Reviews Permanent Magnetic Chuck

1 Ton Arbor Press

  • Mathews Engineering 1/2" Arbor Press Magnetic Pin Press Chuck Tool.
  • Key-less 1/2 inch chuck with internal back stop (3/8" version also available).
  • Drill rod starter assortment includes: 3/32"x2.
Check Stock

Festool 576107 Cordless Drill TXS 2.6-Set

  • Compact and Lightweight - Weighing in just under 2 pounds with the Centrotec chuck attached, the TXS will not leave you feeling fatigued even after all day use..
  • Versatile - Featuring the FastFix chuck system, the TXS can be used with the Centrotec chuck, keyless chuck, or the right angle attachment that allows you to access even the tightest spaces..
  • Smart - Equipped with built-in fuel gauge, LED to illuminate the work area, four-bit magnetic storage, removable reversible belt clip, high & low speeds, multiple-position clutch, 10.8 V / 2.6 Ah Lithium Ion batteries, and compatibility with Festool system accessories like Centrotec drill bits, the TXS is a complete stand-alone drill or a great compliment to heavier 18-volt drills. Germany.
Check Stock

Festool 576106 Cordless Drill TXS 2.6-Plus

  • Compact and Lightweight - Weighing in just under 2 pounds with the Centrotec chuck attached, the TXS will not leave you feeling fatigued even after all day use..
  • Versatile - Featuring the FastFix chuck system, the TXS can be used with the Centrotec chuck, keyless chuck, or an optional right angle attachment that allows you to access even the tightest spaces..
  • Smart - Equipped with built-in fuel gauge, LED to illuminate the work area, four-bit magnetic storage, removable reversible belt clip, high & low speeds, multiple-position clutch, 10.8 V / 2.6 Ah Lithium Ion batteries, and compatibility with Festool system accessories like Centrotec drill bits, the TXS is a complete stand-alone drill or a great compliment to heavier 18-volt drills. Germany.
Check Stock

CS Unitec | Heavy Duty 1/2' Drill Chuck w/Weldon Shank Adapter | Mag Drill Adapter Accessory

  • MAG DRILL CHUCK ADAPTER: 3/4" Weldon shank (Industry Standard) to 1/2" Jacobs style adapter.
  • ADJUSTABLE: Jacobs drill press chuck converter can be adjusted for use with up to 1/2" dia. twist drill bits.
  • VERSATILE: For use with magnetic drills and drill presses with 3/4" weldon / 2 Flat tool holder. Also for use on variable speed and reversible drills.
  • HEAVY DUTY: THE IBC 17 weldon chuck accessory is high quality, made In Germany and built to handle the most demanding drilling applications..
  • Includes: (1) 3/4" Weldon Arbor (1) 1/2" drill Jacobs tool holder (1) Chuck key.
Check Stock

HD Chuck HEAVY DUTY 5/8' (16mm) Magnetic Drill Chuck with 3/4' Weldon Shank Adapter by BLUEROCK Tools

  • 5/8" Heavy Duty Chuck for Magnetic Drill Press.
  • 3/4" Weldon Shank adapter (The jacobs taper end press fits into the chuck, opposite end is 3/4" weldon shank).
  • Please confirm your drill is compatible with a 3/4" Weldon Shank.
  • 51mm WIDE x 86mm Long (Jaws Extended) 69mm (Jaws Receded).
Check Stock

Wera - 5051461001 Kraftform 816 RA Bitholding Ratcheting Screwdriver, 1/4\ Head

  • Suitable for hexagon socket insert bits with 1/4" drive..
  • Ratchet fine-tooth design for minimal return angle, switchover ring (right, locked, left).
  • Hexagon chuck with Rapidaptor technology (rapid-in, rapid-out, rapid-spin, chuck-all, single hand function).
  • Kraftform handle with non-roll feature, multi-component.
Check Stock

Devonian Tesla Tester Gauss Meter Surface Magnetic Field Tester

  • Application:Handheld digital WT10A gauss meter used to measure the magnetic field of the permanent magnet material surface, DC motors, speakers, magnetic separator, permanent magnetic separator magnetic field demagnetization and the leakage of the magnetic field, parts machining residual magnetic field..
  • With small size, light weight and convenient carry, this instrument can meet the measurement requirements of various sites. 3，Can be used to measure DC magnetic field and flux density..
  • It has wide measuring range, simple operation and clear display..
  • Can be used to measure DC magnetic field and flux density..
  • Has the function of holding Measure Value/Peak Value, mT or Gs unit of display can be change over. Measuring range of 200mT or 2000mT, and others that as resetting zero by key and so on..
Check Stock

Bielmeier 4V Rechargeable Cordless Electric Screwdriver Kit, USB Rechargeable Lithium ion Battery,Screwdriver Bits, 8 Sockets， LED Work Light, 32 pieces, Flex Hex Shaft, Bit Holders and Storage box

  • ...ve or remove screws easily. Press and hold either the forward or reverse buttons for 2 seconds to power this screwdriver while the front LED work light is on simultaneously. It will turn off automatically after 30 seconds, and the screwdriver will be powered off after 10 minutes when leaving it without use..
  • 【1/4" Magnetic Bit Chuck】The cordless screwdriver has a standard 1/4" (6.35mm) magnetic chuck that accepts all screwdriver bits on the market and the chuck integrated with magnetic, so you don't need to worry about them falling during the work..
  • 【Lithium ion Battery and USB Charge】This cordless screwdriver is built with a rechargeable 1,500mAh Li-ion battery with 500 cycles of charging or discharging. The USB charging cable is convenient to set the screwdriver with either the DC power sources or an AC power supply..
Check Stock

GLTL Gaussmeter Tesla Meter Surface Magnetic Field Tester with N/S Function + Metal Probe

  • ★, Application: Handheld digital WT103 gauss meter used to measure the magnetic field of the permanent magnet material surface, DC motors, speakers, magnetic separator, permanent magnetic separator magnetic field demagnetization and the leakage of the magnetic field, parts machining residual magnetic field. Measuring range: 0 to 200mT milli-Tesla of - 2000mT milli-Tesla.
  • ★, Basic error: ±2percent ±3 word (below 1000mT millitesla of) ±5percent ±3 words (over 1000mT millitesla).
  • ★, Ambient temperature: 5℃~40℃ Relative Humidity: 20%~80% (non-condensing) Power supply: one 9V battery, external power supply (Battery is not included).
  • ★ ,Package Included: 1 x WT103 Gaussmeter Tesla meter.
  • 1 x DC Adapter ( includes AAA*3 Batteries ).
Check Stock

6'' x 12'' Fine Pole Permanent Magnetic Chuck Workholding For Grinding 6x12

  • Can be drilled or machined to a depth equal to thickness of the top plate minus 1/ 16".
  • Top plate is furnace brazed, making a solid, one piece unit.
  • Handle moves easily to turn chuck on or off.
  • Overall dimension: 6''L x 12''W x 1-3/4''.
Check Stock

Essential Rob Halford

  • ...es you the versatility to drill different materials and use a variety of bits. Low speed for screwing and high speed for drilling..
  • ✅ [Household Hand Tools & 14” Pink Storage Bag] - The home tool set comes with many hand tools including slip joint pliers, groove joint pliers, adjustable wrench, long nose pliers, magnetic screwdriver holder, screwdriver bits, utility knife, tape measure, etc. The 14" Pink women's tool bag is great for home improvement and DIY projects..
  • ✅ [3/8” Keyless Chuck] - The 3/8" keyless chuck allows the cordless drill to use a variety of bits for common tasks around the house. With the Forward/Reverse switch you can install/remove the bits by hand tightening or loosening the chuck..
Check Stock

Bielmeier 20V MAX Cordless Drill Set, Power drill kit with Lithium-Ion and charger,3/8 inches Keyless Chuck, Electric Drill with Variable Speed, LED and 29pcs Drill Bits (BCDK-29)…

  • ...ED light illuminates dark working areas. The F/R button can be adjusted to clockwise and counterclockwise rotation. A flexible shaft could be used in some places where driver bits are hard to reach. Variable speed（0-700RPM）with electric brake function to provide precise operation..
  • 【PACKAGE CONTENT】 (1) magnetic flexible shaft for hard-to-reach places, (3) Woodworking drill bits, (3)Twist drill bits, (1) screwdriver bit, (1) 60mm magnetic bit adaptor, (20) driver bits, (1) 1.5Ah battery, (1) Belt Buckle, (1) Charger, (1) User Manual..
Check Stock

Festool 564514 Cordless Drill TXS Li 2.6 Set

  • Fast fix Interchangeable chucks: 3 tools in 1, the cxs can be deployed with a keyless chuck, centrotec chuck, and right-angle attachment.
  • Compact and lightweight: weighing in just under 2 pounds, these drills will not leave you feeling fatigued even after all day use.
  • LED: bright LED lamp increases visibility of the bit and the workpiece for more precise results, even in low-light conditions.
  • Equipped with built-in fuel gauge, LED, magnetic bit storage, Reversible belt clip, high & low speeds, multiple-position clutch.
  • Independent drill and drive mode: switch easily from drilling to fastening without changing the torque setting, with a slip of the lever into independent drill and torque settings.
Check Stock