Reviews Lexus Motor Oil

700215 AC Heater Blower Motor with Fan Cage Compatible with Toyota Camry, Highlander, Tundra, 4Runner, Avalon, Venza- Lexus ES350,ES300h,GX460,RX350,RX450h- Dodge Journey, Replaces# 75830 87103-0E040

  • 【Compatibility】This HVAC Heater Blower Motor Replacement for 2005-2018 Toyota Avalon | 2007-2017 Toyota Camry | 2007-2020 Toyota Tundra | 2008-2019 Toyota Highlander | 2010-2020 Toyota 4Runner | 2010-2016 Toyota Venza | 2007-2018 Lexus ES350 | 2010-2012 Lexus RX350 | 2010-2012 Lexus RX450h | 2013 Lexus ES300h | 2010-2019 Lexus GX460 | 2014-2020 Dodge Journey.【NOTE】Please check the description or use the year/make/model drop down bar and interchangeable part numbers to confirm the compatibility before purchase this Blower Motor..
  • 【Replaces Part#】This AC Blower Motor with Fan Cage Replaces 700215, 68232372AC, 87103-0E040, 87103-0C040, 87103-60400, PM9351, 75830 for Toyota, Lexus & Dodge vehicle..
  • 【OEM FIT & EASY INSTALLATION】Direct replacement for your factory Blower Motor Fan Assembly .The blower motor can be installed easily with no special tools required and just by removing a few screws on the passenger side of the vehicle under the glove box.This blowers motor will get your air conditioning system up and running again in no time.While this is not a genuine OEM part it is a direct replacement..
Check Stock

Oil Filter Housing Cap Assembly 15620-31060 for Toyota Tundra RAV4 4Runner Camry Highlander Tacoma Avalon Sienna Venza Lexus RX350 Replace 1562031060 15643-31050 Oil Filter Housing Caps with Oil Plug

  • REPLACeMENT OIL FILTER HOUSING CAP ASSEMBLY WITH OIL PLUG - Driving anywhere depends on smooth and efficient operation of Engine System, especially the Oil Filter Assembly. An impacted, cracked or warped oil filter housing may cause engine oil leak. Therefore, replacing the worn or broken oil filter housing regularly during a routine oil change is important to maintain the top condition for your Toyota or Lexus Vehicle..
  • FITS THE FOLLOWING VEHICLES - For 2010-2019 Toyota 4Runner, 2005, 2019 Toyota Avalon, 2007-2019 Toyota Camry, 2010-2014 Toyota Fj Cruiser, 2008-2019 Toyota Highlander, 2006-2019 Toyota RAV4, 2006-2019 Toyota Sienna, 2016-2019 Toyota Tacoma, 2007-2019 Toyota Tundra, 2009-2016 Toyota Venza.
  • 2013-2016 Lexus ES300h, 2007-2018 Lexus ES350, 2007-2017 Lexus LS460, 2006 Lexus RX330, 2007-2015 Lexus RX350, 2010-2015 Lexus RX450h. Please check the Fitment and Part Number before ordering, Thanks.
Check Stock

Motivx Tools Automotive Engine Oil Funnel for BMW and VW Vehicles

  • Perfect fit for all BMW and Volkswagen vehicles that use half turn oil filler caps. Without the adapter installed it also fits Toyota and Lexus....
  • Auto engine no spill oil funnel attaches directly to the oil fill port in place of the cap.
  • The funnel seals to your car motor just like the factory cap to avoid spills.
  • The spillfree funnel doesn't need to be held leaving you with both hands to open oil bottles and refill the engine.
Check Stock

X AUTOHAUX Car Plug Oil Engine Filter Housing Cap Cover for Toyota Camry RAV4 Avalon for Lexus Automotive Accessories 15643-31050

  • [Fitment] Fit for Toyota 4Runner 2011-2015, for Toyota Avalon 2005-2015, for Toyota Camry 2007-2015, for Lexus ES300H 2013-2015, for Lexus ES350 2007-2015, for Lexus GS300 2006, for Lexus GS350 2007-2015, for Lexus GS460 2008-2011,for Lexus LS600H 2008-2016, for Lexus LX570 2008-2016, for Lexus RX350 2007-2015, for Lexus RX450H 2010-2015, for Scion IQ 2012-2013, for Scion TC 2011-2013..
  • [OE Number] Manufacturer Part Number: 15643-31050, Other Part Number: 1564331050..
  • [Material] Oil filter cap is made of metal, strict quality control standards to build and test. According to the original factory specifications. Design improved for more durability, stable and updated characteristics, high reliability..
  • [Good Replacement] The oil filter cap housing perfect match for the original car. Please verify Fit for or application, check your car model, make, year before your payment..
  • [Easy To Installnation] Easy to install, no need special tools to install..
Check Stock

Caldera Oil Filter Wrench For 1.8Liter Toyota, Lexus, and Scion Vehicles - Compatible with 64mm Oil Filter Cartridges and Caps On Corolla, Prius, Matrix, CT200h, iQ, and XD

  • This 64mm oil filter wrench fits Toyota, Lexus, and Scion vehicles with 1.8 liter engines and cartridge style oil filters.
  • Compatible with Toyota Corolla, Prius, Prius V, Matrix, Scion iQ, xD, and the Lexus CT200h.
  • Crafted from high strength aluminum, this oil filter wrench is designed to withstand high amounts of torque when removing tough oil filter caps.
  • The 14 flute design of this oil filter tool ensures a tight no-play, non-slip grip on 64mm Toyota, Lexus, and Scion oil filter housings.
  • The 1.8 liter oil filter wrench can be used with both a 3/8 inch drive ratchet and a 27mm socket. Use 3/8 inch drive for tightening, and 27mm socket for loosening.
Check Stock

ABN 64mm Cartridge Oil Filter Wrench for 2.5-5.7L 6-8 Cyl, Compatible with Camry, RAV4, Tundra, Toyota, Lexus, and More

  • Wide Use: The ABN Toyota / Lexus 6 – 8 Cylinder Oil Filter Wrench has a 3/8-inch Drive and 1/2-inch Hex.
  • Is compatible with Toyota and Lexus vehicles with 6 - 8 Cylinders: All Toyota or Lexus 6 – 8 cylinder vehicles with cartridge-style engine oil filter housing (see full product description below for fitment).
  • Durable: Constructed with forged alloy, this oil filter wrench is designed for maximum torque.
  • Specifications: 24 millimeters x 64.5 millimeters with 14 flutes.
  • Easy Removal: Multiple contact points engage the housing cap securely.
Check Stock

X AUTOHAUX Black Car Oil Engine Filter Housing Cap Cover Assembly 15620-36020 for Toyota Avalon Camry Highlander RAV4 for Lexus IS250 IS350 GS200t GS350 GS450h RX350

  • [OE Number] Manufacturer Part Number: 15620-36020, Other Part Number: 1562036020..
  • [Material] Oil filter cap is made of plastic and metal, strict quality control standards to build and test. According to the original factory specifications. Design improved for more durability, stable and updated characteristics, high reliability..
  • [Good Replacement] The oil filter cap housing perfect match for the original car. Please verify Fit for or application, check your car model, make, year before your payment..
  • [Easy To Installnation] Easy to install, no need special tools to install..
Check Stock

12 Packs 90430-12031 Toyota Oil Drain Plug Gaskets Compatible with Toyota Tacoma Tundra Camry Corolla 4Runner Scion Avalon Lexus Oil Plug Gasket (12) (12) (12)

  • Part Number: Replaces 90430-1203, 9043012031 Inside diameter: 0.48 inch, Outside diameter: 0.82 inch, Thickness: 0.07inch.
  • Direct replacement: Used for oil drain plug on Scion Lexus Toyota Crush Washer Seals.
  • Trustworthy quality: The toyota oil drain plug gasket fits the oil drain plug perfectly and works well to keep the drain plug tight and free from leaks, easy to replace old broken toyota drain plug gasket with this exact copy..
  • The oil drain plug gasket located at the bottom of the oil pan helps keep oil from leaking around the oil drain plug. These gaskets are usually a single-use item and should be replaced with each oil change..
  • 20 Year Warranty: If have any quality issue, we would like to issue refund or arrange reshipment within 20 years. Excellent service and superior lexus drain plug gasket toyota.
Check Stock

Motivx Tools Oil Filter Wrench, Drain Tool, and Advanced Engine Oil Funnel Set for Toyota & Lexus 2.0L - 5.7L Engines With Cartridge Style Oil Filter Systems

  • This is a bundle package containing the Motivx Tools MX2320 cartridge style oil filter wrench, MX2341 oil filter drain tool, and MX2301 threaded oil funnel for Toyota and Lexus vehicles..
  • These tools only fit 2.0L to 5.7L engines that use the cartridge style oil filter system. They do NOT work on engines that use standard spin-off style oil filters. The drain tool is not compatible with some 2wd Lexus vehicles..
  • Works on many late model Sienna, Tundra, Highlander, Camry, RAV4, Tacoma, Sequoia, Avalon, Corolla, FJ Cruiser and Venza Toyota vehicles..
  • Includes a Toyota oil filter wrench for removing the oil filter housing cap, a oil filter drain tool for draining the filter housing before removing, and a hands-free Toyota threaded drain funnel for refilling the engine with oil..
  • High quality forged wrench is included for quick and and easy removal of over-tightened canister filters on many late model Toyota vehicles..
Check Stock

90430-12031 Oil Drain Plug Gaskets Qiilu 50pcs Engine Oil Drain Plug Gaskets Crush Washer Oil Drain Plug for Toyota for Lexus Metal Aluminium Alloy OEM Parts Replacement

  • Fitment---- Oil Drain Plug Gasket Kit is suitable for Toyota 4Runner 1990-2016, for Toyota Camry 1989-2016, for Toyota Corolla 1985-2016, for Scion iQ 2012-2015, for Lexus CT200h 2011-2016, for Lexus GS300 1993-2006, etc.. More adapter models are displayed in Specification.
  • Reference OEM---- Replacing OE number: 90430-12031. According to the original factory specifications, which is an ideal OEM replacement with the same form, fit and function as the OEM original part. Comes as 50 pieces, economical and practical.
  • High Quality Material---- The engine oil drain plug gasket is made of high-quality aluminum alloy material, which is wear-resistant and durable, not easy to break and has long service life. The manufacture of the oil drain plug gasket meets the strict quality requirements.
  • Seal Installation---- Seal the oil drain plug on the oil pan to prevent oil leakage, otherwise your engine environment will be damaged. Install this gasket to ensure that the oil drain plug is properly sealed on the oil pan.
  • Practical Accessory---- Ensure that the drain plug is not tightened too tightly and jams, thus damaging the drain plug and the oil pan thread. Proper fit with the drain plug ensures a tight seals. Our crush washer oil drain plugs are snug and flush, provi....
Check Stock

Heavy Duty Oil Filter Wrench For Toyota, Lexus, Scion 1.8 Liter Engines - Durable Cup Style Oil Filter Removal Socket Tool Fits Prius, Prius V, Corolla, Matrix, CT200h, iM, iQ, xD

  • PERFECT FIT FOR 1.8L ENGINES WITH CARTRIDGE STYLE OIL FILTER SYSTEMS – This 64mm 14 flute oil filter wrench fits for Toyota, Lexus, and Scion vehicles equipped with a 1.8L 4-cylinder engine that uses the newer cartridge style oil filter system. This tool does not work on vehicles with traditional canister filters that you unscrew and throw away..
  • BUILT TOUGH TO REMOVE OVERTIGHTENED OIL FILTER HOUSINGS WITHOUT BREAKING - Oil filter housing caps can be extremely tightened causing tremendous pressure to be put on the wrench. Our oil filter wrenches are forged from high quality 6065 aluminum alloy, so they won't crack like cheaper cast aluminum or flex and damage the plastic cap like stamped steel versions..
  • WON'T DAMAGE YOUR OIL FILTER HOUSING CAP BY SLIPPING - Our oil filter wrenches are perfectly sized with added contact area to allow for easy installation and a fit that won't slip..
  • EASILY RELEASES FROM THE CAP WITHOUT GETTING STUCK – Some oil filter wrenches are very difficult to release from the cap requiring additional time and frustration of prying it off. Ours are constructed and finished in a way that eliminates t....
Check Stock

Sunroof Repair Kit for Lexus Cars and Suvs New

  • Sunroof Ribbon Cable Set with Lift Arms : Includes Left and Right Side.
  • Made for Lexus GS 300 2006 , Made for Lexus GS 350 2007 - 2011 , Made for Lexus GS 430 2006 - 2007 , Made for Lexus GS 450h 2007 - 2011 , Made for Lexus GS 460 2008 - 2011.
  • Made for Lexus RX330 2004 - 2006 , Made for Lexus RX350 2007 - 2015 , Made for Lexus RX400h 2006-2008 , Made for Lexus RX450h 2010 - 2015.
  • Made for Lexus IS F 2008 - 2014 , Made for Lexus IS250 IS350 2006 - 2013 , Made for Lexus HS250h 2010 - 2012.
Check Stock

MOSTPLUS Complete Power Steering Rack Pinion Assembly Compatible with 2006-2020 Toyota Camry Acv4*/LEXUS ES300 ES330 ES350 2002-2012

  • 【Compatible vehicles】— Compatible with 2006-2020 Toyota Camry Acv4*；Compatible with TOYOTA AVALON 2005 - 2012 All Models.
  • Compatible with LEXUS ES300 2002 - 2003 All Models.
  • Compatible with LEXUS ES330 2004 - 2006 All Models.
  • Compatible with LEXUS ES350 2007 - 2012 All Models.
  • 【OE Part Number】— 44250-06270,44200-06320.
  • 【Function】—Changing rotational motion into linear motion, no noise, no oil leakage, help the driver to steer easily, safer and more stable driving by increasing the strength of the steering wheel..
  • 【Features】—Decrease turning resistance obviously to improve the portability of steering.
  • Reduce the impact of bad road conditions to improve driving safety.With the premium iron and aluminum, has excellent rust and corrosion resistance,extend service life..
  • 【NOTE】— Please check fitment before purchase..
Check Stock