Reviews Line Steel Pipe

Rodeel 24 PCS Fishing Leaders Wire with 49 Strands Tooth Proof Stainless Steel with swivels

  • Package Content:24pcs fishing wire leaders rigs.
  • Length: 25cm/0.82inch,Line Diameter: 1mm/0.04inch,Steel wire Pulling Force:40KG/88.18LB.
  • Material:High-strength stainless steel wire +hot air pipe.
  • Design - 8-ring interface ring solves the winding problem, and use hot air pipe to wrap the snap and swivel, remain stable underwater, fish loading rate is higher.
  • Lamination fishing line- 304 stainless steel 49 stranded wire,very soft and strong. The 49 strand design makes it very durable, and the 304 lamination stainless steel wire used will not rust..
Check Stock

SHURFLO 255-325 1/2\ Barb Swivel Nut Strainer

  • Mini "T" line strainer pipe fitting for adding filtration to a pipe line.
  • Glass reinforced polypropylene for resistance to most chemicals and dimensional stability, and stainless steel 304 screen for resistance to corrosion and extreme temperatures.
  • 1/2" female NPT threaded connection on both ends.
  • EPDM gaskets standard. FKM (viton type) available.
Check Stock

Fuel Line Plier Petrol Clip Pipe Plier Hose Pipe Disconnect Release Removal Pliers Clamps Tool

  • 【Size】:The total length approx:9”/220mm, handle length approx:4”/100mm, Maximum opening approx:2.4”/60mm. Heavy duty design, 8mm....
  • 【High quality material】:This fuel pipe plier is made of high-quality steel material, which is durable and sturdy. It is not easily damaged, has....
  • 【Useing】:Suitable for installation of automotive water pipes and removal of spring bundle. Like fuel line, gasoline pipe, urea pipe, oil pipe..
  • 【Scope of application】:The fuel hose plier has high practicality, which is a practical tool for disassembling and replacing the connections on....
  • 【Design features】:The fuel line clip release plier designed according to ergonomics principle, which is labor saving and comfortable to use.Use....
Check Stock

Hilitchi Fuel Line Petrol Clip Pipe Pliers 9 Inch Fuel Filter Calipers Fuel Line Pliers and 80 Degree Disconnect Pliers Push Pin Pliers Set (Pack of 3)

  • ✅[QUALITY MATERIAL] Our fuel line pliers are made of quality carbon steel, high strength and with PVC handle, it makes you feel more comfortable and no hand fatigue during operation. Maximum opening approx 85mm/3.35inches. Suitable for installation of automotive water pipes and removal of spring bundle. Like fuel line, gasoline pipe, urea pipe, oil pipe..
  • ✅[QUICK DISCONNECT PLIERS] Featuring with black oxidation treatment, this disconnect pliers is made of high strength carbon steel and with durable spring, it surely will ensure a smooth operation experience for you. Low-profile design with 80 degree bend allows the tool to fit between the top of the fuel tank and vehicle..
  • ✅[9” PLIERS] Fuel filter caliper also made of carbon steel, featuring with a flexible spring, you could make it to the appropriate opening you want. Maximum opening approx: 32mm/1.26in. Also, they universally fit for all automobiles, suitable for releasing connections on fuel pipes during maintenance or when replacing fuel filters.
  • ✅[NICELY-PACKED PACKAGE] This fuel line pliers kit includes a hose pipe clamp, 80 degree disconnect pliers and 9 inch fuel filter calipers. Nice and neatly packed. All of the pliers are packed in a quality leather zipper bag. Elastic straps sewn ....
Check Stock

Excalibur 9-Tray Food Dehydrator and 4 ParaFlexx Dehydrator Sheets

  • Attach remote transmitter to drain cleaning cable or a water jet hose to locate pipe underground.
  • Flashing LED to indicate that sonde is transmitting and ready to operate as a beacon during underground pipe location.
  • Meets FCC Class B and EN 55022 Class B requirements.
  • Adapters (catalog # 19263, 19268, 19273, and 19258) attach transmitter to drum machine or sectional cables provide versatility in locating underground pipe and line detection.
  • Constructed with a solid steel core, abrasion-resistant urethane coating, and stainless steel wear ring for durability.
Check Stock

IKENIUP One Stop Gas Appliance Hook Up Kit, 22'' Stainless Steel Flexible Gas Connector with 1/2''Brass Gas Shutoff Valve for Gas Log, Gas Dryer, Garage Heater, Gas Stove, Wall Heater and Fireplace

  • ...are x 1/2" Male Pipe, 1/2" Male Flare x 3/8" Male Pipe & 1/2" Male Flare x 3/8" Female Pipe), 1/2" brass gas shut off valve, and yellow gas pipe thread seal tape. It has everything needed for installing most gas appliances and easy to install..
  • HIGHLY DURABLE & LONG SEVERITY LIFE - Made of High Quality 304 Stainless Steel. Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified.
  • it has good air tightness, durability, rust and corrosion resistance. It is the perfect choice for hooking up your gas appliances..
  • CORRUGATED DESIGNED - The stainless steel gas line is designed with corrugation, which has high-level flexibility and is not easy to be damaged. Can be better used in a narrow range. Also, the corrugated gas line connector has staggered spacing every 2 inches to eliminate noise..
  • BRASS GAS SHUT OFF VALVE - The shut off valve is a great feature that allows you to directly shut off the flow instead of operating on the appliances. It is convenience for servicing appliances or summer shutdown..
  • COMPATIBLE WITH MOST GAS APPLICANTS - Our universal gas dryer installation kit is suitable for gas log, gas stove, gas dryer, wall mounted heater, garage heater, fireplace, and so on. It....
Check Stock

Slime 40069 Inflation Station, Garage Inflator, Pro-Series, Wall Mounted Air on Demand, Flat to Full in 4 Minutes, Cars, Trucks, Bicycles, 120V,Black

  • ...outdoor Natural Gas or Liquid propane applications to the gas supply piping, such as fire pit gas tube, gas range pipe, water heater gas hose,Generator gas tube,Compressor gas tube,Grill gas line.etc.
  • 【Sturdy material 】- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, Comes with a 1/2" MALE Brass fittings on both end, Standard Male and Female Pipe Threads for easy connections..
  • 【Flexible and Safety】- Corrugated Stainless Steel Tubing is flexible and can be cut into any length you need,easily snakes into attic and basements areas, around corners and bends, Using one-piece molding exquisite Craft, There is no interface in the middle of the pipe body, reducing the connection point and preventing gas leakage.Really convenient and 100% safety..
  • 【Installation】-High temperature resistance,Low pressure resistance,Explosion-proof and compressive material, it can be installed exposed to indoor light , or it can also be embedded in concrete, or behind the wall in dry wall systems as needed. also Suitable....
Check Stock

Pipe Cutter [1/8\ - 1 1/8\] Tube Cutter Tool for Copper Pipe, Stainless Steel Tubing, Metal, Plastic, Brass - Copper Pipe Cutter - Compact & Tight Space Rigid Tubing Cutter Set for Plumbing

  • HANDYMAN’S BEST FRIEND – Our tubing cutter is especially designed to assist plumbers, electricians & mechanics – whether it’s used as a screw cutter, copper cutter, steel cutter, brake line cutter or an exhaust cutter..
  • PLACE, ADJUST AND ROTATE – Cutting copper tubing has never been easier. Simply, put the tube in the slot where the blade is, adjust to the appropriate setting and rotate your tube. It’s never been this effortless to cut copper tube..
  • NOT JUST FOR COPPER – Our pipe cutting tool isn’t just a great copper tube cutter but also can also cut steel pipe, stainless steel tubing, aluminium piping, PVC and iron. However, we do not recommend cutting PVC pipe as it’s a lot more difficult to cut..
  • GREAT FOR SMALL SPACES – Looking for a fantastic copper pipe cutter for tight spaces? Look no further! Our small pipe cutter fits perfectly in restricted spaces. Our metal tube cutter is also great as an accurate arrow cutter..
  • EXTRA BLADE – Our mini pipe cutter also comes with an extra blade so you can cut as much steel tube as possible. We truly believe our Pipe Cutter is the best in the marketplace and we stand by that. If our tube cutter doesn’t cut it, we’ll FULLY REFUND YOU. So, click "Add to Cart" now and buy with confid....
Check Stock

Faucet Supply Lines Connector Stainless Steel Braided Supply Hose 3/8-Inch Female Compression Thread x M10 Male Connector, 24-Inch Long x 2 Pcs (1 Pair)

  • Standard US 1/2 "internal thread, the faucet supply line connector inlet is 3/8" compression connection to the supply stop valve, its outlet is 1/2 "female iron pipe (FIP or IPS), its total length is 11-4/5". There are 6 pieces 1/2 supply line in the package..
  • The 1/2 inch faucet supply lines external and internal are made of high quality 304 stainless steel material, rust proof and corrosion proof, not easy to break, and longer service life..
  • Thick rubber gasket with a high sealing hose, can effectively prevent leakage.The 1/2 inch sink hose is woven of high strength stainless steel to ensure maximum pressure and optimal performance. Let you always avoid the unpleasant of a broken water pipe..
  • The braided faucet line connector is easy to install, flexible hose, easy to handle, sturdy stainless steel nut, plus the hose is equipped with an ABS wrench, no other tools, direct hand tightening to complete installation..
  • The 1/2 inch toilet supply line It can be compatible with most standard size faucets. Suitable for kitchen, bathroom, toilet, washbasin, water heater, toilet, hot and cold water supply, base faucet, etc..
Check Stock

OhLectric 1 Hole 1/2 Inch Pipe Strap - Reinforced Rib For Extra Strength - Zinc-Plated Steel Pipe Strap Clamp For EMT Conduit - Snap-On Installation - Pack Of 100 OL-43022

  • PREMIUM QUALITY: Quality is our foremost priority! Constructed with galvanized steel with a rigid EMT thickness, our pipe straps are sturdy, strong....
  • EXCELLENT FIT: Are you feeling irritated at using old steel pipe straps? The solution is here to make your work easier. This strap takes less time to....
  • IDEAL CHOICE: Stands for the tests of time! Engineered with innovative foldable features, it is used in fixing pipes to various supporting structures,....
  • EASY INSTALLATION: A single hole design makes it easy for the plumber or other installer to secure pipes to any surface! You can reuse our pipe strap....
  • ACCURATE SLIDE SIZE: This wide pipe strap measures ½ inch is the perfect clamp to hold EMT and IMC conduit, metal pipe, pipe, power line or cable for....
Check Stock

Fuel Line Pliers Quick Release Remover Set, 9 inch Fuel Filter Calipers Tools for Auto Removal Fuel Filter Line & 7PCS Air Conditioning Cooling Pipe Hose Circlip Pliers Kit

  • 【Superior Quality】Fuel filter calipers is forged from high hardness carbon steel. After high-temperature smelting treatment, it is not only strong, but also durable. The metal surface is treated by the carbon black coating process with anti-oxidation treatment, so it will not become dim due to rust. The handle is made of PVC material and heated as a whole. It has a strong heat insulation effect and can provide you with comfortable grip without sliding easily..
  • 【Ergonomic Design】The design of the spring automatic rebound function of the fuel filter caliper can help you save time and effort in the operation process. Coupled with the comfortable handle and the cooperation of different sizes and angles, you can easily disassemble the vehicle fuel pipe or air conditioning cooling hose even in the dead corner where the space is narrow or difficult to work..
  • 【Easy To Use】This set of quick disassembly pliers for automobile oil pipe and air conditioning pipe has a variety of sizes, the handle is easy to grasp, and the jaw has a variety of angles such as 45º/ 90º/ 180º, allowing access to small areas that are difficult to reach. Clamp the jaw on the fuel p....
Check Stock

IZOKEE 1/4\ Inch ID Fuel Line Set - 2 Meter / 6-Foot ¼ Inch Fuel Line + 2 Pcs 1/4 Inch & 5/16 Inch Fuel Filters + 10 Pcs 2/5\ ID Hose Clamps for Kawasaki Kohler Briggs & Stratton Small Engine

  • 【Upgraded Set】The IZOKEE Package includes 6 Feet 1/4" ID Fuel Line.
  • 10 x 2/5" ID Hose Clamps. Fuel filters and hose clamps are required for the use of fuel line. You do not need to purchase those part extra. The dimensions of the various components within the kit are 100% compatible!.
  • 【3-layer thickened fuel line】The fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. Wall thickness is 2.94mm. Oil resistant, cold-resistant and ethanol tolerance. 6 Foot / 2 m hose can be cut to size for all your applications..
  • 【Fuel Filter】Filter the impurities, dirt, particles in fuel, prevent blockage of carburetor, only allows clean fuel flows in and keep engines at full power..
  • 【Hose Clamps】Made of 65Mn Spring Steel, durable and can be reused. Tight clamping force prevents liquid leakage..
  • 【Wide Application】Fits selected Briggs & Stratton, Kohler, Craftsman, Simpson, Kawasaki, Husqvarna, Oregon, Stens, Gravley, John Deere, Kubota engines that use this type filter for motorcycle, lawnmower, power equipment and small engines ect..
Check Stock

OEMTOOLS 25440 Professional Tube Bending Pliers Bends Brass Copper Steel and Aluminum Brake Lines of Diameters 5/16 3/8 3/16 and 1/4 Steel

  • BRAKE LINE BENDER: This tube bender is ideal for working on brake lines.
  • Brake line bending tool is designed to bend brass, copper, steel, and aluminum brake lines.
  • Tubing benders can make left, right, and offset bends up to 90-degree angles.
  • DUAL-SIZED ADAPTERS: The brake tube bender comes with two dual-sized adapters for different sizes of brake line diameters.
  • Pipe bender tool works on 1/4 inch, 5/16 inch, 3/16 inch, and 3/8 inch diameters of mild steel and soft tube material.
  • MINIMIZES DAMAGE: Our brake line tube bender features forged separators with knife edges to minimize damage to parts.
  • Safe soft copper tubing bender and metal tubing bender for any brake line kit.
  • Excellent tubing pliers for mild steel pipes and tubes.
  • HEAVY DUTY MATERIAL: These tubing bender pliers are made of alloy steel for additional strength and durability, ensuring these brake line forming pliers last for years to come.
  • Sturdy manual tubing bender makes the job much easier.
  • BRAKE LINE PLIERS PRODUCT SPECIFICATIONS: Size: 10.5 Inches.
  • Two Dual-sized Adapters for 5/16, 3/8, 3/16, and 1/4 Inch Brake Line Diameters.
  • Left, Right, and Offset Bends Up to 90-degree Angles.
Check Stock