Reviews Heating Manifold

Remflex 3003 Exhaust Gasket for Ford V8 Engine, (Set of 2)

  • 1-1/8 inch width x 1-1/2" height Stock Square Port.
  • Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 2006 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • 1-3/8 inch width x 1-1/2 inch width Square Port - Matches the Stock cast iron Head Port.
  • Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, Stock Port, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1404.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Check Stock

SolarPoolSupply Panel Installation Kit for Solar Pool Heaters (2" I.D. Header)

  • Contains the necessary parts for mounting a single solar pool heating panel to a supporting surface (roof or rack) and making water connections from one panel to another..
  • Compatible with any solar pool heating panel featuring a round 2” I.D. header manifold and makes attachments with a rubber coupling..
  • Made from high-quality materials, specifically designed for solar pool heating systems..
  • Rubber Couplings: Made from durable UV-resistant EPDM rubber for long life in direct sun. Contain hose-clamp indicator ridges for perfect placement and seal. A reinforced center prevents deformation from pressure and vacuum..
Check Stock

Remflex 8002 Universal Exhaust Gasket, (Set of 2)

  • Universal 3” Collector Flange, 3 Bolt Holes, 3-3/8" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 2008 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - 4.8L, 5.3L, 6.0L LS2 ('99-'08), 5.7L, LS1 LS6 ('97-'08), includes Vortec, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1440.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

TurboKlone HGC747400 T24 Cloner Turbo Mini Hydroponic Cloning System, 24 Site, Black

  • Quick start guide provides a few basics on TurboKlone set-up, operation & taking cuttings.
  • Submersible Pump/Manifold provides a fine spray of continuous water & oxygen to your cutting.
  • Fan/Shroud keeps the TurboKlone system cool & prevents over-heating.
  • Designed for strength and easy cleaning via rounded edges.
  • Klone site systems(up to 60% more sites than other systems of similar size).
Check Stock

Carburetor Intake Manifold Boot Joint for Yamaha Warrior 350 YFM350X 1987-2004, Fit for Yamaha Wolverine 350 YFM350FX 4x4 1995, 1UY-13586-01-00, 1UY-13586-02-00, CNC 6061-T6 Aluminum Alloy

  • 1. Fitment - CNC aluminum alloy carburetor carb intake manifold boot fit for Yamaha Warrior 350 YFM350X 1987-2004, fit for Yamaha Wolverine 350 YFM350FX 4x4 1995.
  • 2. Reference OE Number - 1UY-13586-01-00, 1UY-13586-02-00.
  • 3. Function - Replacing the new intake manifold interface can solve problems such as high idle speed, weak acceleration and easy flameout during acceleratio. The carburetor intake manifold boot replaces the old or broken manifold boot perfectly..
  • 4. Material + Installation - Carburetor carb intake manifold boot made of premium quality rugged design with aluminum alloy material, for extended lifetime, with high temperature resistance, high pressure resistance and other advantages. Easy to install, just replace the old or broken intake manifold interface during installation.
  • 5. Service - We offer CNC aluminum alloy carburetor carb intake manifold boot 2-years shelf life, hassle-free return and money back policy, buy with confidence! any questions about carburetor carb intake manifold boot, please contact us by email, we will reply you within 12 hours, you will get a brand new CNC aluminum alloy carburetor carb intake manifold boot.
Check Stock

MOSTPLUS 615-175 329-01780 W7Z9424AA1 Intake Manifold Compatible with Ford Crown Victoria Explorer Mustang 4.6L

  • 【Fitment】— Compatible for 2001-08 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit W) , Compatible for 2006-11 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit V) , Compatible for 2001-05 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit 9) , Compatible for 2002 Ford Explorer Intake Manifold V8 4.6L (8th Vin Digit W) , Compatible for 1999-04 Ford Mustang Intake Manifold V8 4.6L (8th Vin Digit X)(Detailed Apllication below).
  • 【OEM Part Number】 — 1W7Z9424AB, 329-01780,3W7Z9424AA,3W7Z9424AD,615-175.
  • 【Function】— The intake manifold supplies air to the cylinders of an engine. High quailty material, excellent performance, high resistance..
  • 【High Quality】— This intake manifold is made to meet or even exceed the standard quality to help your car start normally..
  • 【Note】— Not correct for models with coolant-heated PCV. Please check the year, make, model and trim of your vehicle in the garage before purchase..
Check Stock

Exhaust Manifold Bolt Repair Kit Compatible with GM Trucks & SUV's（1999 & Newer ）With a 4.8, 5.3, 6.0 or 6.2 L

  • No need to remove broken bolts, The exhaust manifold bolt repair kit will repair the exhaust leak without having to remove the cylinder head or drill out and replace the broken end bolts.
  • Install this part is to repair the driver's side front or the passenger side rear corner broken exhaust manifold bolts.
  • Exhaust manifold repair kit compatible with Trucks & SUV's (1999 & Newer) With a 4.8, 5.3, 6.0 or 6.2 L.engine size..
  • Material: Exhaust manifold repair brackets made of carbon steel, exhaust manifold bolt repair brackets will not fail like the bolts do from heat and expansion of the manifold.
  • We value your shopping experience, If you encounter any problems in installing the exhaust manifold stud repair kit, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

Fear

  • Advanced digital refrigerant manifold & micron gauge for HVAC & Refrigeration diagnostics & service.
  • Fieldpiece digital manifold gauges accurately measure low & high pressure, with superheat and subcooling.
  • Advanced digital refrigerant manifold has protected thermocouple jacks for pipe and outdoor temps.
  • Four valve manifold with vacuum gauge has the ability for Job Link Psychrometer probes to connect to SMAN.
  • Equipped with a data log and temperature compensated system tightness test.
Check Stock

Fieldpiece SM380V SMAN manifolds, Black

  • Toughest, most advanced digital refrigerant manifold on the market.
Check Stock