Reviews Metric Thread Restore Kit

ABN 131-Piece Metric Thread Repair Set – Damaged Helicoil-Type Thread Master Repair Kit for Automotive Repairs

  • [Create Stronger Internal Threads]: The ABN Helicoil Rethreading Tool Kit Metric Stripped Thread Repair Kit is a course threads M5 to M12 restorer 131-piece set made of chrome-vanadium with stainless steel coils to restore damaged threads in steel, cast iron, and aluminum spark plug engine repairs, stripped oil pan drain plugs, and more.
  • [Contents]: Thread restorer kit metric set includes 5 insert installation tools, 5 lug break pin tools, 5 twist drill bits, 1 hex key, 5 thread taps, 110 wire thread inserts, carrying case, and instructions.
  • [Perfect Sizes]: Twist drill bit sizes 5.2mm, 6.3mm, 8.3mm, 10.5mm, 12.5mm.
  • Screw tap and thread insert sizes M5x0.8x6.7mm, M6x1.0x8.0mm, M8x1.25x10.8mm, M10x1.5x13.5mm, M12x1.75x16.3mm (where M12 means thread outer diameter = 12mm, 1.75 means pitch of thread = 1.75mm).
  • [Quick Organization]: Steel carrying case with latch and molded plastic inside tray insert to keep universal thread repair tool pieces separated and easy to access.
  • Includes bottom recesses for organizing the coils in included plastic bags.
  • [Easy to Use]: Remove your damaged thread by using an included twist drill bit.
  • Load the thread insert into installation tool.
Check Stock

Rotary Thread File RTK1, Chase, Restore, Repair, and Clean: Male, Female, Inch, Metric, And Pipe Threads. (3 Piece File Starter Kit)

  • Restore dent, dinged, or damaged threads in nuts and bolts within a minute with the RT1 Rotary Thread File! Restoring threads on the smallest bolts and getting into deep nuts without worrying about getting the right pitch is exactly what you’ll get with the Rotary Thread Starter Kit..
  • Unlike traditional thread repair tools that come in standard sizes, the RT1 and RT2 that comes in this kit is an all-in-one tool that eliminates the need for switching when you’re working with both external and internal threads..
  • The ingenious universal design of our thread file is what makes it stand out from other thread files. All inch, metric and pipe threads have the same 60 degree "V" angle. This allows this tool to quickly work on any project, both internal and external threads..
  • Ideal for restoring Inch, Metric, Pipe, Male, and Female Threads made out of Metals, Hardened Metals, Ceramics, Glass, and Plastics, the RTK1 Starter Kit has become the go-to thread repair tool for both home improvement enthusiasts as well as industry professionals..
  • Our US Patended and Engineered Rotary thread file is great for home projects, industrial, automotive, farm & ranch, and technicians. Purchase with peace of mind with our 24/7 friendly customer service..
Check Stock

Rotary Breather Tube Set Fits B&S 692187 & 692189

  • ✅ Restore dent, dinged, or damaged threads in nuts and bolts within a minute with the RT1 Rotary Thread File! Restoring threads on the smallest bolts and getting into deep nuts without worrying about getting the right pitch is exactly what you’ll get with the RT1..
  • ✅ Unlike traditional thread repair tools that come in standard sizes, the RT1 is an all-in-one tool that eliminates the need for switching when you’re working with both external and internal threads..
  • ✅ The ingenious universal design of our thread file is what makes it stand out from other thread files. All inch, metric and pipe threads have the same 60 degree "V" angle. This allows this tool to quickly work on any project, both internal and external threads..
  • ✅ Ideal for restoring Inch, Metric, Pipe, Male, and Female Threads made out of Metals, Hardened Metals, Ceramics, Glass, and Plastics, the RT1 has become the go-to thread repair tool for both home improvement enthusiasts as well as industry professionals..
  • ✅ Our US Patended and Engineered Rotary thread file is great for home projects, industrial, automotive, farm & ranch, and technicians. Purchase with peace of mind with our 24/7 friendly customer service..
Check Stock

Thread Repair Kit 42Pcs Thread Chaser Set Rethreading Kit in UNC UNF and Metric Size Thread Chaser Kit Thread Restorer Kit 1/4 5/16 3/8 7/16 1/2 9/16 5/8 Pipe Bolt Thread Cleaner Tool Tap & Die Sets

  • 【Well-Made 42PCS Thread Chaser Set】The thread chaser kit has the most common sizes in UNC, UNF, and metric. Cleans internal and external threads. The chart on the cover gives a quick reference guide of which sizes are in this kit. Each set chaser of the three types of threads in this kit is color coded. 42pcs thread repair kit includes 21 dies, 19 taps and 2 thread files..
  • 【21PCS Dies】The hex drive head makes it quick and easy to use with a socket and a speed handle. This hex head is also helpful in tight, hard-to-reach areas. Inch coarse sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8".
  • Inch fine sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8".
  • Metric sizes: 6x1.00, 8x1.25, 10x1.25, 10x1.50, 12x1.25, 12x1.5, 12x1.75mm.
  • 【19PCS Taps】The thread restorer kit is great for cleaning up crusty, rusted and damaged threads. Gold/Black/Silver taps, just different finishes to help you keep things organized. Inch coarse sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16".
  • Inch fine sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16".
  • 【2PCS Thread Files】All parts are made of high quality carbon steel material, highly tempered for strength and durability. SAE size: 9,10, 12, 16, 20, 27....
Check Stock

Nicholson Thread Restoring Hand File, Number 8, Metric Bolt, Thread Teeth, 8-3/8\ Length (Pack of 1) (33016)

  • Thread teeth restore damaged external threads on bolts.
  • Fits metric thread sizes: 0.80, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, and 3.00 mm.
  • Has teeth on both ends for a range of thread sizes.
Check Stock

2 Pack Thread Pitch Gauge, 51 Pcs America SAE Type + 58 Pcs Metric & America SAE Type & British Whitworth, Multi-Purpose Screw Pitch Cutting Gauge Caliper Gages Measuring Tool

  • ★【What You Get】: In this thread pitch gauge kit, it include 51Pcs America SAE type, 52pcs metric and Inch type, 3pcs metric & america SAE type & British Whitworth, they are well packed in a plastic box, easy for carry and store..
  • ★【High Quality】: All the thread pitch gauge are made of stainless steel, heat processed with chrome finish, high strength, good resilience, elegant appearance. Surface polished smooth, applying anti-rust oil to prevent rust..
  • ★【Measuring Range】: 51pcs America SAE type measuring range is 4-84.
  • 58pcs Metric & America SAE Type & British Whitworth Metric is 0.25-6.0mm, Imperial is 4G-62G US: 8, 10, 11, 14, 19, 28..
  • ★【Easy to use】: Designed with a hole on each end, use screw for easy adjust and disassemble, from where you press the tooth gauge, you can easily rotate the thread blades, numbers are stamped clear for read..
  • ★【Wide Application】: They measure accurately and have almost no errors. Typically used to check the mold & machine & mechanical thread size determination is correct.
  • Accurately measures internal and external screw threads with thread blades of varied size.
  • Center Gauge use to grind and position thread cutting tool on a lathe..
Check Stock

Drainzit STAN1438 Oil Change Aid for Briggs & Stratton Tecumseh 3/8' Oil Port

  • Drainzit oil hoses make changing oil easier and cleaner. Drainzit is easy to install, simple to use and requires no engine modification. For use on nearly all equipment powered by small engines: pressure washers, generators, pumps/sprayers, compressors, lawn mowers and more. Fits most briggs and stratton, tecumseh engines with 3/8 in. pipe thread oil drain port, Kohler command and OHC 16 and 18 HP Fittings convert to SAE wrench sizes Efficient - custom made metric fittings seal kit to.
  • Fits most briggs and stratton, tecumseh engines with 3/8 in. pipe thread oil drain port, Kohler command and OHC 16 and 18 HP.
  • Efficient - custom made metric fittings seal kit to engine with O-ring.
  • Rubber retainer loop holds kit in place when not in use.
Check Stock

TOMMARS 49-Piece Thread Chaser Set, UNC UNF & Metric Thread Restorer Tool Master Thread Rethreading Kit

  • Thread chaser set includes: UNC(silver): 5/8”-11, 9/16”-12, 1/2”-13, 7/16”-14, 3/8”-16, 5/16”-18, 1/4”-20.
  • UNF(black): 5/8”-18, 9/16”-18, 1/2”-20, 7/16”-20, 3/8”-24, 5/16”-24, 1/4”-28.
  • Metric(gold): M14*1.5, M12*1.75, M12*1.5, M12*1.25, M11*1.5, M10*1.5, M10*1.25, M10*1.0, M8*1.25, M6*1.0.
  • Special thread repair kit used for chasing worn and damaged threads and cleaning stubborn dirt and corrosion without shaving off metal..
  • A must-have master thread chaser kit for any auto mechanic for chasing threads on rusty fasteners and bolt holes on cylinder heads, engine blocks, and bodies of vehicles..
  • Thread chaser set is made of the highest quality carbon steel materials, with strong strength and maximum durability. The dies and taps pieces are hex shaped to use with a wrench or socket..
  • This master thread chaser set is comes with a storage case to keep everything organized. The taps and dies are color coded for easy identification, which helps you differentiate at a glance between coarse, fine, metric, and SAE chasers and dies..
Check Stock

ABN Professional Thread Repair Kit - 131pc SAE Drill Thread Restorer Kit for Restoring External or Internal Screw Holes

  • [Restore Stripped Screws]: Repair stripped threads with the ABN Thread Repair Tool Set.
  • 131pc long rethreading kit is ideal for repairing 1/4, 5/16, 3/8, 7/16, or 1/2-inch internal or external screw holes.
  • [Use for Any Job]: Fix up your engine or restore automotive wear and tear with the rethreading tool kit.
  • Complete any drilling, tapping, and tang removal jobs with the thread chaser set.
  • [Carry With You Anywhere]: Spark plug thread chaser and bolt hole thread repair kit comes in a steel case to keep all 131 pieces neatly organized and labeled for your convenience.
  • Lightweight 5lb (2.3kg) case is easy to transport between job sites and takes up little room making it easy to store.
  • [Rely on Maximum Strength]: Thread fixer tools are constructed of chrome vanadium steel to withstand repeated use and to help prevent corrosion.
  • Inserts are heat-treated for long-lasting strength.
  • [Package Details]: Bolt thread cleaner tool standard thread repair kit includes 5 twist drills, 5 screw taps, 5 installation tools, 5 breaking pin tools, 111 thread inserts, and a carrying case.
Check Stock

ATPEAM Metric Thread Repair Tool Kit | 131PCS HSS Drill Bits Taps Threaded Inserts Installation Tool and Helicoil Thread Repair Kit for Repairing M5 M6 M8 M10 M12 External and Internal Screw Holes

  • A Complete Thread Repair Set: This 131 pieces thread repair tool kit by ATPEAM includes bits, taps, and inserts in the 5 most needed Metric sizes: M5, M6, M8, M10, and M12..
  • Extra Long Last: The metric thread repair tool kit is constructed from high-speed steel for superior handling while the inserts are heated-treated 45# steel for greater strength and longevity in place..
  • Easy to Use: The thread repair kit is packed in a storage case, the convenient carrying case holds and organizes all the parts for easy transport and storage between jobs.
  • on the site, the drill bits quickly create room for the installation tools to smoothly fit the inserts that repair your old threading.
  • the breakoff tools clean things up for use..
  • Wide Application: Our HSS drill helicoil repair kit is ideal for restoring stripped or damaged internal or external threads as well as for performing maintenance work to protect any threads from wear and tear..
Check Stock

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • CUT & RENEW THREADS: The ABN | Metric Tap and Dies Set 110-Piece Metal Threading Kit cuts and renews external and internal threads to exact standards.
  • Ideal for professional machinists and DIY weekend warriors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material.
  • Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading.
  • FITS YOUR APPLICATION: Metric – Taper taps (2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carb....
Check Stock

TAILUG Thread Repair Kit 261-Piece HSS Drill Helicoil Repair Kit SAE & Metric 1/4 5/16 3/8 7/16 1/2 M5 M6 M8 M10 M12 with HSS Drill Threaded Inserts Screw Tap Installation and Tang Break Tool

  • 【WIDELY USED】: Our drill and tap set creates a stronger internal thread in soft metals and protects tapped threads against wear and damage. It is suitable for repair stripped or damaged internal threads and widely used in automotive and plumbing applications..
  • 【SAE & METRIC】: Standard 261pcs thread repair kit, includes HSS drill bits, wire thread inserts, STI taps, installation and tang break tools. 1/4", 5/16", 3/8", 7/16", 1/2", M5, M6, M8, M10, M12 of SAE and metric sizes get you fully equipped..
  • 【EXCELLENT MATERIAL】: The helicoil kit is made of high-speed steel, with better hardness and toughness after heat treatment. Chrome finish surface is for anti-rust. The thread inserts made of heat-treated 45# steel has better toughness and is not easy to wear and deformation. Extended service life..
  • 【HIGH PRECISION】: 135° apex angle of twist drills, with stronger metal penetration and higher efficiency. HSS screw taps have precise screw threads, offer large chip space and small resistance during cutting. Workmanship meets and exceeds ANSI standards..
  • 【PORTABLE & GUARANTEE】: Everything you’ll need for thread repairing is supplied in a durable carry case, ensuring safe storage and protection when not in use. Sizes and quantities a....
Check Stock

Rotary 14907 PK3 Mower Blades

  • ✅ RT1 = .375 inch Dia., RT2 = .75 inch Dia., RT2L = .75inch Dia., RT4 = 40mm, RT5 = 50mm..
  • ✅ Restore dent, dinged, or damaged threads in nuts and bolts within a minute with the RT2 Rotary Thread File! Restoring threads on the smallest bolts and getting into deep nuts without worrying about getting the right pitch is exactly what you’ll get with the RT2..
  • ✅ The ingenious universal design of our thread file is what makes it stand out from other thread files. All inch, metric and pipe threads have the same 60 degree "V" angle. This allows this tool to quickly work on any project, both internal and external threads..
  • ✅ The gland files are specifically designed for hydraulic cylinder glands and resurfacing seal areas.
  • restores snap ring grooves, keyways, grooves, glands, and square threads inside and outside.
  • ✅ SATISFACTION GUARANTEED: We at Rotary Thread stand behind our products and invest in product quality. Our US-based friendly customer service team is here for you and happy to help answer any questions you may have.
Check Stock