6-1-2 Inch 200 Watt 2-Way Component Speakers
- NAKAMICHI NSM8517 || SPECIFICATIONS || Type : Mid Range Speakers (*) Size : 8'' (20.3cm) (*) Peak Power : 400W (*) N-Power : 60W (*).
- Frequency Response : 85-12k Hz (*) Sensitivity (dB/W/m) : 93±3dB (*) Impedance : 4Ω (*) Mounting Depth : >3.3" (84mm) (*).
- Voice Coil : KSVΦ30.5mm Magnet Mass : 21.6 Oz (613g) (*) Net Weight(1pr) : Approx. 2.7kg.
- Nakamichi NSM8517 8 in. 400 Watt Peak Mid Range Speakers The Nakamichi mobile audio department was created as part of an ongoing tradition to provide the same quality and performance from their home audio range into the mobile audio industry..
- Established since 2004, our small team has since grown Nakamichi from a small player in the mobile audio industry to a medium sized company with a full range of products..
Check StockReplacement Remote Control Controller for Nakamichi Shockwafe Ultra 9.2.4 Channel 1000W Soundbar
- Replaced Remote Control For Nakamichi Shockwafe Ultra 9.2.4 Channel 1000W Soundbar.
- No programming is required. Just install new alkaline batteries and it is ready for use..
- Power Supply: 2X 1.5V AAA Alkaline Battery.
- ONLY WORKS WITH NAKAMICHI SHOCKWAFE 7.1, 7.2 and 9.2 DTSX/DOLBY ATMOS/SSE soundbar systems. WILL NOT WORK WITH OTHER NAKAMICHI SOUNDBARS..
Check StockReplacement Remote Control Controller for Nakamichi Shockwafe Elite 7.2.4 Channel 800W Soundbar
- Replaced Remote Control For Nakamichi Shockwafe Elite 7.2.4 Channel 800W Soundbar.
- No programming is required. Just install new alkaline batteries and it is ready for use..
- Power Supply: 2X 1.5V AAA Alkaline Battery.
- ONLY WORKS WITH NAKAMICHI SHOCKWAFE 7.1, 7.2 and 9.2 DTSX/DOLBY ATMOS/SSE soundbar systems. WILL NOT WORK WITH OTHER NAKAMICHI SOUNDBARS..
Check StockNakamichi Shockwafe 7.1 7.2 9.2 DTS:X/Atmos/SSE Soundbar Remote (Does not Work w Other Models)
- Remote control for Nakamichi Shockwafe 7.1, 7.2, 9.2 DTS:X/Dolby Atmos SSE Soundbars.
- Will not work with Nakamichi Shockwafe Pro 7.1Ch 400W 45" Sound Bar with 8" Subwoofer (Wireless) and Rear Satellite Speakers or ANY OTHER Nakamichi soundbars systems, only the DTSX and SSE and Atmos series.
Check Stock4 Pcs Braided Wire Speaker Banana Plugs Audio Jack Connector for Speaker Cable 2 Pcs Black and 2 Pcs Red
- PACKAGE INCLUDED: 4 pcs total (2 black + 2 red)..
- HIGH QUALITY: 24 k gold plated Nakamichi banana plug. Gold plated connectors ensure perfect signal and quality sound..
- EAST TO USE: These Nakamichi braided wire speaker banana plugs audio jack connector for speaker cables spade plugs make speaker wire installation....
- SECURE CONNECTION: Not only do spade plugs make it easier to plug in bare wires, it's also safer this way with no chance of wires crossing creating a....
- COMPATIBILITY: Accepts wire size up to 4mm. Accepts 8AWG to 20AWG speaker wire.Double screws locking, no soldering. These Nakamichi banana plugs are....
Check StockReplacement Remote Control Controller for Nakamichi NK6 Soundbar
- Replaced Remote Control For Nakamichi Sound Bar NK6 Soundbar Speaker System.
- No programming is required. Just install new alkaline batteries and it is ready for use..
- Power Supply: 2X 1.5V AAA Alkaline Battery.
- Only works with model in photo, will not work with other Nakamichi soundbars..
Check StockNTQinParts Replacement Remote Control Controller for Nakamichi Shockwafe Pro 7.1.4, Shockwafe Elite 7.2.4, Shockwafe Ultra 9.2.4 Sound Bar (2022)
- Replaced Remote Control For Nakamichi Shockwafe Pro 7.1.4, Shockwafe Elite 7.2.4, Shockwafe Ultra 9.2.4 Sound Bar (2022).
- No programming is required. Just install new alkaline batteries and it is ready for use..
- Power Supply: 2X 1.5V AAA Alkaline Battery.
- Only works with model in photo, will not work with other Nakamichi soundbars..
Check StockNakamichi NSM8517 8 in. 400 Watt Peak Mid Range Speakers
- NAKAMICHI NBF618S-II SPECIFICATIONS : N-Power: 100W | Peak Power: 650W | Distortion (THD): <0.2% | Signal To Noise Ratio: >90dB | Frequency Response: 20Hz-150Hz | Input Sensitivity, High Level: 0.5V | Input Sensitivity, Low Level: 110mV | Low Pass Filter: 50Hz-180Hz | Bass Boost: 0 to -12dB | Fuse Rating: 20A(Fixed) | Subwoofer: 6×9”, 2 ohm | Unit Dimension: 290x210x73mm.
- Featuring 100 watts of RMS power driving a 6x8 inch woofer.
- At just 72mm in height, the NBF618S can easily fit beneath most seats, including the newer electrical seats that come with most vehicles nowadays, ensuring easy compatibility..
- Compatible with both high and low level inputs for both factory supplied units or aftermarket units. Add on a Nakamichi DSP for even more tuning possibilities..
Check StockReplacement Remote for NAKAMICHI NK6 Standard v1
- Direct Replacement for NAKAMICHI NK6 remote control.
Check StockReplacement Remote for NAKAMICHI NK12 HiFi
- Direct Replacement for NAKAMICHI NK12 remote control.
Check StockNakamichi SP-T13 13mm KSV Tweeter System Pair
Check StockNakamichi NE-8EQ Car Audio Line Output Converter w/ 8 Band EQ Channel Summing
Check StockReplacement Remote Control Controller for Nakamichi Shockwafe Pro 7.1.4 Channel 600W Soundbar
- Replaced Remote Control For Nakamichi Shockwafe Pro 7.1.4 Channel 600W Soundbar.
- No programming is required. Just install new alkaline batteries and it is ready for use..
- Power Supply: 2X 1.5V AAA Alkaline Battery.
Check Stock