Reviews Led Display Driver

LED Driver 100 Watts 24V DC Low Voltage Transformer, Waterproof IP67 LED Power Supply, Adapter with 3-Prong Plug 3.3 Feet Cable for Any 24V DC led Lights, Computer Project, Outdoor Light

  • LOW VOLTAGE TRANSFORMER: LED Driver Power Supply 12V, 36 Watt, Input: AC100-240V, Output: DC 12V, Size: 4.92*1.38*0.91 inches, IP20 Waterproof..
  • GOOD HEAT DISSPATION: The Constant Voltage LED Driver is made of heat-resistant material and it also has overheating protection device inside. Easy for heat dissipation and ensure stability..
  • SAFER DESIGN: 120V to 12V Transformer is flicker-free output, thermal overload, over current, over voltage and short circuit protection built in. No noise isolation protection safety..
  • WIDE APPLICATION: 36W LED Driver can be applied to all kinds of LED devices, such as LED light strips, LED hard light strips, cabinet light, LED display, security camera, LED module, indoor LED deck light, puck light, rigid strip light, G4 bulb, MR11 bulb, MR16 bulb ect..
  • NOTE: Please confirm the input voltage (AC100-240V) can work in your place before purchase the 12V LED Switching Power Supply, and please make sure the power is not over 36W, otherwise it may burn..
Check Stock

DC 12V LED Power Supply Driver Transformer - Lustaled 15W Waterproof IP67 120VAC to 12V DC Converter Constant Voltage LED Switching Power Supply for LED Strip Lights, G4 MR11 MR16 LED Display (2-Pack)

  • [DC 12V LED Power Supply]: Mini size 15W LED driver transformer, Input: AC100-265V, Output: DC 12V.
  • [Wide Application]: Our 15W LED power supply driver is suitable for most of devices with DC12V such as CCTV, Illuminated Module Signboard, Cabinet Lights, LED Strip Lights, LED Display, LED Module, Indoor/Outdoor Deck Lights, Indoor Stair Step Lights, LED Light Bulbs like G4, MR11, MR16 LED bulbs..
  • [Good Heat Dissipation]: LED 12V transformer is made of aluminum, easy for heat dissipation and ensure stability. 100% Waterproof IP67 protect for outdoor use.
  • [Safer Design]: This DC 12V LED driver is flicker-free output, thermal overload, over current, over voltage and short circuit protection built in.
  • [Note]: Please confirm whether the input voltage (AC100-265V) can work in your place before purchase the 12V switching converter, please make sure the power is lower than or equal to the rated power supply, otherwise it may burn..
Check Stock

Basic 16x2 Character LCD - RGB Backlight 5V

  • DRIVER IC: The module driver IC is for AIP650 (compatible for TM650), as well as supports multiple display characters..
  • 4 DIGIT 7 SEGMENT: The digital tube display module is designed for 4 digit 7 segment, with stable and reliable performance..
  • CONTROL INTERFACE: With 4 pins, SDA is bidirectional data line, SCL is clock line, GND is for ground line, and VCC is power supply..
  • COMPACT STRUCTURE: The LED digital tube module is exquisite and compact, which can be flexibly used in a variety of situations..
  • WIDE APPLICATION: This module is suitable for Raspberry Pi 3 B+ 4, for DIY electronic devices, toy cars and instrumentation etc..
Check Stock

HiLetgo 2pcs 0.36\ 4-Digit Tube LED Segment Display Module Red Common Anode TM1637 Drive Chip Tube Clock Display for Arduino UNO R3

  • 4-digit LED display module with LED brightness adjustable and clock point..
  • Display device is a total of 4 red LED word tube. Digital tube 8 grayscale adjustable..
  • The driver IC is TM1637, only two signal lines can make MCU control four Digit 8-segment LED. Can be used to display decimal, letters and so on..
  • Control interface: a total of 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin..
Check Stock

MEGA 2560 Starter Kit Ultra (100% Arduino IDE Compatible) w/ Battery Holder, Sensors, Modules, Resistor kit and Components (no Supply)

  • ...Sensor HC-SR501 -Distance measurement module HCSR04 -Sound sensor detector module with programmable threshold -LM35 temperature sensor -Tilt detector module -Servo SG90 motor -Stepper motor (5V) -Motor driver module for stepper motor ULN2003.
  • 5V Active Buzzer -5V Passive Buzzer -LCD 1602 16 characters * 2 lines -LED Display Driver MAX7219 -LED Matrix Display of 8*8 -7 Segments Display 1 digit -7 Segments Display 4 digits -Simple Relay Module - Infrared Remote Control 38kHz - 38kHz Infrared decoder receiver (type 1838) - Infrared phototransistor (Flame sensor) - Infrared LED - Light sensor (Photoresistor).
  • -10 * LEDs 5mm Diffused RED -10 * LEDs 5mm Diffused GREEN -10 * LEDs 5mm Diffused YELLOW -5 * LEDs 5mm Ultrabright WHITE diffused -3 * LEDs 5mm Red / Green / Blue Diffused RGB -Shift Register (Series to Parallel IC) 74HC595 - NPN Transistor BC547 - PNP Transistor BC557 - Adjustable Knob Resistor 1kOhm (Potentiometer) - Adjustable Knob Resistor 10kOhm (Potentiometer).
  • - Resistor Pack 1/4W 1% accuracy, with 10pz of each value: 100, 220, 330, 470, 1K, 2K2, 4k7, 10K, 22K, 47K, 100K, 220K, 1M - 40-pin header 2.54 mm -40-pin header at right angle 2.54mm -5 * Capacitors for bypass tantalum 0.1uF -5 * Jumpers for header.
Check Stock

Key Display for AVR 8-Bit Digital LED Tube 8-Bit TM1638 Module

  • DRIVER IC: The module driver IC is for AIP650 (compatible for TM650), as well as supports multiple display characters..
  • 4 DIGIT 7 SEGMENT: The digital tube display module is designed for 4 digit 7 segment, with stable and reliable performance..
  • CONTROL INTERFACE: With 4 pins, SDA is bidirectional data line, SCL is clock line, GND is for ground line, and VCC is power supply..
  • COMPACT STRUCTURE: The LED digital tube module is exquisite and compact, which can be flexibly used in a variety of situations..
  • WIDE APPLICATION: This module is suitable for 3 B+ 4, for DIY electronic devices, toy cars and instrumentation etc..
Check Stock

ALAMSCN LED Display Module TM1637 0.36'' 4-Digit 7 Segment 4 Bits Red Digital Tube for Arduino Driver Board (Pack of 4)

  • 4-digit LED display module, red highlights, with adjustable LED brightness and clock point, can display decimals, letters, etc..
  • The driver IC is TM1637, compatible with Arduino..
  • The digital display tube can be controlled with only two signal lines, simple and easy to use..
  • Control interface: a total of 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin..
  • 4 M2 screw holes, easy to install, locate and combine modules..
Check Stock

1/18 Scale Model Car Display Case - 1:18 Car Garage Display Case with Clear Acrylic Cover and LED Lighting for Die-Cast Cars, 1 Parking Route 66-Right

  • 【Realistic Garage Scene】The back panel, side panel , ceiling and floor are printed by UV laser. Clearly printed details help to create realistic scenes..
  • 【Lighted Display Case】The ceiling mounted LED light can light up entire display case. Package comes with LED driver and USB cable for the light..
  • 【Stackable and Combinable】The wooden structure is made of 10mm solid medium density fiberboard. Sturdy and good stability allows stacked display. The left and right side garage can be combined into a two parking garage..
  • 【Dimensions】This model car display case is designed for 1/18 scale die-cast car and can hold 1 car. Exterior size:14.2" X 8.9" X 7.1". Inner size: 13.2" X 7.1" X 6.3". Note: model car is not included in this display case..
  • 【Dustproof and Clear Acrylic Cover】We choose premium acrylic material in 95% transmittance to make the model car display case, in order to show your favorite scale cars more clearly while protect them from dust and corrosion..
Check Stock

Snapdragon Wireless_Headphones_Bluetooth_5.0_with_Charging_Box_Earphones_In_Ear_Stereo_With_Microphone_Sports_Waterproof_Headsets

  • 【Stereo sound quality】Earbuds' 8mm large-size speaker driver (the drive area is 1.77 times the normal drive area), strong bass (minimum 16Hz),....
  • 【Cool led display】The audifonos bluetooth LED display will clearly display the power of the charging box and earphones, allowing you to better....
  • 【Chip upgrade】Upgrade 5.0 Bluetooth chip, automatically power on and match when picked up. CVC 8.0 intelligent noise reduction, not affected by....
  • 【IPX8 waterproof】Earbuds and charging case inner Nano-coating makes it possible to waterproof for 1 meters deep for 30 minutes. Waterproof and....
  • 【After-sales service】 If you are not satisfied with our products, or if there is a problem with the product, you can choose to return it for 7....
Check Stock

AITRIP 3pcs Multi-Function Shield ProtoShield Multi-Functional Expansion Board Sensor Shield Module with Four Digital Display Compatible with Arduino

  • 4 LED lights (LED indicator to know the importance of doing in the actual project, with this indicator can work directly with the program status indicators for easy debugging..
  • AITRIP 3pcs Multi-Function Shield ProtoShield Multi-Functional Expansion Board Sensor Shield Module with Four Digital Display Compatible with Arduino.
  • Four digital (using 74HC595 driver provincial IO learning SPI), you can do digital display test (can display temperature, voltage, counter value, etc.)..
  • Expansion board directly connected with LD3320 non-specific voice recognition module, you can achieve voice control..
  • Expansion board directly with the SG90, MG945 MG995 and other steering gear connected to achieve the robot and other complex actions..
  • Expansion board directly with the SYN6288 free voice module docking,it can achieve voice broadcast function..
Check Stock

Universal HUD 5.5in Head Up Display Speed Smart Gauge ODB2 System Car Accessories HUD Display Speedometer

  • [Ultra HD Display] The 5.5inch screen display helps you to clearly view important data. Give you the exact status of your car and be safer when you drive! Large 5.5inch color screen, very clear for the driver.
Check Stock

AUXITO Upgraded 9007/HB5 LED Bulbs Dual Hi/Lo Beam, 100W 20000LM 6000K White, Canbus Ready Wireless HB5 9007 LED Conversion Kit, Pack of 2

  • ...nect the plug, and you are done, you can start enjoying the amazing bright journey.
  • 99% Vehicles Compatible: Built-in intelligent IC driver and high wattage close to stock bulbs make 9007 bulb more compatible. Works well with 99% of vehicles’ systems. But for few vehicles, computer system may be sensitive and will display an error message or flicker for any aftermarket bulbs. To solve the issue, an additional decoder is needed, you can contact us through Amazon Buyer Message to get help and solutions.
Check Stock

AIBOO LED Under Cabinet lighting Kit, Plug in Strip Lights with Dimmer Switch for Kitchen Cabinet Counter, Closet, bedroom lighting.(24w-8 bars kit-6000K)

  • @DIMMABLE: led light bar has In-line switch on the LED driver cable helps turn on/off cabinet strip lights bar easily. The under cabinet lights could be dimmable from 0% to 100% as well, just rotate the LED dimmer switch achieve it..
  • @Mounted on anywhere: 12V dimmable LED light Bar could be attached on anywhere for the kitchen, closet, shelf or display counter lighting, no worry the outlet is in the center of the counter, the 2 in 1 splitter assist the cabinet light bar kit split into two..
  • @Premium Cabinet Light Fixture Kit: High quality certified adapter with US standard plug, licensed electrician can cut off the US plug and hardwire it to an ON/OFF switch. Furthermore the power adapter with 1.5m cable, it’s longer than others..
  • @Super Bright: 2000LM daylight white led light bar, the whole set around 24W power, as a replacement for traditional light, its CRI003e80 super bright, it’s a perfect choice for your home lighting at kitchen, closet, shelf, display counter, showcase..
  • @Installation by yourself: Sufficient strong acrylic stickers, screws, wire clips, 2 in 1 splitter with Interconnect wires total in 1.8m,long enough extension cords(15cm and 50cm)will help you finish this led under cabinet lighting bar kit quickly and easily..
Check Stock