Reviews Cobalt Pilot Counterbore

Drill America DEWCBR Series Qualtech High-Speed Steel Aircraft Counterbore 1/4 Shank Diameter 3/32 Pilot 2-3/8 Length 3/8 Size Pack of 1

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Round shanks allow use with a wide variety of toolholding systems.
  • Counterboring is the enlargement of a portion of a hole that has previously been formed.
  • The counterbor is a two-piece construction, having an integral shank and counterbore-cutter, and a pilot that is interchangeable, which provides flexibility in the use of the tool.
Check Stock

Drill America - DEWA/CCBR9/16 DEWCBR Series Qualtech High-Speed Steel Aircraft Counterbore, 1/4\ Shank Diameter, 1/8\ Pilot, 2-13/16\ Length, 9/16\ Size (Pack of 1)

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Round shanks allow use with a wide variety of toolholding systems.
  • Counterboring is the enlargement of a portion of a hole that has previously been formed.
  • The counterbor is a two-piece construction, having an integral shank and counterbore-cutter, and a pilot that is interchangeable, which provides flexibility in the use of the tool.
Check Stock

Akozon 5pcs M3-M8 Pilot Slotting Counterbore Mould End Mill Cutter Solid Slot Countersink End Mill Drill Bit

  • 【Main purpose】: Countersunk end mill is a specially manufactured tool, mainly used to cut holes that allow bolts or screw heads to be screwed into..
  • 【High precision】: The cutting hole and bottom hole of this tool have high alignment accuracy. Because of its high production efficiency, it is often used in the machining industry..
  • 【High-quality and durable】: The Pilot Counterbore End Mill Cutters is made of hard high-speed steel, with high toughness, wear resistance, and high hardness for high-speed cutting.
  • it is usually used for assembly on a milling machine..
  • 【More time-saving】: Countersunk cutters reduce the time to change tools, improve the efficiency of machine actuator movement and save manufacturing time..
  • 【Wide range of applications】: Counterbore bit set is suitable for milling of copper, aluminum, steel, cast iron, etc., and can be directly processed or finely processed to heat treatments..
Check Stock

Sabre Tools 5/16 Inch Cobalt Drill Bits – 5pcs Drill Bits for Metal, M35 Cobalt Metal Drill Bit Set, Pilot Point Tip – Heavy-Duty Drill Bits for Steel, Hard Metal, Cast Iron (5/16" x 4-1/2")

  • What You Get: This drill bit set for metal includes 5 – 5/16 Inch x 4-1/2 Inch bits of the same size..
  • A Must in Your Tool Box: This cobalt drill bit set is designed to surpass your expectations in terms of durability and performance, ensuring fast and easy penetration through hard metals..
  • Heavy-Duty Material: Our drill bits for hardened steel feature a heavy-duty construction made with M35 cobalt, which has excellent durability and superior resistance against abrasion and high heat..
  • Pilot Point Tip: These cobalt drill bits feature a pilot point tip that prevents slipping and can help increase drilling speed while ensuring smooth and easy penetration through hard metals..
  • Wide Range of Applications: Our cobalt drill bits for hardened steel are suitable for hard metals, stainless steel, cast iron, steel, titanium alloy, hard plastics and more, and a wide range of applications such as repair, construction, or woodworking..
Check Stock

8 Pack Woodworking Countersink Drill Bits Set 3in1 Heavy Duty M2 Pilot Drill Bits Depth Adjustable 82-Degree Chamfer 1/4” Hex Shank for #4#6#8#10#12#14 Screws in Soft & Hard Wood

  • 3in1 Countersink Drill Bit Set – Enable you to Drill, Countersink and Counterbore in one step, ideal woodworking tools for setting screws flush with....
  • Meet All Your Needs–8 pcs Countersink drill bits assortment in size 5/64”, 3/32”, 7/64”, 1/8” (x2), 9/64” (x2), 5/32” for perfect....
  • Easy To Use–3 sharp edged 82-degree chamfer design Counter sink bits built with 1/4" Hex Shanks with groove for quick size changes without bit....
  • Drilling Depth Adjustable–Extra Pilot bits included.
  • Working length of the pilot drill bit is adjustable for precise depth control.
  • Compatible with More Materials – Pilot bits are made of high quality M2 steel, countersink bits make of high carbon steel, able to drill in hard....
Check Stock

BOSCH SP515 5 Piece Hex Shank Countersink Drill Bit Set with #6 #8 #10 and #12

  • VERSATILITY: Bosch hex shank countersink bits feature adjustable depths and provide precise, clean pilot holes in wood, plastic and composite materials.
  • 3 in 1: Drill, Countersink and Counterbore in one step.
  • UNIVERSAL FIT: The Bosch SP515 countersink set fits all Bosch and competitive brands drill/drivers.
  • USE WITH: For use with Allen wrench (included in set).
  • the hex shanks fit 3/8 in. and 1/2 in. corded and cordless drills.
  • ACCESSORIES: Replaceable bits offered (sold separately).
Check Stock

Drill America - DEWPIL1/4X3/16 DEWCBR Series Qualtech High-Speed Steel Pilot for Counterbore, 3/16\ Shank Diameter, 1-3/4\ Length, 1/4\ Size (Pack of 1)

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Available in 1-3/4-inches overall length.
Check Stock

Drill Hulk 7-Piece M35 Cobalt Left Hand Drill Bit Set for Removing Damaged Bolts and Screws, 5/64-Inch, 7/64-Inch, 5/32-Inch, 1/4-Inch, 19/64-Inch

  • STUBBY MECHANICS LENGTH: 135 degree split point reduces drill walking, straight shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for removing damaged bolts and screws, or drilling a pilot hole for a screw extractor.
  • INCLUDE: 2pcs 5/64 inch, 2pcs 7/64 inch, 1pc 5/32 inch, 1pc 1/4 inch and 1pc 19/64 inch cobalt left hand drill bits with case.
Check Stock

uxcell Knurled Insert Nuts, M8 x 10mm(L) x 10mm(OD) Female Thread Brass Embedment Assortment Kit, 5 Pcs

  • [SIZE] - M8x1.25mm thread size, 0.39" (10mm) long, 0.39" 10mm outer diameter ,OD tolerance: +0.02"/0"..
  • [MATERIAL] - Made of brass, rust resistance, good thermal conductivity and heat resistance, can ensure long time using..
  • [FEATURE] - Can be installed by ultrasonic or heat into thread tapered hole, or in during injection..
  • [ADVANTAGE] - No need to counterbore or countersink the boss hole since the insert has guide pilot..
  • [APPLICATION] - Widely used on injection for fastening..
Check Stock

1/8 Inch Cobalt Drill Bits(10Pcs), HPHOPE M35 HSS Metal Twist Drill Bits Set, Jobber Drill Bits Length and Straight Shank, Suitable for Drilling in Hard Metal, Stainless Steel, Cast Iron

  • 【M35 COBALT HIGH SPEED STEEL】1/8" drill bits for metal made from M35 Cobalt High Speed Steel and contain 5% Cobalt, which increases wear-resistance, durability and extra longer life span, so that the drill bits last through multiple uses.
  • 【135° SPLIT POINT】135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. Straight shank of this cobalt steel drill bit allows for firmly holding and accurate centering and makes drilling precise and faster.
  • 【FULLY GROUND PROCESS】Fully ground spiral groove design clears particles quickly, decreases friction and heat for faster drilling performance.
  • 【PROFESSIONAL & WIDELY USE】Jobber drill bits perfectly Suitable for drilling holes as Stainless Steel, Copper, Cast Iron, Galvanized Pipe, Aluminum Alloy, Wood and Other Softer Metals. Not for Glass or Ceramic Materials.
  • 【EASY USE & STORAGE】This metal twist drill bits set includes 10pcs 1/8" Cobalt Drill Bits, This drill bit fits the majority of power drill currently on the market and come with a portable plastic case for easy storage and DIY, household maintenance and repair.
Check Stock

Drill America DEWCBR Series Qualtech High-Speed Steel Counterbore, 1/2\ Shank Diameter, 3/16\ Pilot, 5-1/8\ Length, 5/8\ Size (Pack of 1)

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Round shanks allow use with a wide variety of toolholding systems.
  • Counterboring is the enlargement of a portion of a hole that has previously been formed.
  • The counterbor is a two-piece construction, having an integral shank and counterbore-cutter, and a pilot that is interchangeable, which provides flexibility in the use of the tool.
Check Stock

Chicago-Latrobe 550 115 Piece Heavy-Duty Cobalt Steel Jobber Length Drill Bit Set, Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degree Point Angle

  • Manufactured to NAS 907 Type J geometry aerospace specifications with self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging and gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • Heavy duty construction for increased strength and rigidity compared to standard drill bits.
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
Check Stock

Bosch HSBIM9 General-Purpose 9 pc. Bi-Metal Hole Saw Kit

  • All-in-one kit – features two SpinLOCK Universal arbors, steel pilot bit and six hole saws with Progressor tooth design.
  • SpinLOCK universal arbor – fits all brands and sizes to simplify diameter changes with fast plug removal and tool-free install.
  • The pilot bit – designed to start holes in a variety of materials.
  • Progressor tooth design – hole saws feature alternating teeth size for performance, cutting faster and lasting longer in wood, metal and plastic materials.
  • Durable hole saw material – hole saws are made with 8% cobalt alloy.
Check Stock