Reviews Makita Cordless Drills
Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry
- ✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
- ✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
- ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
- ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
- ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....
Check StockSabre Tools 1/2 Inch x 18 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (1/2\ x 16\ x 18\)
- ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
- ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills.
- ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
- ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/an....
Check Stock4 Pack Drill Brush Set- Electric cleaning brush kit- All Purpose Drill Brush with Extend Attachment for Bathroom Surfaces- Grout- Floor- Tub- Shower- Tile- Corners- Kitchen.(Yellow)
- COMPATIBILITY - The three different sized brush heads allow you to easily scrub those hard to reach or large surfaces. Truly a perfect way to make every nook and cranny of your house absolutely spotless! The brushes fit into almost all cordless drills including Dewalt, BLACK+DECKER, Bosch and Makita etc..
- EFFORTLESS, POWERFUL CLEANING - This scrubber brush set is the power brush drill attachment that attaches to your cordless drill. These nylon bristles will not scratch and can be used on tubs, sinks, baseboards, fiberglass shower enclosures, shower door tracks ..
- QUICK CHANGE SHAFTS - When you are ready to change out your drill cleaning brush attachment simply pull out our innovative quick-change shafts and easily install a new brush. Press your brush against the surface you want to clean and start the drill. Your surface will be spotless in no time..
- TIME SAVING -Try Drill Brush Cleaning brushes and Scouring Pads that attach to any cordless drill or impact driver, become a powerful cleaning tool. Get stubborn cleaning jobs done faster and achieve a deeper clean, definitely a good partner for your household cleaning..
- 100% RISK-FREE: If you are not completely satisfied with our product we will issue a full refund or ship out a replacement at the buyer's....
Check StockAircraft Tool Supply Rivet Removal Tool
- Easily convert your cordless, pneumatic or corded drills into a power rivet nut setter.
- Use 12V and up cordless drills for aluminum and steel rivet nuts, or 18V+ for larger sizes like M10 & 3/8" and/or stainless (drills must feature torque limiting clutch).
- CNC machined from solid billet aluminum and features durable bearings.
Check StockDEKOPRO Rivet Gun for Cordless Drill Riveter Electric Rivet Nut Gun Riveting Tool Cordless Riveting Drill Adaptor Insert Nut Tool
- Easily convert your cordless, pneumatic or corded drills into a power rivet nut setter.
- Use 12V and up cordless drills for aluminum and steel rivet nuts, or 18V+ for larger sizes like M10 & 3/8" and/or stainless (drills must feature torque limiting clutch).
- CNC machined from solid billet aluminum and features durable bearings.
Check StockVeggies Spiralizer Slicer for Electric drill 3-Blade Food Processor Chopper Adaptive all the Electric drill , Vegetable Spiralizer with Container, Ribbon,Spiral,Blend,Dishwasher Safe(Green)
- 【Veggies Spiralizer for Drills】 The 3-in-1 Food Slicer can slice, Ribbon, and make stringy spirals used for salads, vegetable garnishes, pastas, noodles, and more! Efficient processing makes your cooking a lot easier..
- 【Fit For All Types of DrillsDrill NOT included】- Link the Vegetable Slicer to your cordless drill (The vegetable slicer fits for almost all drills including Dewalt, BLACK+DECKER, Bosch and Makita etc) turn the ordinary drill into a powerful electric vegetable slicer. Much Easier to control the speed to meet your need with the speed trigger..
- 【Portable and Easy to Store】Our food processor can also process food manually. Small size is more convenient for us to carry, outdoor picnic/camping, no matter where we can enjoy the fun of cooking..
- 【BPA-Free Premium Safe Material】Made of food grade plastic, strong and safe.which is harmless to your family.Safe for containing food. The vegetable chopper built-in 304 food grade stainless steel blades that are more resistant to rust and corrosion..
- 【Design for Easy Cleaning】 Both the bottom and blade group of the food slicer can be removed. The whole body of the crusher is waterproof. You can directly rinse the food chopper after use, which is easy cleaning with no residue..
Check StockPOWERAXIS 1.5Ah 10.8V BL1014 BL1013 Battery Replacement for Makita 10.8V-12V Max Li-ion Battery BL1013 BL1014 194550-6 194551-4 195332-9 CL100DW DF330D FD01ZW
- 【Battery Parameter】Battery type:Li-ion, Voltage:10.8V/12V Max, Capacity:1500mAh/1.5Ah(16.2Wh), Color:Black. No Fake High Lable Capacity..
- 【Replacement Battery PN.】Ideal Replacement Battery for Makita BL1013 BL1014 194550-6 194551-4 195332-9..
- 【Compatiable with Makita Cordless Tools】Fits for Makita CL100DW CL100DZ CL102DZX FD01W JV100DW TD090D DF030D etc. This BL1013 battery is fully Compatible with Makita 10.8 Volt Cordless Drill Power Tools..
- 【Multiple Protections】Our BL1013 batteries are CE/RoHS/FCC certified. Safeguard features against incorrect voltage, battery overload, short circuit, internal overheating..
- 【What You Get】1 x BL1013 Battery, Instruction Manual, 30-day money back, worry-free 12-month warranty and 24-hour friendly customer service..
Check StockMakita 3 Piece - SDS-Max Chisel & Point Bit Set for SDS Max Rotary Hammers - Heavy Demolition for Reinforced Concrete & Tile
- ✅ Makita's 3-Piece SDS-MAX Shank DEMOLITION BIT Set with Steel Case For SDS-MAX Chuck ONLY Rotary Hammer Drills with dedicated 3 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Point Bit, Flat Chisel & Scaling Chisel for EASY Demolition into all your Reinforced Masonry, Concrete, Brick, Tile & Cinder Block application.
- ✅ 4 Piece SDS-Max Shank Demolition Set includes: 1 Heavy-Duty Carrying Case + 1 Point Bit of 15" + 1 Flat Chisel Bit of 15” x 1" Wide + 1 Scaling Chisel Bit of 15" x 2” Wide | Engineered in Japan for optimal use with Makita SDS-Max Rotary Hammer while also fully compatible with All SDS-MAX Rotary Hammers.
- ✅ EASILY Demolish concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s HARDENED, Single, Cold-Steel Piece Bits with industry-leading Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE, SAFE Chiseling & RELIABLE Demolition | Each Premium Makita bit is uniquely forged and heat-treated, designed for chipping, scaling and large area surface removal.
- ✅ AVOID LOWER PRICED & lower quality Chisel and Point bits that prematurely wear and strain the powertool, resulting in high bit consumption rate, project completion delays, ineffective demolishing and making the overall chiseling much more difficult | ....
Check StockINTOO Drill Bit Set 21 Piece 1/16'-1/2' Quick Change Impact Driver Bit Set
- Specifications: 21pcs titanium drill bits set, include 1/16X2,5/64X2,3/32X2,7/64X2,1/8X2,9/64,5/32,11/64,3/16,13/64,7/32,15/64,1/4,5/16,3/8,1/2 with 1/4 hex shank.
- Highlights: Special plug hex shank of quick change drill bit is an upgrade version, it shows excellent performace than normal pressed hex shank, avoid drills peeling from the hex shank, effectively keep hex shank locked with drill bits during impact drilling process..
- Characteristics:135° split point not only promises cutting speed,but also prevents slipping when start drilling;Titanium coating increases the ware-resistance and durability, effect long life drilling. Non-disposable packing makes sure the drills well stored..
- Quick change: 1/4 inch hex shank of hex bit set well fits all power tools,especially for locking into quick change chucks,suitable for makita drill and makita impact driver, dewalt drill bits set,milwaukee drill bit set,effects quick change more easily and securely..
- Widely used: industry grade high speed steel drill bit sets with high hardness, can be widely used in Steel, Wood, Plastic, etc. Ideal for DIY, home and general building/engineering using.Ideal impact drill bit set and drill bits for metal..
Check StockStoreYourBoard Electric Drill Storage Rack, Holds 4 Drills, Hanging Wall Mounted Organizer for Garage, Home, Workshop, Shed
- ORGANIZE YOUR WORKBENCH: Wall-mounted storage for up to 4 cordless drills, impact drivers, or hammer drills..
- INDUSTRIAL GRADE: Heavy-duty stamped steel design supports up to 35 lbs. Durable powder coating protects against scratches..
- EASY TO INSTALL: No assembly required! Mounting hardware is included. Designed to fit standard 16" wall studs..
- QUICK TOOL ACCESS: Hang your drills at arms' reach for easy access during your projects. 1.5" wide slots fit most cordless drills..
- DESIGNED IN THE USA at our headquarters in Troy, Virginia. Engineered & tested to meet our high standards of quality..
Check StockDriverMaster | Clip-On Tool Belt Drill Holder - Simple Hook Holster for Cordless Drill, Impact, Nailer, Tape Measure, or Any Tools with Hanger Clips
- WORK LIGHT AND FAST | Carry your drill, impact, or nailer in this low-profile holder that clips easily on and off of your belt, pockets, or tool bags..
- HOOK YOUR DRILL EASILY WITH ONE HAND | Great for working on ladders or crawling through attics and crawlspaces..
- WORKS WITH A WIDE RANGE OF DRILLS | DriverMaster is compatible with tool hanger clips on Milwaukee, Dewalt, Makita, and any cordless tools with hanger clips. Small or large battery packs..
- SAVE YOUR PANTS | Prevent wear and tear on your pants pockets. Position the DriverMaster on your belt for left or right-hand use..
- CLIP-ON AND GO | Comes with a low-profile belt clips that fit belts up to 1.75 inches (45mm). A great addition to your tool belt or by itself when you want to lighten your load..
- ASSEMBLED IN IDAHO, USA | Durable holster Kydex frame, 100% polycarbonate belt clip, and a steel hanger..
Check StockAstro Pneumatic Tool ADN14 Rivet Nut Drill Adapter Kit
- Easily convert cordless or corded drills into power rivet nut setters.
- Includes 8 mandrels and nosepieces in Metric and SAE: M3, M4, M5, M6, 8-32, 10-32, 10-24 and 1/4-20.
- The only model on the market that pulls the rivet nut instead of turning threads to set, causing less wear.
- Innovative design withstands 4X the force of other adapters, and features a CNC machined billet aluminum body and Cr-Mo mandrels.
- Use 12V and up cordless drills for aluminum and steel rivet nuts, or 14.4V and up for stainless up to 1/4" (all drills must feature torque limiting clutch).
Check Stock2PCS BL1021B Battery with Charger DC10WD Replace Compatible with Makita BL1021B BL1016 BL1041B 197339-1 197406-2 BL1040 BL1040B BL1015B 10.8V & 12V Battery 2000mAh
- 2pcs battery Compatible with Makita BL1021B (BL1016) BL1020B BL1041B BL1040B BL1040 BL1015 BL1020B 197402-0 197390.
- 1pcs Charger Compatible with Compatible for MAKITA 10.8V 12V DC10WD DC10SB DC10WC BL1015 BL1016 BL1021B BL1041B.
- Replace Battery Compatible with: Makita DF031D DF331 DF0331D TD110D, JR103D, JR105D, HSS01D, HP332D, DC10SB DS032 DMR108 DMR110 HP330 HP331 HP331DSMJ HP332 TD110 DF331DSMJ HP332 TD110 DF331DSMJ HP332 TD110 DF331DSM10.
- Fits models: Makita Leichte Hämmer HR140D,HR140DZ,HR140DSMJ,HR166D,HR166DZ.
- Item: Battery for Makita CXT series ( NOT Compatible with LXT series ) + Charger.
- Works with all CXT range of cordless 10.8v Makita power tools..
Check Stock