Reviews Thread Lock Kit

1/2\ Stainless Steel Wire Rope Clips (Box of 10)

  • Kit contents:5parts,Sealing nut,Seal,Body,Washer,Lock Nut.
  • Gland thread:PG11 IP rating:IP68 Body material:polyamide (PA66) Body colour: Black.
  • Cable Range:5.0-10.0mm/0.2″-0.4″ Thread length : 11mm Kind of thread:PG.
  • Flammability rating:UL94V-2 Seal material:chloroprene Length:36mm.
  • EASY APPLICATION - Cable can be inserted through directly then tighten easily. No need for disassembly..
Check Stock

Atima Generator Accessories – Extended Run Dual Fuel System Extender Kit for Honda Generator

  • ...ge]:1: Run honda generator fuel extender System Each fuel pipe interface is a quick interface, so it is very convenient to connect .2: When using our products, the generator ,fuel tank and leather pipe are directly connected, not twisted, reducing the distortion of the leather tube and increasing the service life..
  • [Thread fit] :The fuel tank cap thread is tightly coupled with the generator thread, and the rubber gasket is squeezed with the generator port to form a seal to prevent air from entering..
  • [Tips]：The users should buy another tank with Thread outlet to connect this system , like attwood 8806LPG2S Epa Certified Portable Fuel Tank.The model number of the generator must match the model of the fuel cap.In use, as for the users except Honda generator users, the tank should be placed at a higher position than the generator, using gravity to transport oil.Carefully rotate the fuel tank cap on the generator to prevent damage to the plastic thread on the fuel tank..
Check Stock

08-0045 Idle Screw Adjuster Kit for Yamaha YFS200 Blaster YFZ350 Banshee 1987-2006

  • Fitment - 08-0045, Idle screw kit for Yamaha 1988-2006 YFS200 Blaster.
  • Fitment - 08-0045, Idle adjuster kit for Yamaha 1987-2006 YFZ350 Banshee.
  • Kit Includes - a drill bit (#6), thread tap (6 millimeter x .75 millimeter), 2 idle screws with lock nuts.
  • Please Note - Installing this kit requires drilling and tapping the carburetor body.
  • Service - We offer idle screw adjuster tool 12 month service, any questions about idle screw adjuster tool, please contact us by email, we will reply....
Check Stock

Hood Pin Plate Lock, Stainless Steel Engine Hood Pin Plate Bonnet Lock Clip Kit Car Modified Accessory

  • High Quality: The hood pin plate lock is made of high quality stainless steel, which is abrasion resistant and crack resistant. Open the hood quickly to meet your needs..
  • Improve Safety: Hood pin plate lock kit will protect your engine compartment and improve your driving safety. Protect your engine compartment and add a positive lock to your car's hood to make the hood tight and secure..
  • Dimensions: the length of the bottom threaded pin is about 4 inches and the thread is 2 1 / 2 inches. A 24 inch competitive lanyard with safety pins is also included..
  • Add Decoration: Suitable for carbon fiber glass cover, hood pin lock will increase the safety and decoration of the cover. Do not lift the hood of the vehicle during high-speed racing or accidents..
  • Easy to Install: Stainless steel scratch resistant panel and long lanyard make super kit easy to install. A drill bit is required for installation to prevent engine vibration while driving or turning..
Check Stock

Sewing Kit 126 Pcs Premium Sewing Supplies Kit with Needle and Thread Accessories Portable Sewing Kit for Adults, Beginner, Traveler, DIY and Home Repairs

  • 【126 Pcs PREMIUM SEWING KIT】- All sewing suppliers are comes in a simple and elegant PU case. that contains30 different colors thread (each color has a length of 120 yards). There are assorted sewing needles, stainless steel scissors, safety pins, a measuring tape, a metal thimble, a needle threader and more..
  • 【30 XL SEWING THREAD】 - All the sewing accessories are made of premium materials. The sewing thread made with high-quality durable polyester, it will not be fraying easily, and the plastic reel also is not easy to deformation. The beautiful vibrant colors are ideal for your daily needs..
  • 【PORTABLE SEWING ACCESSORIES】- This sewing kit weights only 0.84lb, offer a compact case(9*8*1.2 in), with a secure-lock zipper, all the sewing accessories are compact and organized without loosing down. This perfect size can easily put into your backpack, suitcase, briefcase, office table drawer, car ect..
  • 【A PERFECT GIFT】- Our portable sewing kit is a wonderful gift for Mother's Day, Christmas stocking stuffers, school projects, traveler, backpacker, begin a craft project or DIY toys. It also a good beginning sewing kit for your kids or who want to learn sewing..
  • 【100% SATISFACTION GUARANTEED】- Customer satisfaction is our utmost priority, and....
Check Stock

Sewing Kit, Wooden Sewing Basket with Accessories, Sewing Box with Sewing Kit Accessories for Home Repair Tool Set for Beginners/Women/Men/Girls/Kids

  • 【All-in-one Sewing Kit】All the accessories are made of high-quality materials, the wooden sewing box included: a scissor, sewing thread in 24 colors, 1 extra white and 1 black thick thread, assortment of sewing needles, seam ripper, buttons, needle threader tools, thimble, measuring tape, thread clippers, and a wood Block..
  • 【Portable Wooden Sewing Box】Much durable than leather or plastic box. This mini wooden box portable, and it can secure-lock elastic straps to keep everything organized at all times, their ideal size can slip into a purse, suitcase, briefcase, office desk drawer, car, gym locker, or RV..
  • 【Easy to Use】 The kit has a scissor that can easily cut through a lightweight muslin to even a thicker cloth, a needle that can stitch on a variety of clothes and a seam ripper that makes picking out stitches incredibly simple..
  • 【Professional Sewing Accessories】A sewing kit which contains only the most essential and best sewing notions (sewing tools) and that too in an easy to organize kit. Being a pro at quick fixes like replacing the button, repairing the seam of your shirt or mending the ripped hemline was never easier..
  • 【Stylish Design】The size of the sewing box is 8.58 x 5.31 x 3.54 inches. All comes in a Designer Gift Box read....
Check Stock

Stainless Steel keg Coupler Ball Lock Posts Adapter,Sankey keg to Ball Lock Quick Disconnect post,Fits to D Type Keg Coupler FPT 5/8 Thread Stainless Steel Gas & Liquid Post for Homebew

  • 【Food Grade Material】Made of food grade 304 stainless steel instead of chrome plated , which let our keg coupler adapter kit more healthier/ environmental/anti-corrosion/no rust/durable. 2pcs Silicone gaskets are for free..
  • 【Two Way to Identify Gas &Liquid Post】 The Gas Post has a subtle etched line around the top of the base (the liquid post has no etched line).The flaring of the metal on the liquid side is much wider than the gas side.
  • 【Quick & Easy To Convert】This Keg Coupler Adapter can combined with ball lock quick disconnect set that will convert the sanke style keg into a Cornelius style Ball Lock keg( easy to toggle between commercial and homebrew beers).
  • 【Hand Or Plier To Install】Can install our ball lock keg conversion kit in 5/8 thread S-style &D-style keg coupler to use.You can use hand or the plier to lock each side grooves,then tighten the posts. Don’t over tighten to avoid deforming the washer.
  • 【Easy To Clean 】To clean this keg coupler adapter kit , you can infuse the clear water into your beer keg to operate one time just like exporting beer.Don’t suggest you take apart this conversion kit,cuz it is very difficult to reinstallation.
Check Stock

McGard 24548 Black Cone Seat Wheel Locks(1/2\-20 Thread Size) - Set of 5

  • For use with steel or aluminum wheels with lug nuts that utilize a 60 degree tapered cone seat at the bottom. Kit includes Wheel locks, unique key tool and ID card.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards..
  • Please note that wheel lock sets are application-specific products. You must confirm proper fitment for your vehicle by using the Amazon part finder or consulting our website. Please review important fitment notes provided. Also note the type of seating your wheel locks require they can be either radius, flat or cone seat this has to be done visually by the customer to insure a proper fit before purchase and install along with correct shank length and thread size that matches your current lug nuts.
  • Due to the unique key patterns, the pattern shown in images will differ from the pattern on the locks you receive. If ordering multiple lock sets, the keys will not match. McGard keys will not match OEM locks installed by ....
Check Stock

10 Pcs Wire Insert Thread 304 Stainless Steel Wire Screw Sleeve Inserts Thread Repair Kit M8x1.25x3D

  • ...fers good corrosion resistance, they also have superior rust resistance and the excellent of oxidation resistance. High hardness for long time service, the hardness of the wire screw is higher than the screw, so it has little wear and tear in connection with screw,and can be used repeatedly.
  • 【ELASTIC DESIGN】Deep thread, not easy to slick, because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to fatigue strength.
  • 【ANTI-LOOSE】The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device, used for frequent disassembly, it can greatly improve the life of thread.
  • 【7 SiZE ASSORTED HELICOIL KIT】The kit contains 7 kinds of size: M3(10pcs), M4(10pcs), M5(10pcs), M6(10pcs), M8(10pcs), M10(5pcs), M12(5pcs). Totally 60 piece. Package into a plastic grids case and each size sorted a grid separately, widely used in daily life,mainly used in various low strength materials, which is helpful to improve the wear resistance of bolt connection....
Check Stock

McGard 24557 Chrome Cone Seat Wheel Locks (M12 x 1.5 Thread Size) - Set of 5

  • For use with steel or aluminum wheels with lug nuts that utilize a 60 degree tapered cone seat at the bottom. Kit includes Wheel locks, unique key tool and ID card.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards..
  • Please note that wheel lock sets are application-specific products. You must confirm proper fitment for your vehicle by using the Amazon part finder or consulting our website. Please review important fitment notes provided. Also note the type of seating your wheel locks require they can be either radius, flat or cone seat this has to be done visually by the customer to insure a proper fit before purchase and install along with correct shank length and thread size that matches your current lug nuts.
  • Due to the unique key patterns, the pattern shown in i....
Check Stock

McGard 24216 Black Cone Seat Wheel Locks (M14X1.5 Thread Size) - Set of 4

  • For use with steel or aluminum wheels with lug nuts that utilize a 60 degree tapered cone seat at the bottom. Kit includes Wheel locks, unique key tool and ID card.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards..
  • Please note that wheel lock sets are application-specific products. You must confirm proper fitment for your vehicle by using the Amazon part finder or consulting our website. Please review important fitment notes provided. Also note the type of seating your wheel locks require they can be either radius, flat or cone seat this has to be done visually by the customer to insure a proper fit before purchase and install along with correct shank length and thread size that matches your current lug nuts.
  • Due to the unique key patterns, the pattern shown in images will differ from the pattern on the locks you receive. If ordering multiple lock sets, the keys will not match. McGard keys will not match OEM locks installed....
Check Stock

McGard 24515 Chrome Cone Seat Wheel Locks (M14 x 1.5 Thread Size) - Set of 5

  • For use with steel or aluminum wheels with lug nuts that utilize a 60 degree tapered cone seat at the bottom. Kit includes Wheel locks, unique key tool and ID card.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards..
  • Please note that wheel lock sets are application-specific products. You must confirm proper fitment for your vehicle by using the Amazon part finder or consulting our website. Please review important fitment notes provided. Also note the type of seating your wheel locks require they can be either radius, flat or cone seat this has to be done visually by the customer to insure a proper fit before purchase and install along with correct shank length and thread size that matches your current lug nuts.
  • Due to the unique key patterns, the pattern shown in images will differ from the pattern on the locks you receive. If ordering multiple lock sets, the keys will not match. McGard keys will not match OEM locks installed by ....
Check Stock

McGard 24516 Black Cone Seat Wheel Locks (M14 x 1.5 Thread Size) - Set of 5

  • For use with steel or aluminum wheels with lug nuts that utilize a 60 degree tapered cone seat at the bottom. Kit includes Wheel locks, unique key tool and ID card.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards..
  • Please note that wheel lock sets are application-specific products. You must confirm proper fitment for your vehicle by using the Amazon part finder or consulting our website. Please review important fitment notes provided. Also note the type of seating your wheel locks require they can be either radius, flat or cone seat this has to be done visually by the customer to insure a proper fit before purchase and install along with correct shank length and thread size that matches your current lug nuts.
  • Due to the unique key patterns, the pattern shown in images will differ from the pattern on the locks you receive. If ordering multiple lock sets, the keys will not match. McGard keys will not match OEM locks installed by ....
Check Stock