Reviews Mill Chuck

Penn State Industries PKGRIND9SS Salt Shaker & Peppermill Grinder Mechanism Combo Kit Starter Package Woodturning Project

  • This is a woodturning project kit. Grinder parts, jam chuck, and forstner bits only. A LATHE IS NEEDED TO 'TURN' INTO FINISHED COMBO SALT SHAKER & PEPPER MILLS. Blanks and all other turning tools and supplies are not included..
  • Includes (3) Salt Shaker & Peppermill Combo Kits in Chrome (PKGRIND9), (1) 1" Jam Chuck (CJAM1), (1) 1-1/2" Forstner Bit (FB150), and (1) 1-1/16" Forstner Bit (FB1-116).
  • Minimum blank size needed to turn is 3" x 3" x 8".
  • Features a ceramic adjustable peppermill grinding mechanism.
  • easy access to refill with both salt and peppercorns.
  • Grind pepper from the bottom and pour salt from the top.
Check Stock

Woohome 574 PCS Sanding Drum and Sleeve Set Spindle Sanding Including 540 PCS Sanding Band Sleeves, 30 PCS Drum Mandrels, Wrench for Dremel Rotary Tool

  • Package include: 540 PCS of rotary sanding bands, 30 PCS rotary sanding drum mandrels, 3 PCS of self-tightening drill chuck, 1 PCS small wrench..
  • 6 Grits rotary sanding bands: 80 grit, 120 grit, 240 grit, 320 grit, 400 grit and 600 grit, 6 grits in 3 size, each size 30PCS..
  • Sanding drum mandrels: diameter is 1/2 inch, 3/8 inch and 1/4 inch, 2 size thickness, each size 5 PCS (size as the picture shows).
  • Easy to use: just need to slide the sanding drums into the drum sander, make sure the drum has been screwed tightly, you can directly start your project..
  • Wide application: Application to electric grinding,handing mill,mind mill polishing grinding the metal and wood, jade, emerald, glass, agate..
Check Stock

WEN LA164K 5/8-Inch Keyed Drill Chuck with MT2 Arbor Taper.

  • Holds drill bits, pen mandrel shafts, and workpieces up to 5/8 inch in diameter.
  • Easily open and close the three chuck jaws using the included key.
  • Compatible with any MT2 drill press, lathe, or mill.
  • Installs easily with the simple tap of a rubber mallet.
  • Designed for use with WEN models 3424, 3424T, 3427, 34018, 34027, 34034, 4214, and 4225.
Check Stock

General Tools 707475 Swiss Pattern Needle File Set 12-Piece Black Set of 12 and Handle

  • 12-piece set of general-purpose needle files.
  • perfect for toolmakers, jewelers, craftspeople and hobbyists.
  • High-quality chromium alloy steel construction with a #2 Single Cut Swiss pattern.
  • 12 file sizes: warding (flat), round, 3-square, square, crossing, oval, half-round, knife, barrette, slitting, joint-round edge and equaling (mill).
  • Ergonomic handle, with contoured fingertip swivel, allows greater pressure to be applied to blade.
  • Precision locking screw chuck holds files securely in place.
Check Stock

LIBAOTML Mini Table Saw for Hobbies - Small Multipurpose Lapidary Rock Saw - Portable Hobby Cutting Machine for DIY Projects - Compact Tabletop Wood Saws for Jewelry Making, Drilling, Crafts

  • ✅ Portable Table Saw: This table saw 3 inch is compact, lightweight, easy to carry everywhere. Declutter your studio bench of bulky woodworking tools and get extra free space for your professional or hobby activities..
  • ✅ Multifunctional Hobby Saw: Our multitool saw allows for versatile use. Assemble the grinding mill or fiber mill to use it as a grinding or polishing machine - or connect it to a flexible shaft or drill chuck for engraving..
  • ✅ Extra-High Power Saw: Boasting a powerful motor that can reach 200W and 10000 RPM, this mini table saw for hobbies helps you finish your projects faster. Control the speed of your mini saw easily through the front dial..
  • ✅ Safe For Your Hands: Unlike standard miter saw, tile saw, or vinyl floor cutter products, our portable workbench saw has fixing holes that secure it on the work surface, preventing slipping, vibration, and cutting accidents..
  • ✅ Powerful Cutting Disc: Featuring high-quality tungsten steel cutting blades, our hobby table saw can cut wooden or acrylic boards, small rock, jade, plastic, aluminum, chrome, or precious metals easily, with great precision..
Check Stock

OEMTOOLS 24413 Dual Foot Air Chuck with Comfort Grip Handle, Tire & Wheel Tools, Semi Tire Inflator, Tire Inflator Chuck Tilt Lock, Long Tire Chuck

  • REFILL CONFIDENTLY: This dual foot air chuck is a heavy duty tire chuck with a lock feature for preventing leaks.
  • The locking air inflator is angled at 30 degrees to take the pain out of filling your hard-to-reach inner tandem or semi-truck tire.
  • BUILT FOR COMFORT: This dual head air chuck is 1 foot long.
  • The operating length of the extended reach chuck provides comfort that a smaller heavy duty air chuck can't.
  • The air chuck’s screwdriver style handle makes air tool use comfortable.
  • ON-THE-GO: Add this tire air chuck to your existing tire tools for heavy duty semi-truck and tractor tires. The 1/4 inch national pipe threads make the dual chuck tire inflator accessible.
  • Heavy duty truck air chuck makes refills quick and easy.
  • NO LEAKS: This dual foot air chuck keeps tire refills leak free.
  • This dual air chuck contains a tilt lock feature perfectly fit for truck tire valves.
  • The 30-degree dual head tire chuck locks to awkward semi-truck or tractor tire stems.
  • SPECIFICATIONS: Tire chuck for air compressor features a 30-degree angled dual head tire inflator.
  • Air chuck features a screwdriver style handle.
Check Stock

HNBun 1/32

  • HIGH QUALITY: Mt2 taper drill chuck made of durable high speed steel, corrosion and rust resistance.
  • drill press chuck compatible with impact drill and different power tool electric drill.
  • DIMENSION: Capacity 1/32" - 5/8", Mt2 Drill Chuck Overall Length: 93mm (3.7). Accuracy: 0.005", Chuck Mount : JT33.
  • PROFESSIONAL TOOL: High quality triple grip drill chuck accepts accessories with 1-16mm shanks, securely holds a wide range of twist drill bits, step drill bits, paddle bits.
  • MULTIFUNCTION: Drill chuck adapter suitable for centering, drilling, tapping, reaming operation. For portable, bench or floor type drill press.
  • WARM TIP: The mt2 drill chuck can NOT be used counterclockwise.
Check Stock

Prolinemax 10' Chuck + 220-480 LBS Welding Positioner Positioning Rotary Turn Table Tilt 0-135 Welder 110V

  • Horizontal Loading Capacity: 480 lbs *Without Chuck Attached*.
  • Vertical Loading Capacity: 220 lbs *Without Chuck Attached*.
  • Center Hole Diameter of The Table: 1-1/8''.
  • Unit Weight: 78 lbs (Positioner) 46 lbs (Chuck).
  • Overall Dimension: 11-3/4''L x 15''W x 22-1/4''H with Chuck Attached *estimate only*.
Check Stock

Mudder 5 Pieces 1/4 Inch Air Chuck Set Including S690 Dual Head Air Chuck, Open Flow Chuck and Closed Flow Straight Tire Chuck with Clip for Tire Inflator Pressure Gauge Supplies

  • Package includes: there are 1 piece of S690 dual head air chuck, 2 pieces of closed flow air chuck and 2 pieces of open flow ball air chuck with clip, 5 pieces in total, can meet your needs of different needs.
  • Dual head air chuck: designed with 1/ 4 inch Female national thread, can compatible with tires on trucks, buses, and other 2-in-1 multi-functional air chucks, functional in checking inflation and pressure, the maximum air pressure is 150 pounds per square inch.
  • Closed flow air chuck: 1/ 4 inch female national thread and rated pressure can be up to 250 pounds per square inch, it enables the shutoff valve to shut down the air flow when the stem is not opened, air only flowed when the chuck is engaged, the straight tire chuck can compatible with valves for most vehicles.
  • Note: when you take the air chuck to measure pressure or inflate a tire, please use the clip to make sure the chuck to the valve stem for sealing.
  • Open flow air chuck: designed to compatible with tire inflator gauges, suitable for most, there is a locking clip which can secure to seal the air chuck into place to a valve stem, so you don't need to make the chuck to valve stems, suitable for trucks, buses, cars, bicycles and motorcycles.
  • Material: our air chuck set is mainly made of bra....
Check Stock

Mophorn K11-200 Lathe Chuck 8 Inch 3-jaw,Lathe Chuck Self Centering Reversible Hardened Steel With Internal and External 2 Set Jaws

  • Premium Steel Structure: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC 58-62. It has high strength and toughness, compression resistance and durability, and long service life..
  • Large Clamping Range: This chuck includes two sets of internal and external jaws. The clamping range of this chuck is between 0.16" / 4 mm - 7.87" / 200 mm, which is suitable for clamping a variety of industrial parts..
  • High-Performance Chuck: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
  • Effortless Operation: The lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient. The chuck has 1" x 8 TPI Thread and 3/4" x 16 TPI Adapter (Mounted on the Chuck).
Check Stock

uxcell Drill Chucks, 1.5-10mm Capacity 3/8-24 UNF Threaded with Chuck Key for Electric Impact Corded Cordless Drill

  • [SIZE] - Clamping Range: 1/16"-3/8"(1.5-10mm), Mounting Thread: 3/8"-24UNF.
  • [CHUCK TYPE] - Keyed Drill Chuck, can be quick and easily replaced drill bits with chuck key(chuck key is included in the package).
  • [3-JAW] - Classic 3 jaws design drill chuck with excellent clamping capability. Quenching hardening and precision grinding to assure good wear-resistant.
  • [APPLICATIONS] - Suitable for drilling equipment such as portable drilling machine, bench drilling machines, milling machines, lathes, etc. It is compatible with many different types of drilling machines.
  • [MAINTENANCE] - Clean up the mechanical waste and foreign matter left in the drill chuck in time after using it. Use the appropriate chuck key for disassembly. Improper installation or disassembly of the drill chuck will increase the accuracy and runout value.
Check Stock

uxcell Drill Chucks, 3/8-24UNF Threaded 1.5-10mm Capacity with Chuck Key for Electric Impact Corded Cordless Drill

  • [SIZE] - Clamping Range: 1/16"-3/8"(1.5-10mm), Mounting Thread: 3/8"-24UNF.
  • [CHUCK TYPE] - Keyed Drill Chuck, can be quick and easily replaced drill bits with chuck key(chuck key is included in the package).
  • [3-JAW] - Classic 3 jaws design drill chuck with excellent clamping capability. Quenching hardening and precision grinding to assure good wear-resistant.
  • [APPLICATIONS] - Suitable for drilling equipment such as portable drilling machine, bench drilling machines, milling machines, lathes, etc. It is compatible with many different types of drilling machines.
  • [MAINTENANCE] - Clean up the mechanical waste and foreign matter left in the drill chuck in time after using it. Use the appropriate chuck key for disassembly. Improper installation or disassembly of the drill chuck will increase the accuracy and runout value.
Check Stock

OrangeA K11-200 Lathe Chuck 8 Inch 3 Jaw,Self Centering Chuck Hardened Steel Jaws,Internal External Grinding for Lathe Drilling Milling Machine

  • Quality Material: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC58-62. It has high strength and toughness, compression resistance and durability, and long service life..
  • High Precision: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
  • Double Jaw Chuck Jaws: Internal jaw is a positive L-shape, and external jaw is an inverted L-shape. The clamping range of this chuck is between 0.16" / 4 mm - 7.87" / 200 mm, which is suitable for clamping a variety of industrial parts..
  • Fast Clamping Speed: The 3 jaw lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • High Adaptability: The accessory screws make the scroll chuck highly adaptable and can be used with the same series of jaws as the chuck. This power lathe chuck is suitable for clamping various parts such as hanging shafts, disks, equilateral triangles, etc..
Check Stock