Reviews Mini Red Dot Sight 2
3D Metal Rear Slide Cover Back Plate for Gen 1/2/3/4/5 Glock 9mm/10mm/.40/.45/.357/.380/.22lr Magazine Accessories, Black Skull Red Eyes
- Glock red dot base plate fits for Glock 17 19 22 23 26 27 34 35 37 41. This highly durable,lightweight,low profile.
- This glock red dot mount fits Ade Advanced Optics rd3-001, rd3-02, rd3-009, rd3-006a and Sightmark mini shot reflex sight Fits Vortex Viper/Venom micro red dot sight.
- Fits Burris Fastfire micro red dot sight(Notes: the screws included in the package are not long enough for some Burris red dot sights, you can use the screws in the red dot).
- Replace the rear sight slot with mini red dot base plate. Note: Not fit for RMR, RMS, DOCTOR..
- Attaches firmly to your firearm for sure performance in tactical situations.
Check StockHidden Truth
- Small Red dot adjustment:Steps adjust the mini red dot,①:twist and loosen the two screws above the switch (SET SCREWS)②:if you need to adjust the up and down direction of the front sight, please adjust the screws above the red dot (UP) ③:if you need to adjust the left and right wind direction of the front sight,please adjust the screws to the right of the red dot (R)④:after adjusting the up and down and wind direction, please lock the two screws (SET SCREWS).
- Please note that when adjusting the red dot front sight, the red dot is fixed up and two parallel dots are set as reference points at a distance, (the effect is not obvious at close range)..
- Dimensions: 40 mm (length) x 28 mm (width) x 35 mm (height) PLEASE NOTE THAT this item is fit for most of the tools,NOT ALL. Please see the size whether you need before buy it. If there is any questions, please contact us first..
- This small red dot contains a separate switch with 3 steps for OFF, LOW BRIGHTNESS, HIGH BRIGHTNESS. Scope of application: 30-100m..
- Package includes:1 x 3MOA Red Dot + 1 x Battery Backup + 2 x Hexagonal Screwdriver + 1 x User Manual + 1 x Dust Free Cloth..
Check StockRed Dot Sight Reflex Rifle Optic, 3.25 MOA Mini Rifle Shotgun Red Dot Sight, Mini Rifle Pistol Sights with Rail Mount, Auto On & Off, Waterproof & Shockproof & Fog-Proof Red Dot Sight Airsoft
- ✅[ More Accurate ] The red dot sight is perfect for Glock 19 17 43x 19x 18c. The 3.2 MOA red dot sight is quick to acquire in close quarters while remaining fine enough to promote pin-point accuracy at an extended range.
- easy to zero and holding zero fairly well and faster. and the red dot sight is support adjustable 8-level brightness control. 6-level red dot brightness settings provide optimal visibility in any light conditions. let shooters cater the dot intensity to the situation at hand..
- ✅[ Interactive Sensor System ] This reflex sight was engineered. Gaialoop’s IS system allows your new red dot sights to stand by and feel you anytime. Provides optimum operational safety and extends battery life. Great for walking training/target shooting, home defense, and hunting..
- ✅[ Long Battery Life ] 2 CR2032 Batteries, with a single battery life of up to 4000 hours. With the long battery life span, the red dot makes this the perfect sight to carry on long hunting treks. And the airsoft red dot can automatically power off and wake up to extend your CR2032 battery life with the interactive sensor system.
- ✅[ Easy to Install and Use ] Our red dot scope comes with instructions, easy to install and use. Precision windage and elevation adjustments featur....
Check StockUniqueFire Black 3MOA Tactical Compact Holographic Reflex Mini Micro RMR Red Dot Sight Scope
- Small Red dot adjustment:Steps adjust the mini red dot,①:twist and loosen the two screws above the switch (SET SCREWS)②:if you need to adjust the up and down direction of the front sight, please adjust the screws above the red dot (UP) ③:if you need to adjust the left and right wind direction of the front sight,please adjust the screws to the right of the red dot (R)④:after adjusting the up and down and wind direction, please lock the two screws (SET SCREWS).
- Please note that when adjusting the red dot front sight, the red dot is fixed up and two parallel dots are set as reference points at a distance, (the effect is not obvious at close range)..
- Dimensions: 40 mm (length) x 28 mm (width) x 35 mm (height) PLEASE NOTE THAT this item is fit for most of the tools,NOT ALL. Please see the size whether you need before buy it. If there is any questions, please contact us first..
- This small red dot contains a separate switch with 3 steps for OFF, LOW BRIGHTNESS, HIGH BRIGHTNESS. Scope of application: 30-100m..
- Package includes:1 x 3MOA Red Dot + 1 x Battery Backup + 2 x Hexagonal Screwdriver + 1 x User Manual + 1 x Dust Free Cloth..
Check StockSAWKE Glock Sight Mount Plate - Glock 17 19 22 23 26 27 34 Mounting Plate Mini Red Dot Sight,Glock Mount Plate Red dot Burris Sightmark Vortex
- CAUTION: Not fit for RMR, RMS, DOCTOR and Glock m.o.s. system. NOT fit Glock 19 mos..
- Glock red dot base plate fits Glock 17 19 22 23 26 27 31 34 35..
- This glock red dot mount fits Ade Advanced Optics rd3-001, rd3-02, rd3-009, rd3-006a and Sightmark mini shot reflex sight..
- Fits Vortex/Viper/Venom, Burris Fastfire micro red dot sight..
- Attaches firmly to your pistol for excellent performance in tactical situations Replace the rear sight slot with mini red dot base plate..
Check StockAde Advanced Optics HK USP Tactical Mini Dotx Sight Pistol Mount Base
- Designed for HK USP model to fit Ade rd3-001, rd3-02, rd3-009 and similar style mini Red dot sight such as sight mark mini shot reflex sight.
- Made using the highest quality materials.
- Attaches firmly to your firearm for sure performance in tactical situations.
- Replaces the Picatinny mount packaged with the Red dot sight.
Check StockGlock Sight Mount Plate - Glock 17 19 22 23 26 27 34 35 37 41 Mounting Plate for Mini Red Dot Sight Pistol Handgun Glock Mount Plate Base for Red dot Burris Sightmark Vortex Venom Tactical Hunting
- Glock red dot base plate fits for Glock 17 19 22 23 26 27 34 35 37 41. This highly durable,lightweight,low profile.
- This glock red dot mount fits Ade Advanced Optics rd3-001, rd3-02, rd3-009, rd3-006a and Sightmark mini shot reflex sight Fits Vortex Viper/Venom....
- Fits Burris Fastfire micro red dot sight(Notes: the screws included in the package are not long enough for some Burris red dot sights, you can use the....
- Replace the rear sight slot with mini red dot base plate. Note: Not fit for RMR, RMS, DOCTOR..
- Attaches firmly to your firearm for sure performance in tactical situations.
Check StockVortex Optics Razor HD Spotting Scope 22-48x65 Angled
- Pistol mount plate fits GLOCK 17 19 22 23 26 27 34..
- Fits Vortex Viper/Venom micro red dot sight.
- Fits Ade Advanced Optics rd3-001, rd3-02, rd3-009, rd3-006a, fits Sightmark mini shot reflex sight.
- Fits Burris Fastfire micro red dot sight(Notes: the screws included in the package are not long enough for some Burris red dot sights, you can use the....
- WO WOLTIS,Caution: NOT fit RMR, RMS, Doctor..
Check StockTactical RMR Red Dot Sight, 3.25MOA w/Weaver Picatinny Mount Adjustable Reflex SightPistol Sight, 20mm Rail Mount Pistol Handgun Shunting Red Dot Adjustable-Brightness Scope(Brown)
- 【FULL FIELD OF VIEW】 The 20mm reflector adopts a tubeless design with a wide field of view and can quickly capture the target. Very suitable for shooting from short-range targets to medium-range targets on hunting trips.The sight of the scope is a red dot and has an adjustable function. The bullet will always hit you the location of the red dot..
- 【MULTI-LEVEL BRIGHTNESS】:Enjoy 5 levels of brightness settings that help you achieve pinpoint accuracy even in the brightest or lowest levels of lighting,features adjustable elevation and windage dials,So it has Elevation、Windage adjustment functions to easily adapt to any environment..
- 【Very sturdy and secure rail mounting system】: Waterproof and shockproof, aluminum sturdy construction and mounts promise red dot sight will stand up to extreme conditions.Will not come loose, made to last..
- 【Easy to Install and Adjust】: fully adjust the dot, windage & elevation quickly and change the included battery within seconds.Mini RMR Red Dot Sight Collimator Sight Scope fit 20mm Weaver / Hunting Rifle Sight, intended for use on weapons Mount equipped with Picatinny rails..
- 【Simple 2-button operation and Auto Off】 (+) and (-) buttons are used to power the device up/down and increase/decrease the a....
Check StockVector Optics Sphinx Mini Red Dot Scope Sight Mount Base for Pistol Glock M1911 SIG Sauer P226 Baretta 92 Springfield XD Smith & Wesson M&P HK USP Black Glock
- Designed for GLOCK pistol to fit Vector Optics Sphinx Red Dot Sight or Green Dot Sight, Vortex Venom, Burris FastFire and similar style mini Red dot....
- Lightweight, Shockproof, Weatherproof. Designed for real fire caliber..
- Full metal, heavy duty. Made of high quality 6061 T6 aluminum alloy in durable black matte finish..
- Remove your rear sight before installing the mount base. Including 2 screws, 1 steel bar and 1 plate..
Check StockRD004T TACFIRE Rd004-T 1x30 Ill Red/grn Dot Sight Tan
- TacFire Official Product, 1x30mm Tactical Dual-Illuminated Red/Green Dot Rifle Scope Sight in Dark Earth Tan with Cantilever Weaver Base Mount with Lens Covers and Battery Included..
- Specifications of the Red Dot Sight: Magnification: 1x, Obj. Aperture: 30mm, Field of View: 50 degrees, Eye Relief: Unlimited, Illumination: Red & Green , Reticle Type: Dot, Dot Size: 4 MOA, Material: Lightweight 6061 T6 Aircraft Grade Aluminum.
- Dimensions of Red Dot: Length: 5.25", Width: 2.56"/65mm, Height: 2.75"/70mm, Net Weight: 9.7 oz..
- Included in the package: Dual-Illuminated Red/Green Dot Sight x1, Flip-Up lens covers, Cantilever Weaver Base Mount x1, CR2032 Battery x1, Hex Wrench x1, Cleaning Cloth x1.
- Features of the Red Dot Sight: Durable Cantilever PEPR mount for any 20mm Picatinny or Weaver rail with Quick Attachment Rail Design Allowing Precision Fit, Adjustable Windage and Elevation, Intensity brightness Control Settings Per Color, Fog Proof, Weather Proof, and Shock Resistant, Removable Spring loaded flip-up lens covers..
Check StockDMT Products - Ambidextrous Offset Red Dot Mount
- DMT Products – Ambidextrous Offset Red Dot Mount gives you an added sight option to your existing optic..
- Our “one mount fits most” design ensures that whatever mini red dot you have, you can mount it, Right hand or Left hand!.
- This Product fits the following mini red dot models: (All options shown can be mounted RH or LH of scope) – *Trijicon RMR – Holosun 507C – SIG Romeo1 – Luepold DeltaPoint – *Vortex Viper VRD-6.
Check StockHD104 Reflex Sight Manual Adjustable Rifle Red Green Dot Sight Scope Optic with 4 Tactical Reticle for Hunting (Black)
- GREEN & RED DOT/ 4 RETICLE - This reflex sight is with 4 different reticle types and easy to set red dot or green dot sight, offering a wider shooting sight at dawn, dusk, night and day, everything at a glance!.
- SUPER CLEAR LENS - 1X magnification, reticle pattern 3 MOA dot, adjust the 30mm objective for quick focus and offers a wide field of view, this red green dot sight is with reflective coating and parallax correction to bring you a better hunting experience..
- UNLIMITED EYE RELIEF - Unlimited eye relief for quick target acquisition, you can easily aim at the target even on the move with this red dot sight. The ON/OFF button on the side makes it easy for you to control the illumination color (red/green) and intensity, universal rails system ensure a quick installation on any platform equipped with a weaver or picatnny base..
- EXQUISITE WORKMANSHIP - This reflex sight is made of high quality aluminum alloy material with anodized matte black to offer a superior quality, rustproof, shock resistant, fog-proof, splash-proof, offering a high performance for any kinds of weather..
- WHAT YOU GET - Package includes 2 rails and 3 button batteries. We’re devoted to provide high quality reflex sight for a better shooting experience, your satisfaction is a top pr....
Check Stock