Reviews Leg Leveler Plate

34 1/2' Hafele Table Legs Set of 4, Steel, Black

  • Leg screws into the steel square mounting plate with an M10 bolt.
  • Plastic levelers are pressed-in, they can be removed and pounded back in if legs need to be cut.
  • 220 lbs per leg (100 kg) Static load bearing capacity.
  • 34 1/2" High, including the mounting plate and the leveler.
Check Stock

Little Giant Ladder Systems 12106 Leg Leveler

  • Fits Revolution, Xtreme and Velocity Little Giant Ladders.
  • Attach the leveler for 11 inches of extra length on any side of the ladder.
  • Fasten the Leg Leveler to your Little Giant ladder in the A-frame configurations for tight uneven surfaces with even more comfort and stability.
  • The Little Giant Leg Leveler exceeds all OSHA and ANSI standards and is rated to hold up to 300-Pound.
  • Use the Leg Leveler for especially hard-to-reach jobs, particularly those above sloping ground, stairs, uneven surfaces, and other obstacles.
Check Stock

Rok Hardware 4 Pack Heavy Duty 8000 LB Capacity Adjustable Furniture Leg Leveler

  • Holds Up to 8000 Lbs Made of heavy duty steel with a 2000 Lb capacity Per leg leveler.
  • Rok Brand is sold exclusively by Rok Hardware. When you purchase a Rok Brand product, your satisfaction is guaranteed. The Rok name is a registered trademark of Rok, Inc.
Check Stock

Adjustable Feet Levelers, Heavy Duty Adjustable Legs for Furniture, Large Furniture Levelers, T Nut Levelers Table Adjustable Feet 3/8-16 Thread (8 Pack, Black)

  • {Wide Application}: The leveling feet adjustable can be used on any furniture leg to help it level the same height, such as tables, chairs, kitchen cabinets, and sofas. No matter at home or workplace that needs to be leveled or adjusted, it can be quickly solved by this furniture leveler..
  • {Flexible Adjustment}: The heavy-duty furniture leg levelers help to adjust the height of the furniture without affecting the appearance, so as to adjust the balance or increase the height. Diameter 1/2” Thick Base and Fully Adjustable Height from 3/4” to 1 3/4” for Maximum Support and Adjustability. The 3mm thickness felt pad with heavy-duty self-adhesive perfectly protects the floor..
  • {Clever Installation}: First drill a hole with a width of 0.55 inches, use a hammer to hammer in the inserted t-nut, and then screw the leg leveler to the desired position to complete the adjustment. And for furniture legs with existing 3/8"-16 thread, simply screw in the leg leveler to adjust the height..
  • {Package Included}: 8 × T- Nut Kit, 3/8”-16 Thread. 8 × 0.1'' thickness Felt Pads. adjustable furniture feet.
Check Stock

Artilife 8Pack Heavy Duty Furniture Leveler Legs 2 Inch Height Adjustable Feet and Hexagon Nuts Lock for Furniture, Cabinets, Workbench

  • 【L-Shaped Mounting Bracket】 Ensures the cabinet load is carried by the leveler, Not the screws. The leg leveler has 7/16” wide ledger,allows the mounting bracelet hooks onto the bottom edge of furniture for better support and stability..
  • 【Heavy Duty】Adjustable leg is made of galvanized iron furniture legs that help you adjust and level your table, cabinets, workbench, shelving units, bookcase and more..
  • 【Versatile Threaded Legs】 The leveling feet have heavy 3/8"-16 (10mm) dia shaft that adjusts height from 0" to 2-1/2". Free spinning foot design compensates for uneven/ irregular floors..
  • 【Widely Use】Heavy duty leveling feet is perfect for leveling applications, balance - adjustments to table, cabinets, workbench, shelving units, bookcase and more..
  • 【Package Included】8 x Leveler Legs, 32 x Screws, 8 x Locknuts, 2 x Hex Wrench..
Check Stock

Antrader 4-Pack Minimalist Design Furniture Feet Metal Sofa Cupboard Cabinet Leg Replacement Parts, Black

  • 【Package Includes】- The leg leveler kit includes 8pcs leg levelers, 32 screws, 2 allen wrenches and 2 nut wrenches. It is the best way to quickly and easily fixing the level of all types of furniture..
  • 【Adjustable Leveling Feet】- The adjustable height is 0-2 inches, which can meet your various needs. In addition, the base with a plastic protective cover can protect the floor and prevent moisture from entering the feet..
  • 【Premium Quality】- Our heavy duty furniture leg leveler is made of 2mm galvanized steel, which is rust-proof and durable. Each one can support 330 lbs, and 8 leg levelers can support a total of 2640 lbs..
  • 【Easy to Install】 - You can use the screws to install the leg levelers in a few minutes, and the allen wrench and nut wrench helps to adjust the height effortlessly..
  • 【Wide Application】- It is widely used for leveling heavy furniture, suitable for shelving units, cabinets, furniture feet, workbenches, cabinets, beds and bookcases, and can also be used outdoors..
Check Stock

Heavy Duty Adjustable Furniture Leg Leveler w/Lock Hexagon Nuts - 2000 Lbs(Set of 4)

  • Heavy duty-Set of four levelers can holds Up to 2000 Lbs. Leveler Total Height: 3 Inches.Leg Base Diameter: 1-1/4 Inches.2 Inches Height Adjustable..
  • Free spinning foot - inner hexagon spanner for adjust ,Compensates for irregular floors. base with plastic protective cap can protects floors and block any moisture from getting to the foot. No more rust spots left on the floor surface..
  • Multipurpose-It is good for tables, shelving units, cabinets, furniture legs and a whole lot more.And also can be used for outside furniture and perfect for the workshop or garage, especially if vibrating machinery is involved..
  • Easy to adjust- adjust with the included-inner Hex Key Wrench. The unique design of the leg leveler allows for easier access to the adjustment bolt. This will be allows to micro adjust each leg until they are perfectly level to your desired height..
  • You can get 4 Heavy Duty Leg levelers w/lock nuts, 32 Installation screws, one 5mm inner hexagon spanner..
Check Stock

POPMOON Ladder Accessories 600C Ladder Leveler One Pair，Available for Home Ladder Extender Leg, Leveling Leg.

  • LADDER ACCESSORIES 600C Ladder Leveler Pair adjustable leveling feet ..
  • Ladder Leveler Kit ,Building Materials & Ladders, Ladder Extension Accessories,Extender Feet..
  • Ladder Leveling Tool ，The Bottom is Made Of Silicone Pad, Non-slip, Wear-resistant and Durable.Ladder Scaffold Brackets，Screw structure is Safer, more Stable and Reliable.
  • Extension Ladder Leg Leveler For Use Not only on firm surfaces,but also use on slippery surfaces..
  • During the adjustment process, it is not automatically adjusted. It needs to be manually screwed and adjusted to a fixed position before it can be used. (Require customers to read the use requirements carefully, and purchase.).
Check Stock

Lock Jaw Ladder Grip, (1 single unit) Ladder Stabilizer, Fits on Gutters in Seconds, Slide Lock, Rolling Safety Device, Ladder Gutter Clip

  • TOUGHER ladder leveler is made of high-quality alloy steel, which is firm and durable. The ladder foot is removable and replaceable, made of natural rubber, which maximizes the friction between the ladder and the ground, anti-skid and wear-resistant..
  • TOUGHER ladder leveler is compatible with all types of II, I and IA extension ladders up to 32 feet long. The stronger ladder leveler has a total length of 20 inches, a maximum extension of 10.5 inches, a maximum load of 500Lbs, and its own weight is only 3 Lbs / piece..
  • TOUGHER ladder levelers have upgraded the pole to full thread, thus maximizing the friction in the locking system, therefore increasing safety margins compared with other brands..
  • Installation only requires a drill. After installation, the leveler can be adjusted as required. Simply press the locking plate and move the lever up or down. Through adjustment, the ladder leveler can be more stable and safe, which is critical for safe work on stairs and uneven surfaces..
  • TOUGHER ladder levelers can work on stable platforms on all surfaces. Whether indoor or outdoor, cement or ceramic tile, it is a good choice for ladder leveling tools. It can be used on uneven ground, stairs and other similar environments..
Check Stock

Adjustable Furniture Levelers Screw Stainless Steel Screw Leveling Feet 1/4' Threaded Screw Table Levelers Chair Levelers Furniture Feet for Table Chair Cabinet Patio Furniture Legs-12 Packs

  • [Stainless Steel Furniture Leveler Screw] Made of real stainless steel,this 1/4 inches-20 UNC threaded screw is anti-rust and anti-corrosion, offering you a long servie life.Widely used in furniture table, chair,cabinets,washing machine base,bathroom cabinets,outdoor patio furniture and more.[This is a small screw leveler, please check before you purchase!].
  • [Standard Size] This stainless steel 1/4 Inches-20 UNC thread furniture feet screw has a shaft that is 3/4"(0.75 inches) long. The diameter of the nylon base is 0.6 inches.(1/4"-20 UNC thread is a common size for American made furniture. If you are unsure about your furniture size,you can ask local hardware store to help you identify the correct replacement size.).
  • [Easy To Use] Simply screw in the leg leveler to adjust the height.Or pre-drill a 1/4" hole,screw in the levelers and adjust to the desired height.This furniture leg screw can adjust tables and chairs easily to keep balance,keep your furniture and floors from being scratched and damaged, reduce noise while moving furniture..
  • [Strong Protective Base] These furniture leveling feet have a non marking nylon base with special anti-slip design for easier & more accurate height adjustment. They will not leave marks on your floor surface..
Check Stock

Anwenk Leveling Feet Heavy Duty Furniture Levelers Adjustable Table Leg Leveler w/Lock Nuts for Furniture,Table, Cabinets, Workbench,Shelving Units and More

  • ✔Heavy Duty Leveling Feet- These are 4 heavy gauge, plated steel furniture legs that help you adjust and level your table, cabinets, workbench, shelving units, bookcase and more..
  • ✔Versatile Threaded Legs- The leveling feet have heavy 3/8"-16 (10mm) dia shaft that adjusts height from 0" to 2-1/2". Free spinning foot design compensates for uneven/ irregular floors. Polyethylene cap protects floors and block moisture from getting to the foot..
  • ✔ L-Shaped Mounting Bracket- Ensures the cabinet load is carried by the leveler, Not the screws. The leg leveler has 7/16” wide ledger,allows the mounting bracelet hooks onto the bottom edge of furniture for better support and stability..
  • ✔1320LBs Weight Support- Each leveling leg support 330LBs, 4 legs support total 1320LBs. These heavy duty leg levelers hold up almost all heavy furniture you may have,without worrying about its quality..
  • ✔Hex Wrench for Easy Adjustment- 5mm hex wrench is included to allow micro adjustment on each leg until they are perfectly level to your desired height.Package includes 4x leveling feet, 16 Installation screws , 5mm hex wrench..
Check Stock

Leg Leveler, 4/8/16 Pack Leveling Feet, Heavy Duty Adjustable Furniture Leveler Legs, with Screws, Lock Nuts and Wrench, 2 inch Adjustable Height, for Furniture, Table, Cabinets and Workbench

  • 【Package Includes】- The leg leveler kit includes 16pcs leg levelers, 64 screws, 2 allen wrenches and 2 nut wrenches. It is the best way to quickly and easily fixing the level of all types of furniture..
  • 【Adjustable Leveling Feet】- The adjustable height is 0-2 inches, which can meet your various needs. In addition, the base with a plastic protective cover can protect the floor and prevent moisture from entering the feet.
  • 【Premium Quality】- Our heavy duty furniture leg leveler is made of 2mm galvanized steel, which is rust-proof and durable. Each one can support 330 lbs..
  • 【Easy to Install】 - You can use the screws to install the leg levelers in a few minutes, and the allen wrench and nut wrench helps to adjust the height effortlessly..
  • 【Wide Application】- It is widely used for leveling heavy furniture, suitable for shelving units, cabinets, furniture feet, workbenches, cabinets, beds and bookcases, and can also be used outdoors..
Check Stock

Anwenk Leveling Feet Heavy Duty Furniture Levelers Adjustable Table Leg Leveler w/Lock Nuts for Furniture,Table, Cabinets, Workbench,Shelving Units and More,Black

  • 【Heavy Duty Leveling Feet】- These are 4 heavy gauge, plated steel furniture legs that help you adjust and level your table, cabinets, workbench, shelving units, bookcase and more..
  • 【Versatile Threaded Legs】- The leveling feet have heavy 3/8"-16 (10mm) dia shaft that adjusts height from 0" to 2-1/2". Free spinning foot design compensates for uneven/ irregular floors. Polyethylene cap protects floors and block moisture from getting to the foot..
  • 【L-Shaped Mounting Bracket】- Ensures the cabinet load is carried by the leveler, Not the screws. The leg leveler has 7/16” wide ledger,allows the mounting bracelet hooks onto the bottom edge of furniture for better support and stability..
  • 【1320LBs Weight Support】- Each leveling leg support 330LBs, 4 legs support total 1320LBs. These heavy duty leg levelers hold up almost all heavy furniture you may have,without worrying about its quality..
  • 【Hex Wrench for Easy Adjustment】- 5mm hex wrench is included to allow micro adjustment on each leg until they are perfectly level to your desired height.Package includes 4x leveling feet, 16 Installation screws , 5mm hex wrench..
Check Stock