Reviews Male Threaded Ball Valve

2 Pieces Air Compressor Valve ,Ball Type Drain Valve Brass Mini Ball Valve, 1/4 Inch NPT Male x NPT Female for Air Compressor

• It can drain water or other harmful liquids thoroughly, which can ensure gas quality and prevent corrosion of pneumatic tools and piping components.
• 1/4 Inch female and male NPT threads: this compressor valve has type-1/4 inch standard connections, female and male NPT threads for connecting male threaded pipe fittings to female threaded pipe fittings, please check the thread information carefully before buying.
• Besides, it is designed with pre-applied thread sealant for airtight connections and O-ring free construction.
• Extensive usage: air compressor valve has a wide range of application including air, gas, liquid, steam, air compressor, air tank, water tank, air bottle and more, can drain water or other harmful liquids, gas thoroughly to ensure gas quality and avoid corrosion of pipes.
• Quality brass to make: air tank drain valve uses quality brass to make, so it is stable and not easy to break, safe and reliable, with corrosion resistance, wear resistance, allowing you to use it with confidence for a long period.
• Better work performance: brass mini ball valve is equipped with lever handle for convenient on/off manual control and full port flow, giving you higher operating efficiency and better work performance.

DAN SPEED 1.5 NPT Female Threaded Full Port Ball Valve with Blue Vinyl Lever Handle,316 Stainless Steel,WOG1000

• Body & Ball Type:Full Port, Low Operation Torque,Temp Range:-60F to 450F.
• The valve is fitted with PTFE seals for maximizing corrosion resistance and lifespan of the ball valve.
• This ball valve is made of Stainless Steel 316 and has a plastic-covered lever handle for on/off manual control.
• Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas. Fluid Medium:For use with liquids and gases.
• This inline valve has a Standard port flow and 1.5" female National Pipe Taper (NPT) threads for connecting two male threaded pipe fittings going in....

DERNORD 1/2\ Stainless Mini Ball Valve Female x Male NPT Thread with Stainless Steel Handle Pack of 2

• 0.5 Inch NPT Female&Male threads for connecting to male threaded pipe fittings.
• SUS316 body and ball for extra strength and corrosion resistance.
• Inline valve for connecting two pipes going in the same direction with Double-seal system.
• Heavy duty stainless handles to increase service life, fast 1/4 turn open or closed operation.
• Standard port flow for smaller valve size, each valve individually tested for maximum safety about Water, Oil, and Gas(no freezing).

HydroTools by Swimline Precision Male & Female Threaded Ball Valve for Pools

SHYOKO 1-1/2 Inline PVC Ball Valve Compact T-Handle Water Shut Off Valves Female Thread [Available 1/2 ,3/4 ,1 ,1.25 ,2 ]

• 1-1/2’’ - Meets ASTM and ANSI standards.
• Maximum pressure rating of 150 psi at 73°F.
• Santoprene seats and stem packing reduce the risk of leakage.
• NPT female threaded for connecting to male threaded pipe fittings.

Frost King FC2 Plastic Covered Faucet Cover, Rectangular

• Durable non-corrosive plastic construction.

SHYOKO 1-1/2 Inline PVC Ball Valve Compact T-Handle Water Shut-Off Valves Female Thread [Available 1/2 ,3/4 ,1 ,1.25 ,2 ]

• PVC MATERIAL - PVC for corrosion resistance, high strength, and less weight than fittings made from metal, saving cost and accelerating the project....
• THREAD & 150 WOG - Female threaded for connecting to male threaded pipe fittings. 150WOG working pressure, suitable for irrigation and water supply..
• SAFETY - T handle for manual on/off control, easy operation.
• Santoprene seats and stem packing reduce the risk of leakage..
• ASTM - 1-1/2’’ ball valve, suitable for indoor and outdoor use like with cess-pipe, landscape and irrigation, pool, cold water, venting, waste....
• DURABLE - Each valve individually tested for maximum safety blow-out proof stem, ageing resistant and long service life..

SHMONO Inline PVC Ball Valve 1-1/2 inch Compact Single Handle Water Shut-Off Valves Female Thread x Female Thread [Available 1/2 ,3/4 ,1 ,1.25 ,2 ]

• Maximum pressure rating of 150 psi at 73°F.
• NPT female threaded for connecting to male threaded pipe fittings.
• 1-1/2’’ - Meets ASTM and ANSI standards.

Aupoko R134A R12 Valve Core Quick Remover Installer, Air Conditioning Adjustable High Pressure (Red) and Low Pressure (Blue) Valve Core Tool, 2 Pack

• ☀ ADJUSTABLE --- The R12 valve core quick remover installer is adjustable to fit the different valve core. Good for vehicle/car/auto air condition, household air conditioner, HVAC Maintenance or repairing..
• ☀ WELL-DESIGN --- Built-in stainless-steel ball valve: the well-designed ball valve and threaded remover lets the user block off the system while changing the valves cores, allowing for no refrigerant loss..
• ☀ 1 YEAR WARRANTY --- Valve Core Quick Remover Installer sets are made by high quality brass alloy, last long.
• easy to operate and install, strong sealing for durability and safety. We offter 12 months warranty, if it can’t work normally during the warranty time or any other question, please feel free to contact us, we will refund or reship for you without any reason..

3/4\ NPT Female Threaded IPS Ball Valve Full Port Water Stop Shut Off,Heavy Duty Lead Free Brass,Quarter Turn,Blue Handle (1-Pack)

• 3/4" NPT Female Threaded IPS Brass Full Port Water Stop Shut Off Ball Valve ,Heavy Duty Lead Free ,Quarter Turn.
• Heavy duty: forged Brass ball valve pressure is rated 150 psi wsp for steam and 600 psi woc for water, oil and gas.
• 3/4" Threaded IPS Lead Free Brass Water Cut off Ball Valve.
• Size: 3/4" IPS Brass Ball Valve Max Pressure (PSIG):150 Max. temperature: 200°F.
• IAPMO Listed to cUPC - "Lead-Free" Compliant.

lukar 3/8" High Pressure Washer Ball Valve Kit with Teflon Tapes for Power Washer Hose, 4500 PSI

• ①【Superior 3/8 Ball Valve】: lukar 3/8" ball valve pressure washer is made of high quality stainless steel + copper, durable, leakproof, rustproof, high temperature and pressure resistant.
• ②【High Pressure Ball Valve Specification】 : 3/8" high pressure ball valve kit. 3/8" quick connect plug, 3/8" male NPT thread.
• 3/8" quick connect socket, 3/8" male NPT thread. Max working pressure: 4500 PSI, Max working temperature: 158 °F.
• ③【Easy to Use】: The 3/8 high pressure washe ball valve kit is easy to turn on and turn off, and provides good leverage under high pressure. Easy to connect to surface cleaner ,pressure washer gun, nozzle, pump and high pressure hose.
• ④【Leak Proof】: lukar high pressure ball valve kit comes with 2 x teflon tapes. Teflon tape is used to wrap around the thread to effectively prevent water leakage.
• ⑤【Package Includes】: 1 x high pressure washer ball valve.
• 2 x Teflon Tapes, 2 x thread protection covers(Shown in the first image in listing).

RIDGE WASHER High Pressure Ball Valve Kit for Power Washer Hose, 3/8” Quick Disconnect, 4500 PSI

• High pressure ball valve kit includes a ball valve and two adapters. The adapter set converts 3/8” quick coupler plug to 3/8” male NPT thread and 3/8” quick coupler socket to 3/8” male NPT thread..
• Working pressure is up to 4500 PSI. The max working temperature is 158 °F..
• The steel pressure washing ball valve is superior leak resistance. Easy to connect ball valve to gun, pump and hose..
• The ball valve is easy to turn on and off, provides good leverage under high pressure, designed for high-pressure hose..
• If you have questions, contact us at any time. We provide a service of quick reply within 24 hours. Welcome to RIDGE WASHER to see other pressure washer accessories..

Kitchen Faucet Diverter Valve with Aerator Utility Sink Bathroom Faucet To Hose Adapter Brass Bath Faucet Water Filter Replacement for Switch Water Connector to Bidet Shower Chrome DV2016

• Premium Durable Chrome Plated Brass Faucet Diverter with Aerator & Male Threaded Adapter to Connect to Any Sink That Has a Removeable Aerator.
• A simple push of a lever diverts the water from the sink’s faucet to the attached hose that fits standard 1/2″ inch threads.You can bidet and clean all sorts of things in the kitchen/bathroom. Use this diverter, you no need to run out of hot water using a shower head for rinse off compared to cups. Also allows you to prewar the shower rinse in the sink without dumping a bunch of cold water in the tub.
• Sink valve converter is easy to install and functionable,allows you to use the faucet for a warm water bidet setup between faucet and sprayer by adjust the quarter turn lever(can’t shut off the water).
• Please kindly check the faucet aerator dimension or take measurement of the connected hose before buying. It is a Valve Diverter for kitchen sink faucet(without areator connector) or basin/bath faucet(with connector), M22 x M24 connection sizes..
• An included Male Threaded Adapter is part of the package to convert female threads to male threaded faucet connector. With the INTERIOR SOLUTIONS Faucet Diverter w/Aerator & Male Threaded Adapter, you’ll never have to deal with cold water agai....