Reviews Nakamichi Shockwafe Pro 1

Nakamichi Shockwafe 7.1 7.2 9.2 DTS:X/Atmos/SSE Soundbar Remote (Does not Work w Other Models)

  • Remote control for Nakamichi Shockwafe 7.1, 7.2, 9.2 DTS:X/Dolby Atmos SSE Soundbars.
  • Will not work with Nakamichi Shockwafe Pro 7.1Ch 400W 45" Sound Bar with 8" Subwoofer (Wireless) and Rear Satellite Speakers or ANY OTHER Nakamichi soundbars systems, only the DTSX and SSE and Atmos series.
Check Stock

Replacement Remote Control Controller for Nakamichi Shockwafe Ultra 9.2.4 Channel 1000W Soundbar

  • Replaced Remote Control For Nakamichi Shockwafe Ultra 9.2.4 Channel 1000W Soundbar.
  • No programming is required. Just install new alkaline batteries and it is ready for use..
  • Power Supply: 2X 1.5V AAA Alkaline Battery.
  • ONLY WORKS WITH NAKAMICHI SHOCKWAFE 7.1, 7.2 and 9.2 DTSX/DOLBY ATMOS/SSE soundbar systems. WILL NOT WORK WITH OTHER NAKAMICHI SOUNDBARS..
Check Stock

Replacement Remote Control Controller for Nakamichi Shockwafe Elite 7.2.4 Channel 800W Soundbar

  • Replaced Remote Control For Nakamichi Shockwafe Elite 7.2.4 Channel 800W Soundbar.
  • No programming is required. Just install new alkaline batteries and it is ready for use..
  • Power Supply: 2X 1.5V AAA Alkaline Battery.
  • ONLY WORKS WITH NAKAMICHI SHOCKWAFE 7.1, 7.2 and 9.2 DTSX/DOLBY ATMOS/SSE soundbar systems. WILL NOT WORK WITH OTHER NAKAMICHI SOUNDBARS..
Check Stock

Replacement Remote Control Controller for Nakamichi Shockwafe Pro 7.1.4 Channel 600W Soundbar

  • Replaced Remote Control For Nakamichi Shockwafe Pro 7.1.4 Channel 600W Soundbar.
  • No programming is required. Just install new alkaline batteries and it is ready for use..
  • Power Supply: 2X 1.5V AAA Alkaline Battery.
Check Stock

Replacement Sound Bar Remote Control Controller for Nakamichi Shockwafe Ultra 9.2.4 Channel 1000W Soundbar

  • Work with Nakamichi Shockwafe Ultra 9.2.4 Channel 1000W Soundbar.
  • No programming or paring is needed. Just insert new batteries to get it work..
  • Will not work with Pro 7.1 2016 soundbar.
Check Stock

6-1-2 Inch 200 Watt 2-Way Component Speakers

  • NAKAMICHI NSM8517 || SPECIFICATIONS || Type : Mid Range Speakers (*) Size : 8'' (20.3cm) (*) Peak Power : 400W (*) N-Power : 60W (*).
  • Frequency Response : 85-12k Hz (*) Sensitivity (dB/W/m) : 93±3dB (*) Impedance : 4Ω (*) Mounting Depth : ＞3.3" （84mm) (*).
  • Voice Coil : KSVΦ30.5mm Magnet Mass : 21.6 Oz (613g) (*) Net Weight(1pr) : Approx. 2.7kg.
  • Nakamichi NSM8517 8 in. 400 Watt Peak Mid Range Speakers The Nakamichi mobile audio department was created as part of an ongoing tradition to provide the same quality and performance from their home audio range into the mobile audio industry..
  • Established since 2004, our small team has since grown Nakamichi from a small player in the mobile audio industry to a medium sized company with a full range of products..
Check Stock

Replacement Remote Control Controller for Nakamichi NK6 Soundbar

  • Replaced Remote Control For Nakamichi Sound Bar NK6 Soundbar Speaker System.
  • No programming is required. Just install new alkaline batteries and it is ready for use..
  • Power Supply: 2X 1.5V AAA Alkaline Battery.
  • Only works with model in photo, will not work with other Nakamichi soundbars..
Check Stock

4 Pcs Braided Wire Speaker Banana Plugs Audio Jack Connector for Speaker Cable 2 Pcs Black and 2 Pcs Red

  • PACKAGE INCLUDED: 4 pcs total (2 black + 2 red)..
  • HIGH QUALITY: 24 k gold plated Nakamichi banana plug. Gold plated connectors ensure perfect signal and quality sound..
  • EAST TO USE: These Nakamichi braided wire speaker banana plugs audio jack connector for speaker cables spade plugs make speaker wire installation....
  • SECURE CONNECTION: Not only do spade plugs make it easier to plug in bare wires, it's also safer this way with no chance of wires crossing creating a....
  • COMPATIBILITY: Accepts wire size up to 4mm. Accepts 8AWG to 20AWG speaker wire.Double screws locking, no soldering. These Nakamichi banana plugs are....
Check Stock

Nakamichi NSM8517 8 in. 400 Watt Peak Mid Range Speakers

  • NAKAMICHI NBF618S-II SPECIFICATIONS : N-Power: 100W | Peak Power: 650W | Distortion (THD): ＜0.2% | Signal To Noise Ratio: ＞90dB | Frequency Response: 20Hz-150Hz | Input Sensitivity, High Level: 0.5V | Input Sensitivity, Low Level: 110mV | Low Pass Filter: 50Hz-180Hz | Bass Boost: 0 to -12dB | Fuse Rating: 20A（Fixed） | Subwoofer: 6×9”, 2 ohm | Unit Dimension: 290x210x73mm.
  • Featuring 100 watts of RMS power driving a 6x8 inch woofer.
  • At just 72mm in height, the NBF618S can easily fit beneath most seats, including the newer electrical seats that come with most vehicles nowadays, ensuring easy compatibility..
  • Compatible with both high and low level inputs for both factory supplied units or aftermarket units. Add on a Nakamichi DSP for even more tuning possibilities..
Check Stock

Nakamichi Excel Series 24k Gold Plated Banana Plug 8 AWG - 16 AWG Gauge Size 4mm for Speakers Amplifier Hi-Fi AV Receiver Stereo Home Theatre Radio Audio Wire Cable Screw Connector 4 Pcs (2-Pairs)

  • ✅ Nakamichi Corporation Ltd. founded in 1948 by Mr. Etsuro Nakamichi, is a Japanese consumer electronics brand that originated in Japan and gained popularity from 1970s onwards from producing high quality audio cassette decks to design-oriented home cinema audio systems, speakers, hi-fi systems, sound bars and automotive stereo products..
  • ✅ Nakamichi banana plugs fit directly into your audio component binding posts seamlessly, saving you the hassle of screwing in or unscrewing speaker wire – especially when space is tight..
  • ✅ This set of Excel Series – 24k Gold plated banana plug uses direct gold-plating technology so it does not tarnish or corrode over time. The entire core from the bottom up to the tip is made of copper for better sound optimisation..
  • ✅ The gold colour looks dull because there is no underlying layer of shiny, distortion-causing nickel. So, all you get is clean and pristine audio quality to your speakers. With the colour coded sleeve, it helps identifying speaker wire’s polarity in order for your speakers to produce the truest audio frequencies and sound wave from the source..
  • ✅ Dual 2-set screws design will ensure the banana plug stays securely connected to the speaker wires. You may secure both set screws to the bare s....
Check Stock

Sound Bar Wall Mount Bracket for Samsung HW-T450 HW-Q60T HW-R450, Sony HT-S350 S200F, JBL Bar 5.1 3.1 2.1, Vizio SB3821-C6 SB2920-C6, Polk Audio, TCL, LG Soundbar Mounting Bracket Kit ( Black )

  • ✅ Universal Wall Fixing Bracket Kit for Samsung / Sony / JBL / Vizio / LG / Polk Audio / Klipsch / TCL / Insignia / Panasonic / Philips / Hisense Soundbar ( Wall Mount Bracket with Sticker and Mounting Hardware Kit )..
  • ✅ Onn Soundbar Mount Compatible With Samsung HW-T450 HW-T430 HW-T530 HW-T510 HW-S60T HW-Q60T HW-Q70T HW-Q950T HW-Q800T HW-R450 HW-N300 etc. / Polk Audio Signa S2 Ultra, MagniFi Max SR, AM9640, Signature S35,Shockwafe Pro 7.1 SSE,YAS-209BL etc..
  • ✅Soundbar Mounting Bracket Kit Compatible With Sony HT-S350 HTX8500 HTS100F HT-G700 S200F Z9F / JBL Bar 5.1 Bar 2.0 Bar 3.1 Bar 2.1 etc. / TCL Alto 7+ TS7010, Alto 7 TS7000, Alto 5 TS5000, Alto 5+ TS5010 etc. / Bose Soundbar 700, Soundbar 500, SoundTouch 300..
  • ✅ Metal Soundbar Speaker Wall Mount for Vizio SB3621ns-H8, SB3651ns-H6, SB3821-C6, M21d-H8R, SB2920-C6, SB3651ns-H6, SB362An-F6B, SB2020n-G6, SB2021n-H6, SB3651-E6, SB3621N-E8, SB3621n-G8 etc. / LG SL5Y SN5Y SN11RG SN9YG SJ2 SL6Y SK5 SK6 SK8 SK4Y SK5Y SK6Y SK7Y SK8Y SK5R SK6F SKM6Y etc..
  • ✅ PACKAGE LIST: 2 x black sound bar wall mounts with sticker, 2 x screw, 2 x metal ring, 2 x wall plug, 1 x wall mount guide, 1 x install instruction. 180 DAYS WARRANTYS.
Check Stock

Nakamichi Shockwafe Elite 7.2.4 Channel Dolby Atmos/DTS:X Soundbar with Dual 8” Subwoofers (Wireless), 2 Rear Surround Speakers, eARC and SSE Max Technology

  • MARCH SALE SPECIAL PRICING NOW ($222 OFF $1299)! Limited qtys, while supplies last. For purchases made at regular price ($1299) in the last 30 days, email Nakamichi directly on Amazon or [email protected] for price adjustment. Do not contact Amazon customer Support as they cannot do price adjustments. MEET THE REINVENTION OF #1 RATED DOLBY ATMOS SOUNDBAR. Get ready for an EMOTION-STIMULATING AUDIO EXPERIENCE with UPGRADED Dual Wireless Subs and Two Surround Speakers (2nd Gen)..
  • SPATIAL SURROUND ELEVATION (SSE) MAX TECHNOLOGY: A state-of-the-art architecture combining new, upgraded custom-matched acoustic hardware and proprietary software to transform your movie, music and gaming content into the MOST IMMERSIVE 360° experience. With precisely-tuned high output amplifiers, extended range twin-cone drivers, silk dome surround effects tweeters and SSE audio processing engines, get the PERFECT CONVERGENCE OF POWER, PROCESSING AND PERFORMANCE to redefine your home theater..
  • ELEVATED DUAL 8” WIRELESS SUBWOOFERS (INDUSTRY-EXCLUSIVE) unlock deep, pressurizing rumbles never felt before, featuring UPGRADED high output amplifiers (up to 450W) and subwoofer drivers that possess immense power, transforming your entire room into a sweet spot filled with MIGHTY....
Check Stock

Replacement Remote for NAKAMICHI NK6 Standard v1

  • Direct Replacement for NAKAMICHI NK6 remote control.
Check Stock