Reviews Drill Point End Mill

Malted Barley Grain Mill for Homebrew Beer by Brew-Control

  • Includes a 7.7LB Hopper, 2 Stainless 12 TPI knurled Stainless Steel rollers, 4 Ball Bearing, wooden base with locator feet and crank handle..
  • The mill end plates are made from tough 1/2" aluminum plate to prevent the Stainless Steel roller from spreading..
  • Although the mill gap is adjustable, our grain mill is set to the right gap to start crushing grain right out of the box..
  • Our mill ships with a crank handle but it's just as easily to run with a 3/8" or 1/2" battery powered or electric drill - just remove the handle..
  • The sturdy wooden base has three locator feet to securely center on a 5 or 6.5 gallon (11.8-13.8 inch in diameter) brew bucket..
Check Stock

YG1 E5G97911 | 1/4x1/4x5/8x2-1/2 AluPwr 3FL HP Carbide Corner Radius End Mill

  • Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds.
  • Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.
Check Stock

AUTOTOOLHOME 3/16' Carbide Square End Mill for Micro Grain Carbide Milling Cutter for Alloy Steel Hardened Steels 4 Flutes HRC50 (1, 3/16 in)

  • AUTOTOOLHOME 600 Nano carbide end mill tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
  • Carbide milling bits Diameter: 3/16'', Shank Diameter: 3/16'', Flute length: 5/8'', Overall Length: 2", 4 Flutes.
  • This 3/16 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications.
  • End Mill router bits are used for side milling, end milling, finish machining, etc..
Check Stock

AUTOTOOLHOME 3/8' Carbide Square End Mill for Micro Grain Carbide Milling Cutter for Alloy Steel Hardened Steels 4 Flutes HRC50 (1, 3/8 in)

  • AUTOTOOLHOME 600 Nano carbide end mill tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • Carbide milling bits Diameter: 3/8'', Shank Diameter: 3/8'', Flute length: 1'', Overall Length: 2-1/2", 4 Flutes.
  • This 1/4 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications.
  • End Mill spiral router bits are used for side milling, end milling, finish machining, etc..
  • Unequal flute spacing and irregular helix flutes ensures stable machining of difficult-to-cut materials and higher efficiency,Vibration absorption provides stability, high efficiency finishing and improved chip disposal.
Check Stock

Niagara Cutter C430R-0.375-D3-R030.0-Z4 C430R Carbide Radius End Mill TiAlN Finish 4 Flutes 3/8 Cutting Diameter 3/8 Shank Diameter 2-1/2 Overall Length 1

  • Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds.
  • Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.
Check Stock

End Mill Bits 5Pcs 6mm Shank Single Flute End Mills Drill Bit Tool Tungsten Carbide CNC Router Milling Bits for Wood Aluminum Steel PCB PVC Circuit Boards Acrylic Carbon Fiber

  • [Specification]: Shank diameter 6mm/0.23".
  • [Single Flute End Mills]: 5 Pcs end mill bits.
  • [ Cutting Edges]: The milling cutter has edges, it can milling holes, s and edges on plates smoothly.
  • [Premium Material]: These drill bits are made of premium tungsten carbide for good milling.
  • [Widely Application]: This carbide end mill is widely used for engraving such as PCB PVC MDF, circuit boards, Acrylic, carbon fiber and other soft materials.
Check Stock

End Mill Bits 10 Pcs 1/8” Shank Single Flute End Mills Drill Bit Tool Tungsten Carbide CNC Router Milling Bits for Wood Aluminum Steel PCB PVC Circuit Boards Acrylic Carbon Fiber

  • [Specification]: Shank diameter 3.175mm 1/8”.
  • [Single Flute End Mills]: 10 Pcs end mill bits.
  • [ Cutting Edges]: The milling cutter has edges, it can milling holes, s and edges on plates smoothly.
  • Offer a smooth cutting surface and chip clearing.
  • [Premium Material]: These drill bits are made of premium tungsten carbide for good milling.
  • [Widely Application]: This carbide end mill is widely used for engraving such as PCB PVC MDF, circuit boards, Acrylic, carbon fiber and other soft materials.
Check Stock

Rowiz 8PCS Brad Point Drill Bits 3-10mm Spiral Twist Wood Drill Bits Set For Soft Hard Veneered And Laminated Wood Mdf Acrylic

  • 1 Set Include 8 Piece(Diameter:3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm).
  • 3-10mm set of brad point drill bits, Wood drill bits, Spiral twist drill mill 8 Piece, straight round shank, Edge sharpness.
  • Suitable for soft wood, hard wood, Beech, Walnut, Elm, Nylon, PU, Acrylic.
  • Optimized spurs insure fast and easy cutting of the wood fibers before the hole is drilled.
  • Beveled edge leads to clean drilling of the diameter without any deviation.
Check Stock

OrangeA Collet Set CAT40 ER32 CAT40 ER16 Spring Steel Collet Chuck Tooling Package for Milling Machine

  • ...sign: High grade spring steel frame ensures better overall balance of tool holder assembly. Durable and long lasting. Polished body to be smooth and rust resistance. 6pcs CAT40 End Mill Holders Size: 1/4", 3/8",1/2", 5/8", 3/4", 1".
  • Both ER32 and ER16 Chuck Gage or projection length is 2.75".
  • 1pcs Precision Keyless Drill Chuck 1/2 Capacity..
  • Great Accuracy & Speed: CAT40 collet chuck accuracy in Tenth. Collet Set: T.I.R.: 0.0003" or 5 um. Hardened and ground to ensure maximum accuracy. High concentricity. 6pcs CAT40 End Mill Holder in Projection Length: 2.5".
  • ER32 and ER16 Chuck Gage or projection length is 2.75". Collet Chuck of high speed is balanced to meet all industrial standard. Stable performance..
  • Multiple Collet Sizes: 12pcs ER32 collets set by 16th: 1/8".
  • 10pcs ER16 collets set: 1/32", 1/16", 3/32", 1/8", 3/16", 7/32", 1/4", 5/16", 11/32", 3/8". Special angled slots increase rigidity. Better overall balance of tool holder assembly. Use with any standard ER collet chucks for coolant-thru tool applications..
  • Effortless To Operate: Precision collet chucks are designed to be easy to use. V-groove or/and Fully ground flange say it is easy on tool changers for less spindle and ....
Check Stock

MRbrew Malt Crusher, Stainless Steel Adjustable 2 Bearing Rollers Homebrew Grain Malt Mill Low Speed Electric Drill Available Brewing Beer Wheat Barley Grinder with Wooden Base Manual Crank Handle

  • [Adjustable Roller Gap]--Rollers gap distance is adjustable from 0.025 to 0.1 inches, Adjust the rollers gap according to the density of the grain, Makes grinding malted and unmalted grains a breeze.
  • [Rugged Bearing Rollers]--2 Rollers are 304 Stainless Steel, This mill uses bearings for the 2 rollers, Bearings rollers will last much longer than bushings rollers, Excellent material, You can use this malt crusher for life.
  • [High Capacity&High Efficiency]--Large grain hopper can hold 7LB at one time, is easily under 10 minutes to run all the grain through twice, This crusher Improves work efficiency and saves your time efficiently.
  • [2 Grinding Mode]--Works well with the handle crank and LOW speed electric drill, Freely switch between Manual Crank and Electric Drill Mode, The end of the drive shaft where the handle(or power drill)attaches takes an 8mm hex socket, This stainless grain mill makes your homebrew easier.
  • 100% LIFELONG ISSUES SOLVING FOR YOUEach MRbrew malt crusher is backed by unbeatable, reliable, trusted product quality, we will unconditionally solve your problems if you are not satisfied!.
Check Stock

SpeTool CNC Router Bits Carving 8 Pcs Set for Wood Detail Profile V Groove Engraving Solid Carbide 1/4 Inch Shank

  • The Carving bits kits of Tapered Ball Nose, Spiral, Cone End Mill Cutter.
  • For CNC,Engraving machine.Carving Wood, plywood, MDF, plastics, acrylic, stainless steel, titanium alloy etc.
  • Long service life, Decreasing the times of changing cutters,Saving production time.
  • Include 3*carbide end mills ( 2 pc v-groove end mill, 1pcs tapered end mill ), 4*Spiral End Mill (3 pc up cut, 1 pc down cut), 1*ball end mill.
  • The Carbide End Mill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
Check Stock

Micro Drill Bits - 10Pcs 0.3mm to 1.2 mm Tungsten Carbide PCB Print Circuit Board Tip Rotary Tool Jewelry CNC Engraving Drill Bits Set for PCB Circuit Board, Dremel PCB Jewelry Making (0.3-1.2mm)

  • PREMIUM MATERIAL - These mini drill bits are made of tungsten steel,carbide tipped drill bits with high hardness,high wear resistance, resistance to bending, anti-impairment.Replacements for your CNC machines and any Handheld tools..
  • MEET YOUR NEED - Cutting edge diameter of these PCB Drill Bit Set: 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.1mm, 1.2mm..
  • SHARP EDGE - End Mill Sets can milling groove and clean surface,a large scraps discharge space,little resistance and smoothly during the scraps discharge.These sets of tool can work quickly and cleanly..
  • IMPROVE ACCURACY - The end milling engraving bits with shape cutting edge,reduce cutting force and prevent drill broken,improve the drilling accuracy.Attention: Don't use on too hard material,like high hardness iron..
  • WIDE APPLICATION - The PCB drill bit sets are great for punching at printed circuit boards,cutting and engraving and worked on Acrylic, PVC, Nylon, Resin, Fiberglass,etc..
Check Stock

End Mill Set Metric CNC Milling Cutter Union Butterfield Tungsten 4 Fultes accupro Carbide Rotary Bits Tool Straight Shank 2-12mm 8pcs

  • ◆2-12mm End Mill Set: This end mill set includes 8 diameter sizes of 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, satisfy your different needs..
  • ◆End Milling Cutter Handle Design：Straight shank handle, rounded chamfer design for easy installation and improved work efficiency..
  • ◆Excellent Carbide End Mill: Carbide end mills provide better rigidity and can be run faster. 4 flutes end mill produce a much finer finish than other flute tools, ideal for peripheral and finish milling..
  • ◆Wide Application CNC End Mill：It can be used on many fields, such as metal processing, CNC machining and engineering using. Large chip flute design for smoother chip removal, making the workpiece smoother and brighter..
  • ◆Package Included：8 x 4 Flutes End Mill Cutter.
Check Stock