Reviews Nakamichi 1s

Replacement Remote Control Controller for Nakamichi Shockwafe Ultra 9.2.4 Channel 1000W Soundbar

  • Replaced Remote Control For Nakamichi Shockwafe Ultra 9.2.4 Channel 1000W Soundbar.
  • No programming is required. Just install new alkaline batteries and it is ready for use..
  • Power Supply: 2X 1.5V AAA Alkaline Battery.
  • ONLY WORKS WITH NAKAMICHI SHOCKWAFE 7.1, 7.2 and 9.2 DTSX/DOLBY ATMOS/SSE soundbar systems. WILL NOT WORK WITH OTHER NAKAMICHI SOUNDBARS..
Check Stock

Replacement Remote Control Controller for Nakamichi Shockwafe Elite 7.2.4 Channel 800W Soundbar

  • Replaced Remote Control For Nakamichi Shockwafe Elite 7.2.4 Channel 800W Soundbar.
  • No programming is required. Just install new alkaline batteries and it is ready for use..
  • Power Supply: 2X 1.5V AAA Alkaline Battery.
  • ONLY WORKS WITH NAKAMICHI SHOCKWAFE 7.1, 7.2 and 9.2 DTSX/DOLBY ATMOS/SSE soundbar systems. WILL NOT WORK WITH OTHER NAKAMICHI SOUNDBARS..
Check Stock

Nakamichi Shockwafe 7.1 7.2 9.2 DTS:X/Atmos/SSE Soundbar Remote (Does not Work w Other Models)

  • Remote control for Nakamichi Shockwafe 7.1, 7.2, 9.2 DTS:X/Dolby Atmos SSE Soundbars.
  • Will not work with Nakamichi Shockwafe Pro 7.1Ch 400W 45" Sound Bar with 8" Subwoofer (Wireless) and Rear Satellite Speakers or ANY OTHER Nakamichi soundbars systems, only the DTSX and SSE and Atmos series.
Check Stock

4 Pcs Braided Wire Speaker Banana Plugs Audio Jack Connector for Speaker Cable 2 Pcs Black and 2 Pcs Red

  • PACKAGE INCLUDED: 4 pcs total (2 black + 2 red)..
  • HIGH QUALITY: 24 k gold plated Nakamichi banana plug. Gold plated connectors ensure perfect signal and quality sound..
  • EAST TO USE: These Nakamichi braided wire speaker banana plugs audio jack connector for speaker cables spade plugs make speaker wire installation....
  • SECURE CONNECTION: Not only do spade plugs make it easier to plug in bare wires, it's also safer this way with no chance of wires crossing creating a....
  • COMPATIBILITY: Accepts wire size up to 4mm. Accepts 8AWG to 20AWG speaker wire.Double screws locking, no soldering. These Nakamichi banana plugs are....
Check Stock

Replacement Remote Control Controller for Nakamichi NK6 Soundbar

  • Replaced Remote Control For Nakamichi Sound Bar NK6 Soundbar Speaker System.
  • No programming is required. Just install new alkaline batteries and it is ready for use..
  • Power Supply: 2X 1.5V AAA Alkaline Battery.
  • Only works with model in photo, will not work with other Nakamichi soundbars..
Check Stock

NTQinParts Replacement Remote Control Controller for Nakamichi Shockwafe Pro 7.1.4, Shockwafe Elite 7.2.4, Shockwafe Ultra 9.2.4 Sound Bar (2022)

  • Replaced Remote Control For Nakamichi Shockwafe Pro 7.1.4, Shockwafe Elite 7.2.4, Shockwafe Ultra 9.2.4 Sound Bar (2022).
  • No programming is required. Just install new alkaline batteries and it is ready for use..
  • Power Supply: 2X 1.5V AAA Alkaline Battery.
  • Only works with model in photo, will not work with other Nakamichi soundbars..
Check Stock

Nakamichi NSM8517 8 in. 400 Watt Peak Mid Range Speakers

  • NAKAMICHI NBF618S-II SPECIFICATIONS : N-Power: 100W | Peak Power: 650W | Distortion (THD): ＜0.2% | Signal To Noise Ratio: ＞90dB | Frequency Response: 20Hz-150Hz | Input Sensitivity, High Level: 0.5V | Input Sensitivity, Low Level: 110mV | Low Pass Filter: 50Hz-180Hz | Bass Boost: 0 to -12dB | Fuse Rating: 20A（Fixed） | Subwoofer: 6×9”, 2 ohm | Unit Dimension: 290x210x73mm.
  • Featuring 100 watts of RMS power driving a 6x8 inch woofer.
  • At just 72mm in height, the NBF618S can easily fit beneath most seats, including the newer electrical seats that come with most vehicles nowadays, ensuring easy compatibility..
  • Compatible with both high and low level inputs for both factory supplied units or aftermarket units. Add on a Nakamichi DSP for even more tuning possibilities..
Check Stock

Nakamichi Excel Series 24k Gold Plated Banana Plug 8 AWG - 16 AWG Gauge Size 4mm for Speakers Amplifier Hi-Fi AV Receiver Stereo Home Theatre Radio Audio Wire Cable Screw Connector 4 Pcs (2-Pairs)

  • ✅ Nakamichi Corporation Ltd. founded in 1948 by Mr. Etsuro Nakamichi, is a Japanese consumer electronics brand that originated in Japan and gained popularity from 1970s onwards from producing high quality audio cassette decks to design-oriented home cinema audio systems, speakers, hi-fi systems, sound bars and automotive stereo products..
  • ✅ Nakamichi banana plugs fit directly into your audio component binding posts seamlessly, saving you the hassle of screwing in or unscrewing speaker wire – especially when space is tight..
  • ✅ This set of Excel Series – 24k Gold plated banana plug uses direct gold-plating technology so it does not tarnish or corrode over time. The entire core from the bottom up to the tip is made of copper for better sound optimisation..
  • ✅ The gold colour looks dull because there is no underlying layer of shiny, distortion-causing nickel. So, all you get is clean and pristine audio quality to your speakers. With the colour coded sleeve, it helps identifying speaker wire’s polarity in order for your speakers to produce the truest audio frequencies and sound wave from the source..
  • ✅ Dual 2-set screws design will ensure the banana plug stays securely connected to the speaker wires. You may secure both set screws to the bare s....
Check Stock

TATTU 500mAh 1S Lipo Battery Pack 3.7V 95C with JST-PHR Plug for Emax Tiny Hawk/Happymodel Snapper7

  • 【Tattu 1S Lipo Battery 500mAh 3.7V 95C 1S1P Lipo Battery Specification】：Battery Voltage：3.7V, Configuration：1S, Capacity：500mAh, Discharge: 95C, Plug: JST-PHR.
  • 【High-Performance Battery】： A Tattu 1S Lipo Battery 500mAh 3.7V 95C 1S1P Lipo Battery Pack with full capacity. Long Cycle Life Offers high power and a very long time for your Multirotor FPV from size 100 to 180..
  • 【Dimensions】: Tattu 1S Lipo Battery 500mAh 3.7V 95C 1S1P Lipo Battery Pack dimensions: 58*18*8mm/2.28*0.71*0.31inch.
  • 【Application】: Tattu 1S Lipo Battery 500mAh 3.7V 95C 1S1P Lipo Battery Pack is suitable for Tiny Hawk (PH2), EMAX Tinyhawk freestyle (PH2), EMAX Tinyhawk S (PH2), Happymodel Snapper7. Multirotor FPV from size 100 to 180..
  • 【What you get】: A Tattu 1S Lipo Battery 500mAh 3.7V 95C 1S1P Lipo Battery Pack With JST-PHR Plug. Please enter "YOUR ORDER" to contact us directly if you have any problems with our product, we will reply you within 24 hours..
Check Stock

Stainless Steel Heat Plate - Fire Magic

  • Stainless Steel Heat Plate - Fire Magic 13.75" x 10.75" in..
  • Fits Fire Magic 12-S1S1N-A, 12-S2S1N-A, 14-S1S1N-A, 14-S2S1N-A, 22-S1S1N-21, 22-S1S1N-62, 22-S1S1N-87, 22-S2S1N-62, 22-S2S1N-87, 24-S1S1N-62.
  • Fits Fire Magic 24-S2S1N-62, 34-S1S1N-A, 34-S2S1N-A, Custom I, Regal I.
Check Stock

17 3/4 X 10 3/4 FireMagic Aftermarket Flavor Grid Deluxe Custom 2 Regal 2 - FMHP4 Replaces OEM 3053-S

  • 17.75 x 10.75 inch stainless steel heat plate.
  • Fits Fire Magic 11-B1C3N-0, 11-B1SNA-A, 11-S1C3N-0, 11-S1SNA-A, 13-S1S1N-A, 13-S2S1N-A, 15-S1S1N-A, 15-S2S1N-A, 17-S2S1N-A, 1B-S2S1N-A, 21-S1C3N-26.
  • Fits Fire Magic 21-S1S1N-26, 21-S1S1N-86, 21-S1S1N-87, 23-S1S1N-62, 23-S2S1N-62, 25-S1S1N-62, 25-S1S1N-71, 25-S2S1N-62, 25-S2S1N-71, 27-S2S1N-31.
Check Stock

Grill Parts Zone Fire Magic 11-B1C3N-0 11-B1SNA-A 11-S1C3N-0 11-S1SNA-A 12-S1S1N-A 12-S2S1N-A 13-S1S1N-A 13-S2S1N-A 2-PK Cast Iron Burner

  • Fits Fire Magic : 11-B1C3N-0, 11-B1SNA-A, 11-S1C3N-0, 11-S1SNA-A, 12-S1S1N-A, 12-S2S1N-A, 13-S1S1N-A, 13-S2S1N-A, 15-S1S1N-A, 15-S2S1N-A, 21-S1C3N-26,....
  • Fits Fire Magic : 25-S1S1N-62, 25-S1S1N-71, 25-S2S1N-62, 25-S2S1N-71, 31-B1S1N-A, 31-S1S1N-A, 3C-B1S1N-A, 3C-S1S1N-A, 61-B0S0N-0, 61-S0S0N-0, Custom....
  • Fits Ironworks : 36 INCH, 60 INCH, OCB-24EB, OCB360 , Replaces # 3041-30-2.
  • Dimensions : 19 x 2 (end that goes over valve), 1 1/2" across burner top , Material : Cast Iron , Compatible Part Numbers : 23201, MCM23201, CIF,....
  • Compatible Part Numbers : 3041-30-2, 3041-40-2, 3041-10.
Check Stock

Allstare WB02X24790 Grate Rubber Feet for GE Stove Parts Gas Stove Rubber Grate Bumpers Stove Replacement Feet GE Range Parts Cooktop Grate Foot 12 Pack

  • ...ase compatible with GE part number WB02X24790, AP5989801, PS11729077, 4455270, EAP11729077 GE gas stove rubber grate bumpers, GE rubber stoppers for stove cooktop. ✅【PACKAGE】8 pack black GE rubber grate foot.
  • ✅【FITS GE RANGE GRATE】 GE stove burner grate foot rubber support bumper fits WB02X24790 C2S900M2N1S5 C2S900P2M1S1 C2S900P3M1D1 C2S900P4M1W2 C2S950M2N1S5 C2S950P2M1S1 C2S950P3M1D1 C2S950P4M1W2 C2S986SEL1SS C2S986SEL2SS C2S995SEL1SS C2S995SEL2SS CGB500P2M1S1 CGB500P3M1D1 CGB550P2M1S1 CGB550P3M1D1 CGP70302N1S1 CGP70362N1S1 CGP95302M1S1 CGP95302M1S2 CGP95303M1S2 CGP9530SL1SS CGP95362M1S1 CGP95362M1S2 and more stove gas range grate rubber feet bumper for GE.
  • ✅【FITS GE RANGE GRATE】 Rubber foot for GE stove parts cooktop protector JB480DM1WW JB480DM2BB JB480DM2WW JGAS640RM1SS JGAS640RM2SS JGB450DEF3BB JGB450DEF3WW JGB450DEK1WW JGB450DEK3WW JGB450DEK4WW JGB450REF4SS JGB450REK1SS JGB620DEF3BB JGB620DEF3WW JGB620GEF3SA JGB620REF4SS JGB630DEF3BB JGB630DEF3CC JGB630DEF3WW JGB630REF4SS JGB635DEK1BB JGB635DEK1CC JGB635DEK1WW JGB635DEK2BB JGB635DEK2CC JGB635DEK2WW JGB635DEK3BB JGB635DEK3CC JGB635DEK3WW JGB635DEK4BB JGB635DEK4WW and more.
  • ✅【GE GRATE FOOT SPECIFICATIONS】The GE burner grate feet is a black rubber part which attaches underneat....
Check Stock