Reviews Non marring Pilot Counterbore

Drill America DEWCBR Series Qualtech High-Speed Steel Aircraft Counterbore 1/4 Shank Diameter 3/32 Pilot 2-3/8 Length 3/8 Size Pack of 1

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Round shanks allow use with a wide variety of toolholding systems.
  • Counterboring is the enlargement of a portion of a hole that has previously been formed.
  • The counterbor is a two-piece construction, having an integral shank and counterbore-cutter, and a pilot that is interchangeable, which provides flexibility in the use of the tool.
Check Stock

Drill America - DEWA/CCBR9/16 DEWCBR Series Qualtech High-Speed Steel Aircraft Counterbore, 1/4\ Shank Diameter, 1/8\ Pilot, 2-13/16\ Length, 9/16\ Size (Pack of 1)

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Round shanks allow use with a wide variety of toolholding systems.
  • Counterboring is the enlargement of a portion of a hole that has previously been formed.
  • The counterbor is a two-piece construction, having an integral shank and counterbore-cutter, and a pilot that is interchangeable, which provides flexibility in the use of the tool.
Check Stock

Akozon 5pcs M3-M8 Pilot Slotting Counterbore Mould End Mill Cutter Solid Slot Countersink End Mill Drill Bit

  • 【Main purpose】: Countersunk end mill is a specially manufactured tool, mainly used to cut holes that allow bolts or screw heads to be screwed into..
  • 【High precision】: The cutting hole and bottom hole of this tool have high alignment accuracy. Because of its high production efficiency, it is often used in the machining industry..
  • 【High-quality and durable】: The Pilot Counterbore End Mill Cutters is made of hard high-speed steel, with high toughness, wear resistance, and high hardness for high-speed cutting.
  • it is usually used for assembly on a milling machine..
  • 【More time-saving】: Countersunk cutters reduce the time to change tools, improve the efficiency of machine actuator movement and save manufacturing time..
  • 【Wide range of applications】: Counterbore bit set is suitable for milling of copper, aluminum, steel, cast iron, etc., and can be directly processed or finely processed to heat treatments..
Check Stock

Bessey BES8511 Face Frame Clamp Pair

  • Includes two (2) BES8511 Face Frame Cabinetry Clamps.
  • Tighten, align, pre-drill and fasten your cabinet stile, all without having to re-position or remove your clamp!.
  • Equipped with pilot-hole drill guide that can be flipped out of the way to drive in the screw once the pilot hole is drilled..
  • Clamp specifications: works on stiles up to 1-1/4 in. thick.
  • Comes with non-marring felt pads for clamp faces and alignment plate to protect and cushion the points of contact on your cabinet..
Check Stock

8 Pack Woodworking Countersink Drill Bits Set 3in1 Heavy Duty M2 Pilot Drill Bits Depth Adjustable 82-Degree Chamfer 1/4” Hex Shank for #4#6#8#10#12#14 Screws in Soft & Hard Wood

  • 3in1 Countersink Drill Bit Set – Enable you to Drill, Countersink and Counterbore in one step, ideal woodworking tools for setting screws flush with....
  • Meet All Your Needs–8 pcs Countersink drill bits assortment in size 5/64”, 3/32”, 7/64”, 1/8” (x2), 9/64” (x2), 5/32” for perfect....
  • Easy To Use–3 sharp edged 82-degree chamfer design Counter sink bits built with 1/4" Hex Shanks with groove for quick size changes without bit....
  • Drilling Depth Adjustable–Extra Pilot bits included.
  • Working length of the pilot drill bit is adjustable for precise depth control.
  • Compatible with More Materials – Pilot bits are made of high quality M2 steel, countersink bits make of high carbon steel, able to drill in hard....
Check Stock

BOSCH SP515 5 Piece Hex Shank Countersink Drill Bit Set with #6 #8 #10 and #12

  • VERSATILITY: Bosch hex shank countersink bits feature adjustable depths and provide precise, clean pilot holes in wood, plastic and composite materials.
  • 3 in 1: Drill, Countersink and Counterbore in one step.
  • UNIVERSAL FIT: The Bosch SP515 countersink set fits all Bosch and competitive brands drill/drivers.
  • USE WITH: For use with Allen wrench (included in set).
  • the hex shanks fit 3/8 in. and 1/2 in. corded and cordless drills.
  • ACCESSORIES: Replaceable bits offered (sold separately).
Check Stock

Drill America - DEWPIL1/4X3/16 DEWCBR Series Qualtech High-Speed Steel Pilot for Counterbore, 3/16\ Shank Diameter, 1-3/4\ Length, 1/4\ Size (Pack of 1)

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Available in 1-3/4-inches overall length.
Check Stock

uxcell Knurled Insert Nuts, M8 x 10mm(L) x 10mm(OD) Female Thread Brass Embedment Assortment Kit, 5 Pcs

  • [SIZE] - M8x1.25mm thread size, 0.39" (10mm) long, 0.39" 10mm outer diameter ,OD tolerance: +0.02"/0"..
  • [MATERIAL] - Made of brass, rust resistance, good thermal conductivity and heat resistance, can ensure long time using..
  • [FEATURE] - Can be installed by ultrasonic or heat into thread tapered hole, or in during injection..
  • [ADVANTAGE] - No need to counterbore or countersink the boss hole since the insert has guide pilot..
  • [APPLICATION] - Widely used on injection for fastening..
Check Stock

Drill America DEWCBR Series Qualtech High-Speed Steel Counterbore, 1/2\ Shank Diameter, 3/16\ Pilot, 5-1/8\ Length, 5/8\ Size (Pack of 1)

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Round shanks allow use with a wide variety of toolholding systems.
  • Counterboring is the enlargement of a portion of a hole that has previously been formed.
  • The counterbor is a two-piece construction, having an integral shank and counterbore-cutter, and a pilot that is interchangeable, which provides flexibility in the use of the tool.
Check Stock

DEWALT Drill Bit, #10 Countersink, 3/16-Inch (DW2539)

  • Drill, countersink and counterbore in one step with this drill bit.
  • Four-cutter countersink and tapered drill bits for wood, metal and plastic provide superior speed and ideal finish.
  • Replacement tapered bits offered for DEWALT drill bits.
  • Drill, countersink and counterbore in one step.
  • Four-cutter countersink and tapered drill bit provide superior speed and ideal finish.
Check Stock

Accusize Industrial Tools H.S.S Solid Cap Screw Counterbore Set 3 Flute Straight Shank 7 Pc 508S-0007

  • Inch Set (7 PC) : 6#, 8#, 10#, 1/4'', 5/16'', 3/8'', 1/2''.
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock

Accusize Industrial Tools 7 Pc Metric Hss Solid Capscrew Counterbore Set 3 Flute Straight Shank 508S-007m

  • Metric Set (7PC): M3, M4, M5, M6, M8, M10, M12. 3 Flute..
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock

Accusize Industrial Tools Premium Metric H.S.S Solid Cap Screw Counterbore Set 3 Flute Straight Shank 7 Pc 509S-007M

  • High Speed Steel. Straight Shank. Metric Set(7 Pcs/Set): M3, M4, M5, M6, M8, M10, & M12.
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock