Reviews Multipurpose Fast Bonding Resin

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 205B Fast Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...l oz), 205B Fast Epoxy Hardener (27.5 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: Mix 205 Fast Epoxy Ha....
Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 206A Slow Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...2 fl oz), 206A Slow Epoxy Hardener (7 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: When combined with 105 Resin in a five-part epoxy resin to one-part hardener ratio, this cured resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. The West System 206 Slow Hardener is not intended for clear coating.
  • GENERAL COATING AND BONDING APPLICATIONS: The 105/206 Epoxy Mixture is used for general coating and bonding applications whe....
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 206B Slow Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...l oz), 206B Slow Epoxy Hardener (27.5 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: When combined with 105 Resin in a five-part epoxy resin to one-part hardener ratio, this cured resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. The West System 206 Slow Hardener is not intended for clear coating.
  • GENERAL COATING AND BONDING APPLICATIONS: The 105/206 Epoxy Mixture is used for general coating and bonding applications whe....
Check Stock

BOSCH SDTR122C 25 Pc. 3-3/4 In. 120 Grit Detail Sanding Sheets FOR Wood

  • Triangle sanding sheet design – made for access to hard-to-reach areas at difficult angles.
  • Industrial-strength paper – features high-quality aluminum oxide Grit and resin-bonding agent.
  • Wood-sanding design – ideal for material removal and surface finishing on multipurpose plywood, hardwoods and softwoods.
  • Front-side punching – helps to enhance dust control.
  • Hook-and-loop backing – provides secure paper hold and easy-to-change convenience.
Check Stock

West System 209-SB Extra Slow Hardener

  • 209 EXTRA SLOW HARDENER is a low-viscosity epoxy curing agent. It is useful in a majority of hot-weather bonding situations, and when very long working time and cure time are needed. 209 Extra Slow Hardener produces a slow epoxy cure that develops physical properties gradually at room temperature. It yields a rigid, high-strength moisture-vapor resistant and functionally waterproof solid..
  • USE WITH WEST SYSTEM 105 RESIN for general coating and bonding applications in extremely warm and/or humid conditions, and for extended working time at room temperature. Forms a clear, amber-colored solid with good physical properties and moisture resistance for bonding and coating applications..
  • PROVIDES ABOUT TWICE the working time of 206 Slow Hardener. 209's pot life at 72°F (22°C) is 40 to 50 minutes. Pot life at 95°F (35°C) is 15 to 20 minutes. Cures to a solid state at 72°F (22°C) in 20 to 24 hours. Cure to a solid state at 95°F (35°C) in 6 to 8 hours. Reaches maximum strength at 72°F in 4 to 9 days Minimum recommended working temperature is 70°F (21°C)..
  • PAIR WITH WEST SYSTEM 105-B Epoxy Resin. Blend with with WEST SYSTEM 105 Epoxy Resin at a 3-parts resin to 1-part hardener ratio..
  • EASILY MODIFIED with WEST SYSTEM Fillers, Additives, and Pigments to ....
Check Stock

TotalBoat - 512952 - Polyester Structural Repair Putty - Marine Grade Long Strand Fiber Fiberglass Reinforced Filler for Boat and Automotive Repair Gallon Kit

  • PRE-THICKENED FIBER REINFORCED POLYESTER PUTTY for high-strength structural filling, fitting, bonding, bedding & radius forming.
  • MARINE FILLER has premium polyester resin and long strand glass fibers for strength, impact resistance & elasticity.
  • EASY TO MIX, EASY TO APPLY: For a 100g mass, catalyze with 1% MEKP to get 15-20 min. of working time at 70°F (14 drops of MEKP per ounce of putty).
  • FAST-SETTING STRUCTURAL ADHESIVE is ideal for fiberglass & gelcoat repair.
  • for cosmetic fairing, overcoat Polyester Structural Repair Putty with....
  • AVAILABLE IN QUART AND GALLON KITS: Includes 2 oz. MEKP. This versatile bonding compound can bond dissimilar materials and can also be used in many....
Check Stock

Gemzeez The Original DIY Temporary Tooth Gemz Official Starter Kit TikTok The Kaplan Twins

  • THE ORIGINAL TOOTH GEM KIT: Enjoy the official Gemzeez Starter Kit! Unlike our competitors, we supply enough materials for multiple uses! Gemzeez is....
  • Created with the help of Dentists! Dr. Alan Kaplan DDS, has been practicing Dentistry since 1987. Our Cleansing Gel and UV Bonding Resin is Dental....
  • Fun and easy application! We use genuine Swarovski Crystals to give you your best sparkle! Swarovski crystals are non-toxic and lead free!.
  • Our NEW and IMPROVED 2 Step Cleansing Gel, and UV Bonding Resin formulas ensure Gemzeez will last up to 2 weeks, or even longer! Gemzeez is the most....
  • Kit Includes: 6 Small Clear Swarovski Crystals, 4 Microbrush Applicators, Gemz Picker, Cleansing Gel, Dental Grade UV Bonding Resin, 1 Mini UV Light,....
Check Stock

6-10' DIY Epoxy Concrete Crack Repair Kit-Repair Concrete Basement Wall Cracks

  • Meets ASTM C-881 Standard Specification for Epoxy Resin Base Bonding Systems for Concrete.
  • 12,000 psi Compressive Strength: 8,000 psi Tensile Strength.
Check Stock

DIY Tooth Gem Kit, Teeth Gems Kit with Glue and Light, 20 Pieces Crystals Teeth Jewelry Starter kit, Tooth Jewelry Gems Kit, Teeth Diamonds Jewel Kit

  • Complete DIY kit: The tooth gem kit with curing Light and Glue, including Cotton Rolls, Bonding Resin, Gems, and UV Lights, allowing you to DIY immediately after receiving the package, the most reliable and affordable DIY kit..
  • Simple And Fun Process: The easiest and safest DIY, so that customers who are not good at handwork can quickly get started..
  • Reliable Materials: using the latest resin glue, the most reliable teeth diamonds, ensure tooth gems will last up to 3 weeks, or even longer. The Quality Is Guaranteed, it does not affect daily life, and you can brush your teeth or eat without falling out (because our teeth have different textures, shapes, and sizes, results may vary).
  • Sufficient Materials And Diverse Functions: Provides bonding resin that can bond more than 20 diamonds, high-quality UV LED light can not only cure dental drills but also can be used for nail jewels..
  • Kit includes 1 x Gem Suit, 1 x Gems Picker, 1 x UV Bonding Resin, 1 x UV Light, and 6 x Cotton Rolls..
Check Stock

Epoxy Laminating Resin 2:1 Kit UV Stable, High Strength for Fiberglass and Carbon Fiber. Boats and Surfboards (.75 Gallon Kit- Medium)

  • Advanced resin system with easy 2:1 mix ratio- Fast, Medium and Slow Hardeners.
  • Ideal for high performance and light weight parts.
  • UV resistance reduces yellowing and surface degradation from UV exposure.
  • Great bonding capability, fast wet out, good flexibility, low odor.
Check Stock

3M 02035 9" x 11" P800 Grit Wetordry Sanding Sheets, 50 Sheets

  • Aluminum Oxide abrasive cuts fast and provides a consistent, fine finish.
  • Light, A-weight paper backing offers excellent flexibility in hands on applications.
  • Resin bonding resists deterioration from heat, extending the life of the abrasive cloth.
  • Waterproof material allow for easy debris removal.
Check Stock

LET S RESIN UV Resin Kit with Light Bonding&Curing in Seconds 25g UV Resin Kit with UV Flashlight for Welding Jewelry UV Glue Adhesive for Plastic Repair Glass Light Craft Decor

  • Bonded UV Resin Kit Cured in 5-10 Seconds: LET'S RESIN UV resin for bonding has low viscosity(refer to fluency), strong adhesive, UV curable, odorless&high transparency after curing. Compared with other UV resin, it cures rapidly under the irradiation of a UV flashlight..
  • Perfect Art Adhesive: Compared with traditional glue, LET'S RESIN bonding UV resin kit keeps liquid state before curing with UV flashlight, which is convenient for you to modify and shape. Provide more perfect glue for your artistic creation..
  • Strong UV Resin Adhesive Tool: It can bond small ornaments with transparent objects such as resin, glass, acrylic, etc., and can also be used for welding between glass, metal and plastic. It is recommended that at least one of the two objects should be transparent for better curing..
  • Easy to Use & Carry: Properly install the battery of the UV flashlight, and fix the object while the UV flashlight for irradiation and curing. UV flashlight has high energy and is easy to carry..
  • Why Choose Us: With years of experience in epoxy resin, LET'S RESIN is committed to providing craft enthusiasts with tools and materials to turn imagination into reality. Strictly control product quality and attach great importance to the consumer experience. UV cure ....
Check Stock

3M VHB Tape 4611, 2 in width x 5 yd length, 1 roll

  • ...asures 2 in. (width) x 15 ft. (length). Designed in dark gray, the bonding tape is layered with general-purpose adhesive on both the sides.
  • A high-bonding adhesive, 3M VHB 4611 Tape is specially designed for maintaining a flexible and permanent bonding between different substrates. The two-sided tape is coated with multipurpose adhesive on both sides and made resistant to hot, cold, and cycling temperatures. With an exceptional strength, the double-sided tape provides strong adhesion, eliminating the need for drilling, riveting, or other liquid adhesives. The bonding tape typically adheres to glass and high surface energy bare metal surfaces, such as aluminum, galvanized steel, and stainless steel. The foam-based acrylic adhesive ensures hassle-free assembly, becoming suitable for use in the bonding of the finishing trims and moldings in automobile, heavy-duty vehicle, and equipment industries..
Check Stock