Reviews Magnet Wire For Choke

Ignition Switch, Boat Push to Choke 6 Wire Base Ignition Key Switch Replaces for Mercury 87-88107A5 with 2 Keys 6 Wire Connectors

  • ... is made of marine-grade glass-filled polyester construction to ensure reliable performance and long service life, trustworthy quality.You can buy it with great confidence..
  • ✔️Boat Ignition Key is non-conductive housing eliminates potential shorts. Boat key switch with choke has maximum corrosion protection - eliminates oxidation. Replacing OE number for reference: 87-88107 , 87-88107A5, 7-1155. Fits Most Mercury Outboard Motors 1994 and Later using..
  • ✔️Position: Off - Ignition - Start,includes 2 keys. Ignition Switch Boat Push to Choke 6 Wire Base Mercury - inner seal between cylinder lock and contact plate.The maximum panel thickness is 5/8 inches, which is suitable for side-mounted controls or panels up to 5/8".Rated Up to 30 amps 12V.Direct Replacement. Ignition Key Switch with Push to Choke function, use with Magneto style ignition switch..
  • ✔️Easy install.Colors on switch wires match factory color codes. Direct replacement, a simple plug & play with no wire splicing. Meets or exceeds OEM standards, 100% tested before shipping. Please check the pictures of this boat ignition switch with key and comp....
Check Stock

PURESOUND Custom Pro Brass Snare Wire - Snare Drum Wires - Drum Wire - CPB1424 - 24 Strand 14 Inch

  • FOR 14 INCH SNARE DRUMS - Designed for 14" snare drums with 24 strands of wire.
  • SPEED RELEASE - Speed Release Strap allows the player to disengage the snare wires for quick head or snare wire changes.
  • ANTI-CHOKE PLATES - Anti-choke end plates lift the coils away from the edge to reduce sympathetic buzz and increase the wire tension range.
  • BRIGHT, RESONANT RESPONSE - Brass coil produces a bright and resonant snare response.
  • NUMBERED FOR ALIGNMENT - Numbered alignment marks on the straps ensure straight and repeatable positioning in the clamp.
Check Stock

ALL-CARB 237 Rotary Universal Push Pull Choke Cables 63 Inner 60 Conduit Travel 2-3/4

  • Inner Wire Length 63, Conduit Length 60, Wire Travel 2-3/4..
  • Package includes 1x Choke Cable kit as displayed..
  • Replace Part Number: 237, 703971, 290831..
  • Good Working Condition, Durable, Easy To Install..
Check Stock

Replacement Lawn Mower Engine Control Cable For Troy Bilt 946-1130 746-1130

  • Replacement Lawn Mower Engine Control Cable 946-1130 746-1130 YUELMAN.
  • Engine Control Cable as pictured Item Specifications: May be known as a control cable, choke cable, choke control, choke control cable, control assembly cable, brake cable Conduit Length: 40" Inner Wire Length: 53" YUELMAN.
  • Part Number: 946-1130 Replaces Part Number: 746-1130 YUELMAN.
Check Stock

87-17009A5 Boat Ignition Switch Replacement for Mercury Mariner Outboard Motor Control Box Ignition Key Switch with 2 Keys 3 Position 6 Wire Connectors for Mercury Push Choke Ignition

  • ➼Replace Ignition Key Switch – The boat ignition switch need to be replaced when you have to turn the key hard and the boat won't launch. Our boat Ignition switch with choke has great corrosion protection to eliminate oxidation. And the non-conductive housing of ignition key can prevent potential short circuit to extended service life..
  • ➼Replaces Part Number –This 6 wire boat ignition key switch fits for most Mercury Outboard Motor Control Box, replaces for Mercury OE part number: 87-17009A5, mp51090 mp41070-2. Please check the ignition switch part number carefully before you purchase..
  • ➼Feature - This Boat Engine Ignition Switch has 2keys, 6 wires for push to choke, and 3 position: Off- Ignition -Start. And it is made of high quality polyester and brass, the boat ignition switch with key has an excellent Corrosion resistance, Abrasion resistance and Conductivity.
  • ➼Easy Installation – The color of the Ignition switch wire matches factory color code, so it is easy to install push choke ignition switch, just match the wire color to install. Note: This ignition key switch is not a genuine Mercury part, it....
Check Stock

87-17009A2 Boat Ignition Switch Replacement for Mercury Mariner Outboard Motor Control Box Ignition Key Switch with 2 Keys 3 Position 6 Wire Connectors for Mercury Push Choke Ignition

  • ➼Replace Ignition Key Switch – The boat ignition switch need to be replaced when you have to turn the key hard and the boat won't launch. Our boat Ignition switch with choke has great corrosion protection to eliminate oxidation. And the non-conductive housing of ignition key can prevent potential short circuit to extended service life..
  • ➼Replaces Part Number –This 6 wire boat ignition key switch fits for most Mercury Outboard Motor Control Box, replaces for Mercury OE part number: 87-17009A2 17009A2, Sierra MP41070 MP41070-1 MP41070-2. Please check the ignition switch part number carefully before you purchase..
  • ➼Feature - This Boat Engine Ignition Switch has 2keys, 6 wires for push to choke, and 3 position: Off- Ignition -Start. And it is made of high quality polyester and brass, the boat ignition switch with key has an excellent Corrosion resistance, Abrasion resistance and Conductivity.
  • ➼Easy Installation – The color of the Ignition switch wire matches factory color code, so it is easy to install push choke ignition switch, just match the wire color to install. Note: This ignition key switch is not a g....
Check Stock

Husqvarna 530058662 Line Trimmer Choke Lever Genuine Original Equipment Manufacturer (OEM) Part

  • This part is compatible with models including.
  • 358791370,TE475Y,FX26SC,XT700,P1500,P3500,SST25,XT260,FX26SC TYPE 2,FX26SC TYPE 3,FX26SC TYPE 1,FX26 TYPE 2,FEATHERLITE SST25,FX26 TYPE 1,FX26SC TYPE 4,MX550,952711767,FL23,MX557,FL26,FX26S TYPE 2,P4500F,FX26S TYPE 1,P2500,P4500,SST25C,FX26,FX26S,TE475.
  • Choke lever 530058662 opens or closes the choke plate in the carburetor to help start the engine.
  • Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Weed Eater,Poulan,Craftsman.
  • This choke lever (part number 530058662) is for line trimmers.
  • Let the engine cool and disconnect the spark plug wire before installing this part.
Check Stock

Mr.Ho 10 AMP 12V Car Audio Radio Amplifier Noise Suppressor and Stereo Filter with Ground Loop Isolator

  • ELIMINATE NOISE -- H-density, lo-level wound torroid choke will eliminate ground loop noise between the audio source or audio amplifier. Keep a clear listening environment for you..
  • FUNCTION – It can reduce the noise in the audio system and reduce eliminates engine interference..
  • WIRES FEATURE -- Red wire for input, blue wire for output and black wire is ground wire..
  • EASY TO INSTALL -- Just splice the red wire to the line of 12V input, splice the blue one to the positive line, splice the black one to the ground wire..
  • SUITABLE ELECTRONICS – It is suitable for car audio, radio, amplifier stereo receivers, equalizers, and other mobile electronics..
Check Stock

BNTECHGO 28 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0122\ Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 28AWG magnet wire is 4 ounces(527 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 28 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0122"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 20 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0315\ Diameter 1 Spool Coil Natural Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 20AWG magnet wire is 4 ounces(80 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 20 gauge enameled magnet wire: Wrapped in spool and color is natural.Outside diameter 0.0315"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 20 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0315' Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 20AWG magnet wire is 4 ounces(80 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 20 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0315"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 22 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0256' Diameter 1 Spool Coil Natural Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 22AWG magnet wire is 4 ounces(122 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 22 gauge enameled magnet wire: Wrapped in spool and color is natural.Outside diameter 0.0256"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 22 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0256' Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 22AWG magnet wire is 4 ounces(122 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 22 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0256"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock