Reviews Mill Drill

Hilangsan 2 Roller Malt Mill Manual Grain Crusher Grain Mill for Wine Brewing Wheat Barley Crusher Stainless Steel Roller Mill with Metal Base Handle Grain Grinder for Electric Drill

  • ...eaving the grain hull intact. The roller gap of hand grain mill can be adjusted between 0.025-0.1 to get the proper grain fineness. The recommended distance is 0.05 inch. Very suitable for grinding wheat, malt, barley, and other wine brewing grains. Not for large grains such as corn and soybeans..
  • Efficient Electric Drill ModeThe malt mill can crush malts with a 3/8 inch electric drill or crank handle. It is recommended to use an electric drill with a low speed of 200-300 rpm, and you can grind perfect grains and increase the efficiency by 85%. The grain crusher is suitable for grinding large quantities of grains. Save time and effort..
  • Stainless Steel Rollers2 rollers of barley crusher are made of stainless steel, heavy duty, and no need to worry about roller rust. The strong rollers can withstand a lot of continuous grinding and repetitive use. Having bearings instead of bushings means it will last for a very long time. The high friction on the roller can crush and peel the grains well..
  • Large Capacity HopperThe hopper of manual grain mill can hold approximately 7 lb of grain. With a large hopper, you can load your grain bill before you start milling. There is no need to frequently add grain to the hopper. The hopper is made of aluminum, which is....
Check Stock

Malted Barley Grain Mill for Homebrew Beer by Brew-Control

  • Includes a 7.7LB Hopper, 2 Stainless 12 TPI knurled Stainless Steel rollers, 4 Ball Bearing, wooden base with locator feet and crank handle..
  • The mill end plates are made from tough 1/2" aluminum plate to prevent the Stainless Steel roller from spreading..
  • Although the mill gap is adjustable, our grain mill is set to the right gap to start crushing grain right out of the box..
  • Our mill ships with a crank handle but it's just as easily to run with a 3/8" or 1/2" battery powered or electric drill - just remove the handle..
  • The sturdy wooden base has three locator feet to securely center on a 5 or 6.5 gallon (11.8-13.8 inch in diameter) brew bucket..
Check Stock

Universal Flexible Flex Shaft Extension Cord Flexible Shaft for Rotary Grinder Tool M8 Keyless Chuck Clamping Dia 3.2mm

  • Made of quality sebific duct material, strong and durable for use.
  • Installing the flexible extension cord on mill is more flexible to use, convenient just like holding a pen.
  • Universal part, as long as your electric grinder tool and electric drill can fit for 3.175mm diameter clamping.
  • Easy to install, just need to clip the connector handle grip to the mill.
  • It is supporting electric grinder or electric drill (The shaft without the machine).
Check Stock

2500g Electric Grain Grinder Commercial Swing Type Dry Mill Machine, Stainless Steel 4000W High Speed Pulverizer for Coffee Spice Grind

  • ✔Function: Barley Crusher Grain Mill is specially designed for grain crushing for beer brewing, helping you to crush grain easily. This is an ideal gift for beer brewers and kitchen lovers..
  • ✔ Easy to use: Malt Crusher for Beer Brewing supports manual shaking, and can also be driven electrically by a wired electric drill. Adjustable rollers at both ends support adjustment between 0-0.065".Comes with screws and wrenches to help you assemble or repair. Cleaning wooden brush helps you clean after use. Suitable for beginners or proficient..
  • ✔High quality: Malt Mill is made of high quality stainless steel metal material. Support multiple reuse..
  • ✔ Including: Grain Mill Homebrew includes 1 malt mill, 4 funnel stainless steel plates, 1 hand crank, 1 brush, 1 bagged screw and 2 rollers. Can help you effectively crush the grain..
  • ✔ Compatible: Barley Crusher Grain Mill is suitable for brewing grains of beer, such as barley, wheat, malt, etc. Does not support large particles such as soybeans, corn, sugar cane, etc..
Check Stock

Yin Yoga: The Foundations of a Quiet Practice

  • [SIZE] – 1mm diameter, 11mm length twist drill bit with 0.7mm shank..
  • [MATERIAL] – Diamond coated high speed steel(HSS) is made by spiral technology, has both toughness and hardness, is not easy to break. The drill bit is sharp, and is easy for chip removal..
  • [APPLICABLE MACHINE] – Widely used in rotary tool such as hand drills, drill press, flex shafts, bench drill and hanging mill..
  • [APPLICATION] – Suitable for drilling small holes on glass, soft metal, sea shells, jade, pearls, drywall and son on..
  • [NOTICE] – When drilling, it is necessary to add cutting fluid in time to lubricate and cool down, which can get a better drilling hole wall, extends the service life and drilling accuracy..
Check Stock

Kegco KM11GM-3R Grain Mill with 11 lb. Hopper and 3 Rollers

  • Barley crusher and grain grinder with 11 lb. Capacity grain hopper.
  • Heavy-duty three-roller mill with adjustable secondary gap-spacing.
  • Mill can be hand-cranked or motorized with a corded electric drill.
Check Stock

Mockmill 100 Stone Grain Mill by Wolfgang Mock

  • ❤ Powerful and Efficient：3000W Supporting power, 2800r / min Rated speed, 110V Rated voltage, 150mm Drill diameter, counterclockwise rotation；The electric corn mill grinder has higher performance than traditional mill. Notice: Due to the 3000w large power, it will make big noise, it maybe not suitable for the kitchen household.
  • ❤ Premium Material：The grain mill uses high quality materials to ensure quality and durability. The capacitor shell is made of corrosion resistant cast iron galvanized material, which will not be crushed easily during transportation and prevent rust；.
  • ❤ Wide Applications: 3000W farm electric mill grinder can grind wheat, rice, corn, sorghum, soybeans, and other crops into dry powder.
  • Suitable for grinding starch, rice flour, corn and other food industries.
  • ❤ Grinding Capacity: Milling: (Corn ≤ 133lbs / h, Rice ≤ 166lbs / h, Wheat ≤166lbs / h, Paddy rice ≤ 110lbs / h).
  • Refining: (Soybeans ≤ 110lbs / h, Rice ≤ 110lbs / h).
  • ❤ AFTER-SALE SERVICE: Lilypelle provides all customers with warranty for the purchase of our Grain Mills. Regardless of the reasons for dissatisfaction with our products, we will provide you with good solutions and the best service. Feel free to contact us through Amazon message, ....
Check Stock

MRbrew Malt Crusher, Stainless Steel Adjustable 2 Bearing Rollers Homebrew Grain Malt Mill Low Speed Electric Drill Available Brewing Beer Wheat Barley Grinder with Wooden Base Manual Crank Handle

  • [Adjustable Roller Gap]--Rollers gap distance is adjustable from 0.025 to 0.1 inches, Adjust the rollers gap according to the density of the grain, Makes grinding malted and unmalted grains a breeze.
  • [Rugged Bearing Rollers]--2 Rollers are 304 Stainless Steel, This mill uses bearings for the 2 rollers, Bearings rollers will last much longer than bushings rollers, Excellent material, You can use this malt crusher for life.
  • [High Capacity&High Efficiency]--Large grain hopper can hold 7LB at one time, is easily under 10 minutes to run all the grain through twice, This crusher Improves work efficiency and saves your time efficiently.
  • [2 Grinding Mode]--Works well with the handle crank and LOW speed electric drill, Freely switch between Manual Crank and Electric Drill Mode, The end of the drive shaft where the handle(or power drill)attaches takes an 8mm hex socket, This stainless grain mill makes your homebrew easier.
  • 100% LIFELONG ISSUES SOLVING FOR YOUEach MRbrew malt crusher is backed by unbeatable, reliable, trusted product quality, we will unconditionally solve your problems if you are not satisfied!.
Check Stock

Mini Mounted Point Set, 50 pcs.

  • The transformer has over current, over voltage, over heat protection.
  • With a drill bit, it becomes a hand drill, with a grinding wheel, it becomes a hand grinder, and with a milling cutter, it becomes a hand mill, very easy to use.
  • Wide application range and flexible to operate.
  • The handheld machine has seven standard grinding tools which is varied.
  • Suitable for processing wood, engineering plastics and soft metals.
Check Stock

Brewland Grain Mill Brewing for Grain Malt Barley, Malt Mill for Homebrew Beer, Grain Crusher Grinder with 7.7LB Hopper 2 Stainless Steel Bearing Rollers and Steel Metal Base, Fit Electric Drill

  • ...s stored inside grains without ruining the husks. Please note it can not be used to crush corns, coffee beans, soybeans, or sugarcanes, and can not mill grains into powder.
  • 2 Grinding Modes - You can either manually mill the grains by the labor-saving long crank handle, or attach your low speed 1/2" or 3/8" electric drill to the end of the drive shaft which has an 8mm hex socket, combining with bearing rollers for easy crushing.
  • 7.7LB Large Capacity Hopper - The hardened hopper can hold up to 7.7LB grains at one time.
  • Solid Steel Base - The sturdy metal base is large enough to fit on any standard 5 or 6.5 gallon bucket ( 11.8-13.8 inch in diameter ). Two M6 screws connect the metal base with the mill body securely.
  • Premium Quality and Exquisite Surface - Brewland grain crusher select 2 high stand 12 TPI knurl stainless steel rollers, anti-corrosion, ensure the long-time use and good flavor of your beer. With a much thicker and stronger mill body structure, no need to worry about the grain grinder deformation. With exquisite hygienic aluminum anodized body and shinning stainless steel rollers, it’s not only a grain mill tool but also a very nice gift for you and your friends.
Check Stock

uxcell 1mm Diamond Twist Drill Bits High Speed Steel for Glass Sea Shells Stone Tiles 10 Pcs

  • [SIZE] - 1mm diameter, 11mm length twist drill bit with 0.7mm shank..
  • [MATERIAL] - Diamond coated high speed steel(HSS) is made by spiral technology, has both toughness and hardness, is not easy to break. The drill bit is sharp, and is easy for chip removal..
  • [APPLICABLE MACHINE] - Widely used in rotary tool such as hand drills, drill press, flex shafts, bench drill and hanging mill..
  • [APPLICATION] - Suitable for drilling small holes on glass, soft metal, sea shells, jade, pearls, drywall and son on..
  • [NOTICE] - When drilling, it is necessary to add cutting fluid in time to lubricate and cool down, which can get a better drilling hole wall, extends the service life and drilling accuracy..
Check Stock

RTFMUCA 01-0390 Throttle Cable Kit for Yamaha Blaster 200 1988-2006 with Carb Cap and Idle Adjuster Screw Removal Eliminator Kit

  • For use on Yamaha Banshee and Blaster models.
  • Used to install a standard Mikuni idle adjuster into the carburetor body.
  • Idle adjuster is necessary if carburetor top has been replaced with a standard Mikuni cap.
  • Kit includes a drill bit (#6), thread tap (6 millimeter x .75 millimeter), 2 idle screws with lock nuts and instructions.
  • Drill press or mill should be used to drill holes in the carburetor bodies.
Check Stock

WEN LA164K 5/8-Inch Keyed Drill Chuck with MT2 Arbor Taper.

  • Holds drill bits, pen mandrel shafts, and workpieces up to 5/8 inch in diameter.
  • Easily open and close the three chuck jaws using the included key.
  • Compatible with any MT2 drill press, lathe, or mill.
  • Installs easily with the simple tap of a rubber mallet.
  • Designed for use with WEN models 3424, 3424T, 3427, 34018, 34027, 34034, 4214, and 4225.
Check Stock