Reviews Manifold Fitting

A-Team Performance - Air Conditioning AC Fitting Manifold Kit - for SD7 Compressor\A-Team Performance - Air Conditioning AC Fitting Manifold Kit - for SD7 Compressor

  • Air Conditioning AC Fitting Manifold Kit - for SD7 Compressor "A-Team Performance - Air Conditioning AC Fitting Manifold Kit - for SD7 Compressor.
  • This A-Team Performance air conditioning manifold fitting kit will allow you to complete the installation of your vehicle's A/C system.
  • Allow you to complete the installation of your vehicle's A/C system..
Check Stock

MASTERCOOL HVAC Digital Manifold Complete Kit with 72 Standard Hoses MSC-99772-A

  • HIGH QUALITY: High quality rubber make the AC Diagnostic Manifold Gauge Sets Shockproof and shatter-resistant. Aluminum forged MANIFOLD body with (3)....
  • GAUGE PRESSURE RANGE: Burst pressure: 600-3000Psi working/bursting pressure. Blue gauge (low): 0-350 PSI.
  • QUICK DISCONNECT COUPLERS: High & Low pressure fittings included.
  • Each coupler have a shut off valve to prevent loss of refrigerant.
  • CONTENTS: Include 3-Colored 5 Ft/60 Inch Red/blue Charging Hoses, 1/4 Sae fitting on both sides for Red & blue, 1/2 Acme fitting on both sides for....
  • APPLICATION: R134A Professional Manifold Gauge Set. Ideal for R134A, R404A, R407 refrigerants.
  • Designed for AC Freon charging, evacuation (vacuum),....
Check Stock

SMC KM11-07-11-6 PBT Push-To-Connect Tubing Manifold, 2 Inlets-3/8\

  • Port A One-touch Fitting, Port B One-touch Fitting.
  • One-touch fittings give the most efficient operation.
Check Stock

ARB 12 Volt High Performance Twin Air Compressor & E-Z Deflator Airline Tire Inflation Kit & Air Locker Manifold Kit

  • Boost Projects Custom Kit Includes: ARB 12V High Performance Twin Air Compressor & E-Z Deflator & Airline & Tire Inflation Kit & Air Locker Manifold....
  • Air Compressor Kit Includes: Fully assembled and tested air compressor (12V). Complete wiring loom w/ Air Locker solenoid plug-in terminals.....
  • Manifold Kit Includes: Manifold body with mounting bracket. 2x 1/8_ѝBSPP ports for installation of up to 2 x Air Locker solenoids. 2x 1/4_ѝ NPT....
  • E-Z Deflator Kit: The unique, patented design of the E-Z deflator allows for removal of the valve core for rapid tire deflation, while also providing....
  • Tire Inflation Kit Includes: 1 x High heat pressure hose (18ft long) 1 x ARB air chuck with quick press fitting 1 x ARB T-fitting for use with the....
Check Stock

SMC KM13-06-08-3 PBT Push-To-Connect Tubing Manifold, 2 Inlets-8 mm, 3 Outlets-6 mm Tube OD

  • Port A One-touch Fitting, Port B One-touch Fitting.
  • One-touch fittings give the most efficient operation.
Check Stock

Dorman 615-188 Engine Intake Manifold Compatible with Select Ford Models

  • Ideal replacement - this intake manifold is engineered to reliably replace the original equipment manifold on select Ford vehicles with 5.4L V8 engines.
  • Made in USA - designed, engineered and manufactured in the United States to deliver consistent quality and precise construction.
  • Proven design - features multiple improvements that make it look slightly different than the factory design but still match factory fit and performance.
  • Complete kit - includes manifold, auxiliary coolant fitting, thermostat, specially designed gaskets, O-ring and self-tapping screws.
Check Stock

Loc-Line - 32094 Coolant Hose Component, Acetal Copolymer, In-Line Valve, 1/2\ Hose ID, 20 PSI (Pack of 2)

  • Kit includes 2 piece 1/4" segments, 1 piece 1/4" MNPT valves, 1 piece 1" flare nozzle, 1 piece 1/4" round nozzle, 1 piece 1/8" round nozzle, 1 piece 1/16" round nozzle.
  • Also includes 1 piece magnetic base manifold, 3 piece 1/4" plug, 1 piece 1/4" barb fitting.
  • Magnetic Manifold allows distribution of coolant through 4 separate openings from one source.
  • Magnet can mount on spindle or worktable for convenient access to the work piece.
  • 1/4" ports accept any 1/4" standard fitting.
Check Stock

Eastwood First Air Pipe for Dual Blaster Replacement Air Line 10 Inch

  • Replacement Air Line For Dual Blaster To Connect Tank To Manifold.
  • This Is The Line Approx 10 in. Length That Attached To The Tank At The Fill Opening Fitting.
Check Stock

LEIMO KPARTS AC Diagnostic Manifold Gauge Set for Freon Charging, Fits R410A R22 R404 Refrigerants, 1/4' Thread Hose Set 60' with 2 Quick Coupler-r410a Manifold Gauge Set

  • AC A/C Manifold Gauge Set —- 3-way air conditioning diagnostic manifold gauge set for R404a, R410a, R22 refrigerants. Designed for AC charging, diagnostic check and recovery work.
  • Necessary tools for HVAC, car air condition maintenance and coolant or Freon adding.Widely used for household air conditioning units.
  •  Refrigerator, air conditioner and industrial refrigeration equipment..
  • Easy to operate and install, strong sealing for durability and safety.The solid brass gauge threaded connector and hose fitting is different from the brass plated construction, corrosion-resistant and rustless——ideal for professional auto mechanics. .
  • Freon Charging Hose 4000PSI Burst 800PSI Max W.P. each hose is approx. 5ft ( 60 inches / 152 cm) with 1/4″ SAE fitting——HIGH PRESSURE HOSES with ¼” SAE standard fittings using the highest technology rubber materials giving the hoses the most flexibility and reducing the risk of kinking.
  • Include 3-PC 5FT extra long Freon charging hose, 3 color for easily recognition, red for high pressure, blue for low pressure, yellow for refrigerant bottle –r410a manifold gauge set.
Check Stock

Dixon AMF43 Aluminum Air Fitting, Bar Manifold, 3/8\ NPT Female, 8\ Length x 1-1/2\ Height

  • The bar manifold can be mounted on a wall or work bench, safely distributing four hose lines to a work area.
  • Maximum working pressure is 300 psi at ambient temperature (70 degree F).
Check Stock

1/4\ BSP Female 2 Way 4 Port Solid Aluminum T-Shape Pneumatic Fitting Air Manifold Block Splitter

  • The bar manifold can be mounted on a wall or work bench, safely distributing four hose lines to a work area.
  • Maximum working pressure is 300 psi at ambient temperature (70 degree F).
Check Stock

MASTERCOOL 83736-K Deluxe R134a/R1234yf Conversion Kit, Blue, Red

  • EASILY CONVERT any R134a manifold gauge set to a R1234yf manifold gauge set.
  • DELUXE R1234yf HIGH AND LOW SIDE COUPLERS meet SAEJ639 and J2888 and allow recovery of entire refrigerant, including the space between the coupler & fitting.
  • MALE X FEMALE ADAPTER is 1/2” ACME-M x 1/2” ACME-F LH thread.
  • (2) MALE X FEMALE ADAPTERS are 12mm-M x 14mm-F R1234yf.
Check Stock

SMC KM12-06-02-6 PBT Push-To-Connect Tubing Manifold, 2 Inlets-Rc(PT) 1/4 Female, 6 Outlets-6 mm Tube OD

  • Port A One-touch Fitting, Port B Rc(PT) Female Thread.
  • One-touch fittings give the most efficient operation.
Check Stock