanium super tweeter is very easy to install with a capacitor crossover network and hardware. The sensitivity is 106dB and weighs 3.4 lbs.
Check Stock

Pyle PL63BL 6.5' 360W 3-Way Car Coaxial Speakers Audio Stereo, Blue (Pair) and PL6984BL 6x9' 400W 4-Way Car Coaxial Speakers Audio Stereo, Blue (Pair)

  • PYLE PL63BL: 6.5'' Three way 360 Watt Speaker Systems with Power Handling: 360 Watt MAX, 180 Watt RMS for peak performance.
  • 1'' High Temperature ASV Voice Coil for total quality sound.
  • DESIGN: Standard 6.5'' Size Fits OEM Locations.
  • Includes Grills, Wires And Mounting Hardware.
  • PL6984: 6'' X 9'' 400 Watt Four way Speaker Systems complete with Power Handling of 200 Watts Rms / 400 Watts Max for quality audio performance.
  • FEATURES: 1.25'' High Temperature ASV Voice Coil.
Check Stock

DS18 EN2T High Density Abs Universal A Pillar Pod 2 X 1 Tweeters (No Tweeters)

  • 300 Watt power: This high powered audio projection tweeter system has a maximum power output of 300 Watt peak power/ 150 Watt RMS so you can play your favorite tracks as loud as you want and with style.
  • 2kHz - 25 kHz frequency response: This car tweeter speaker is Ferro fluid enhanced and has a frequency response of 2kHz - 25 kHz that will complete your current car woofer enclosure system for full range stereo sound reproduction.
  • 4-8 Ohm Impedance: this car tweeter has 1” high temperature Kapton voice coil, 98 dB SPL and 4-8 Ohm Impedance Rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • Standard SIZE: Pyle Pro follows the standard size for most car stereo systems and created this 1 inch super titanium car audio tweeter speaker with 3.75 inch aluminum Bullet horn and has a 3.75” diameter and 2” mounting depth.
  • Strong structure: This pair of tweeters have 20 oz Magnet structure and comes with a Mylar capacitor Crossover network. The heavy duty housing and structure provides a strong foundation and it is super easy to Install.
Check Stock

Pyramid 1 Audio Car Tweeter Speaker - Aluminum Die-Cast Frame 300 Watt Peak 2k-20kHz Frequency Response 4 to 8 Ohm Heavy Duty 30 oz Magnet Structure - 1 Tweeter - Pyramid TW44 Black One Size

  • 2k-20kHz FREQUENCY RESPONSE: Pyramid’s 1'' car tweeter speaker has enhanced Ferro fluid and 2k-20kHz frequency response that will complete a sound system of a car or woofer enclosure.
  • 300 WATT POWER: This bullet horn super tweeter speaker provides up to 300 watts peak power because it is equipped with 30 oz. magnet structure. It's all housed in heavy duty aluminum housings.
  • 4-8 OHM IMPEDANCE: This car tweeter has 4 to 8 ohm impedance rating that compensates the undersized wire found in many of today’s cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • STANDARD SIZE: Pyramid follows the standard size for most car stereo systems and created this set with a 1” audio tweeter plus an aluminum frame. The heavy duty housing and structure provides a strong foundation.
  • 1 Tweeter comes with all the necessary which are very to install with a capacitor crossover network and hardware. The sensitivity is 104dB and weighs 2.71 lbs.
Check Stock

Audiobank AB-TW220 3.75 inch 600 Watt Car Audio Heavy Duty Compression Super Horn Tweeter/Die cast Aluminum Frame/Frequency Response: 2000 Hz - 20000 Hz

  • 300 WATT POWER: This high powered audio projection tweeter system has a maximum power output of 300-watt peak power / 150 watt RMS so you can play your favorite tracks as loud as you want and with style.
  • 2 kHz - 25 kHz FREQUENCY RESPONSE: This car tweeter speaker is ferrofluid enhanced and has a frequency response of 2k-25kHz that will complete your current car woofer enclosure system for full range stereo sound reproduction.
  • 4-8 OHM IMPEDANCE: This car tweeter has 96 dB SPL and 4/8 ohm impedance rating that compensates the undersized wire found in many of today’s cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • STANDARD SIZE: Pyramid follows the standard size for most car stereo systems and created this tweeter with 3.25" aluminum bullet horn w/1 inch super titanium tweeter. The heavy-duty housing and structure provides a strong foundation.
  • COMPLETE PAIR: This complete set includes a pair of aluminum die-cast super titanium tweeters with 30 oz magnet structure, capacitor crossover network, and mounting hardware which are very easy to install.
Check Stock