Reviews Tweeter Horn

Rockville HT120 2 360w Car/Pro Aluminum Horn Titanium Tweeter w/ 2 Voice Coil Black

  • What's in the Box: (1) HT120 Tweeter pre-Installed in an aluminum horn, Mounting Screws, Warranty Card, Owner's Manual.
  • Rockville HT120 360w Aluminum Horn Titanium Tweeter with 2" Voice Coil, Top of the line Rockville high frequency driver pre installed in an aluminum horn, Titanium diaphragm tweeter, Bolt-on style system, Type: Compression driver.
  • RMS Power: 120W, MAX Power: 360W, Sensitivity: 105dB @ 1w / 1m, 34 oz Magnet, 2” High Temperature Die Cast Kapton Voice Coil.
  • Ferro Fluid Enhanced Voice Coil Cooling, Impedance: 8 Ohms, Frequency Response: 800Hz - 20kHz, We recommend using a crossover that cuts frequencies below 1500 to 3000Hz at -12dB per octave, Our metal horns are heavier and a denser material which ensures they will not generate resonances and unwanted vibrations that can alter the response of the speaker. Also our metal horns will never break even if you go over bumps while driving.
  • Horn Dimensions: 6.2” x 6.2” x 5.1” (158 x 158 x 130 mm), Throat Diameter: 2", Overall Depth: 7.6” (193 mm), Cutout Diameter: 5.79”, Mounting Depth: 7.36”, Extremely loud and clear highs with an amazing frequency response that can even play some mids, Shallow Mounting Depth.
Check Stock

2\ Inch Titanium Horn Driver - 600W High Power Car Audio Midrange/Tweeter Compression Horn Driver System w/ Aluminum Voice Coil, 1.5kHz ~ 18kHz Frequency,102dB, 8 Ohm, 13.5oz Magnet - Pyle PDS541

  • 600 WATT POWER: This high powered audio projection midrange/tweeter system has a maximum power output of 600-watt peak power / 150 watt RMS so you can play your favorite tracks as loud as you want and with style.
  • 1.5kHz-18kHz FREQUENCY RESPONSE: The car tweeter compression driver has a frequency response of 1.5kHz ~ 18kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction. Fits horns w/ 1 3/8" x 18 TPI threads.
  • 8 OHM IMPEDANCE: This car tweeter has 2" flat aluminum voice coil, 102dB @ 1W/ 1M, & 8ohm impedance rating that compensates the undersized wire found in most cars. Reduces distortion so you can enjoy crisp & clear sound.
  • 2” TITANIUM DIAPHRAGM: PylePro follows the standard size for most car stereo systems & created this midrange/tweeter compression horn driver with 2-inch titanium diaphragm. This high power tweeter compression horn will get you higher than high.
  • 60 OZ MAGNET STRUCTURE: These tweeters have a 60 oz magnet structure. The heavy-duty housing provides a strong foundation & is easy to install to your car's sound system. Provides crispest, most accurate highs possible w/ modern speaker technology.
  • Midrange/Tweeter compression horn driver.
Check Stock

4x10 Inch Horn Tweeter Speaker - Heavy Duty 200 Watt High Power Horn Audio Tweeter System w/ 25mm Voice Coil, 20 Oz Magnet Structure, 102 dB, 8 Ohm Impedance - Pyle PH391

  • 200 WATT POWER: This high powered audio projection horn tweeter system has a maximum power output of 200-watt peak power so you can play your favorite tracks as loud as you want and with style.
  • 1kHz - 15 kHz FREQUENCY RESPONSE: This car horn tweeter speaker has a frequency response of 1kHz - 15 kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction.
  • 8 OHM IMPEDANCE: This car tweeter has 102dB/w/m sensitivity and 8-ohm impedance rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • 25mm VOICE COIL: Pyle Pro follows the standard size for most car stereo systems and created this 4” x 10” horn car audio tweeter speaker with 25mm voice coil size.
  • 20 OZ MAGNET: This tweeter has a 20 oz magnet structure w/ heavy-duty housing that provides a strong foundation. It is super easy to install in your vehicle’s sound system. Total dimension measures 4.3” H x 10.6” W x 8.25” D.
Check Stock

KLH Kendall 3-Way Floorstanding Speaker - Each (Walnut)

  • 2 Pack R-610F Floorstanding Home Speaker - Grille (installed) - 2 Feet - 4 Screws - Quick Setup Guide - Warrant.
  • TRACTRIX HORN TECHNOLOGY - Klipsch exclusive 90x90 Tractrix horn technology ensures that the R-610F high frequency energy is aimed at the listener and reduces artificial reverb or filtering caused by indirect sound bouncing off of walls. Using this proprietary focused technology gives you the best clarity, dynamics, and detail.
  • Klipsch exclusive Linear Travel Suspension (LTS) - aluminum tweeter minimizes distortion for enhanced, detailed performances. Using Kapton, an extremely light and rigid material, in the tweeter suspension provides high efficiency and improve resolution and detail. LTS tweeters are a hallmark of Klipsch speakers.
  • SPUN COPPER IMG WOOFERS - Injection Molded Graphite (IMG) woofer cones are exceptionally light while being extremely rigid providing remarkable low frequency response, with minimal cone breakup and distortion. When paired with the Tractrix Horn-Loaded LTS Tweeter, it provides speaker efficiency highest in its class..
  • REAR TRACTRIX PORT - The rear Tractrix port is perfectly matched to the cabinet and woofers, creating ideal airflow with minimal distortion or turbulence even at the lowest frequencies..
Check Stock

Klipsch Reference R-610F Floorstanding Speakers, Black, Pair

  • 2 Pack R-610F Floorstanding Home Speaker - Grille (installed) - 2 Feet - 4 Screws - Quick Setup Guide - Warrant.
  • TRACTRIX HORN TECHNOLOGY - Klipsch exclusive 90x90 Tractrix horn technology ensures that the R-610F high frequency energy is aimed at the listener and reduces artificial reverb or filtering caused by indirect sound bouncing off of walls. Using this proprietary focused technology gives you the best clarity, dynamics, and detail.
  • Klipsch exclusive Linear Travel Suspension (LTS) - aluminum tweeter minimizes distortion for enhanced, detailed performances. Using Kapton, an extremely light and rigid material, in the tweeter suspension provides high efficiency and improve resolution and detail. LTS tweeters are a hallmark of Klipsch speakers.
  • SPUN COPPER IMG WOOFERS - Injection Molded Graphite (IMG) woofer cones are exceptionally light while being extremely rigid providing remarkable low frequency response, with minimal cone breakup and distortion. When paired with the Tractrix Horn-Loaded LTS Tweeter, it provides speaker efficiency highest in its class..
  • REAR TRACTRIX PORT - The rear Tractrix port is perfectly matched to the cabinet and woofers, creating ideal airflow with minimal distortion or turbulence even at the lowest frequencies..
Check Stock

Pyle-Pro 4x4 Inch Speaker-Heavy Duty 150 Watt High Power Horn Audio Tweeter System w/ 25mm Voice Coil, 15 Oz Magnet Structure, 1kHz-18 kHz Frequency, 105 dB, 8 Ohm Impedance-Pyle (PH44)

  • 150 WATT POWER: This high powered audio projection horn tweeter system has a maximum power output of 150-watt peak power so you can play your favorite tracks as loud as you want and with style.
  • 1kHz - 18 kHz FREQUENCY RESPONSE: This car horn tweeter speaker has a frequency response of 1kHz - 18 kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction.
  • 8 OHM IMPEDANCE: This car tweeter has 105dB/w/m sensitivity and 8-ohm impedance rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • 25mm VOICE COIL: Pyle Pro follows the standard size for most car stereo systems and created this 4” x 4” horn car audio tweeter speaker with 25mm voice coil size.
  • 15 OZ MAGNET: This tweeter has a 15 oz magnet structure w/ heavy-duty housing that provides a strong foundation. It is super easy to install in your vehicle’s sound system. Total dimension measures 4.5” H x 4.5” W x 4.45” D.
Check Stock

Timpano Horn Driver TPT-DH175 150W 1\ Ferrite Compression Horn Driver 8 Ohm (Single)

  • Speaker size: 3.75" Type: Super Horn Tweeter Peak power: 600 Watts Tweeter composition: Aluminum dome.
  • Tweeter size: 3.75" Impedance: 8 ohms Sensitivity: 99 dB Frequency response: 2000 Hz - 20000 Hz.
  • System: Tweeter Protection: Aluminum frame Voil coil: Aluminum Composition: Die cast aluminum.
  • Tweeter design: Titanium super tweeter Mounting depth: 1" Diameter: 3.75".
  • Die cast aluminum frame Tweeters are made from durable materials Spade tweeter terminals for easy installations.
Check Stock

Klipsch Reference Next-Generation R-50C Horn-Loaded Center Channel Speakers for Crystal-Clear Home Theater Dialogue in Black

  • ALL NEW 90° x 90° TRACTRIX HORN: Experience the cleanest, most natural sound possible. The increased outer horn dimensions allow for directivity control over a larger bandwidth of frequencies, resulting in improved high frequency directivity and a more accurate sound stage..
  • LINEAR TRAVEL SUSPENSION (LTS) ALUMINUM TWEETER WITH KAPTON SUSPENSION: The 1” LTS tweeter minimizes distortion for enhanced, detailed performances. Aluminum is an extremely light and rigid material used in the tweeter assembly to provide high efficiency and improve resolution and detail..
  • SPUN-COPPER THERMOFORMED CRYSTALLINE POLYMER WOOFERS: Utilizing trickle-down technology from Klipsch’s highly acclaimed Reference Premiere series, the 5.25” TCP woofers have steeper angling of the cones for a smoother response and improved accuracy and transparency..
  • HEAR EVERY WORD: Tapered array crossovers improve dispersion, resulting in better midrange definition to catch every bit of dialogue..
  • SLEEK, MODERN APPEARANCE: Hidden fasteners, edge-to-edge horn, and low-profile magnetic grilles give the speakers a polished, modern appearance..
Check Stock

Pyle Pair 10” Flush Mount in-Wall in-Ceiling 2-Way Speaker System Spring Loaded Quick Connections Changeable Round/Square Grill Stereo Sound Polypropylene Cone Polymer Tweeter 300 Watts (PDIC16106)

  • 1-inch aluminum tweeter mated to a square 90-degree by 60-degree pivoting Tractrix Horn.
  • Horn-loaded technology increases acoustic output while significantly reducing distortion.
  • Pivoting Tractrix Horn tweeter for clear sound in any location.
  • Treble attenuation switch and IR receiver knock out.
Check Stock

3.75'' Titanium Horn Tweeter (Pair) - Aluminum Bullet Diamond Chrome Cutting Finish w/ 300 Watt Peak 20 oz Magnet Structure 2kHz - 25kHz Frequency Response 4 Ohm & 1\ Kapton Voice Coil - Pyle PDBT18

  • 2kHz - 25kHz FREQUENCY RESPONSE: Pyle, 3.75'' aluminum bullet titanium horn tweeter has a 20 oz magnet structure, ferrofluid enhanced voice coil and frequency response. This car speaker is pack with exceptional 99dB (1w/1m) decibel sensitivity.
  • 1'' KAPTON VOICE COIL: Pyle car sound speaker system is capable of 1'' high-temperature kapton voice coil. It will increase performance and efficiency of heavy-duty play time through lower weight and higher operating temperatures.
  • 150W RMS AND 300W PEAK: This car speaker can provide up to 150 watts RMS or 300 watts peak power because it is 20 oz magnet structure. A pair of round 3.75'' 300 watt tweeters - carrying both the high and low end for a fuller range sound.
  • CHROME CUTTING FINISH: This car speaker super tweeter is diamond chrome cutting finish. The tweeter measures 3.75'' in overall diameter in a mounting depth at 2''. The product includes mylar crossover capacitor.
  • LOUD AND CLEAR: Pyle car speaker super tweeter were carefully combined to reproduce sound clearly with outstanding responsiveness. It features solid construction and accurate power handling ratings.
  • 3.75 Aluminum horn with 1 super bullet tweeter.
Check Stock

Goldwood Sound 90 Watts 8ohm Piezo Horn Speaker Tweeter Black (GT-1056)

  • 1 Goldwood Sound GT-1056 piezo horn tweeter, 60 watts RMS and 90 watts max, 3500 - 30,000Hz frequency response.
  • 96dB SPL, 8ohm, ceramic driver, wide dispersion ABS horn, replacement for Motorola KSN1056A.
  • Overall size is 3.875" round, fits hole size of 2.75", mounting depth is 2.5", designed and engineered in the USA.
  • Use for DJ speaker, PA speaker, karaoke speaker, live sound speaker, fixed installation speaker, studio monitor and home audio speaker.
  • This listing and price is for 1 Goldwood GT-1056 pro audio tweeter.
Check Stock

Goldwood Sound 90 Watts 8ohm Piezo Horn Speaker Tweeter Black GT-1025

  • 1 Goodwood Sound GT-1025 pies Horn tweeter, 60 watts RMS and 90 watts max, 1800 - 30, 000Hz frequency response.
  • 90dB SPL, 8ohm, ceramic driver, wide dispersion ABS horn, replacement for Motorola KSN1025A.
  • Overall size is 3. 1875" X 7. 375", fits hole size of 2. 125" X 6. 125" With 2. 5" Offset hole, mounting depth is 4. 25", designed and engineered in the USA.
  • Use for DJ speaker, pa speaker, Karaoke speaker, live sound speaker, fixed installation speaker, studio monitor and home Audio speaker.
  • This Listing and price is for 1 gold wood GT-1025 Pro Audio tweeter.
Check Stock

MTX TP1200 Audio ThunderPro II 2-Way Professional Loudspeaker

  • Boasts 300 watts of peak power and 150 watts of RMS power.
  • Features 12-inch woofer with 1-inch horn loaded tweeter.
  • 5-way binding posts and 0.25-inch input jack make connection to an amplifier simple.
  • Dimensions (L x W x H): 12.75 x 15.18 x 26.06 inches.
  • High excursions ported woofer configurations.
  • Metal grille protects drivers from damage.
  • Rugged corner braces protect corners and interlock when units are stacked.
  • Durable MDF enclosure is covered with aviation grade carpet.
Check Stock