Reviews Led Current Control

DIANN 4 Sets RF Mini Wireless Remote Controller 11 Key with DC 5-24 V for 3528 5050 Single Color LED Strip Lights Wireless Switch Control Dimmer

  • Max Current: 6A (Recommended Current ＜6A).
  • Dynamic Mode : 5 Types( Gradual Change , Signal Light , Strobe , Breathe , Candlelight ).
  • RF Remote Control LED Dimmer Can Control Brightness of LED Strip, Flashing, and Flashing Mode.
  • Mini RF Remote Controller for 5050 3528 5630 3014 Single Color LED Strip Lights.
  • Easy to Use:Connect the DC Power Source with the Single color LED Strip Lights Directly by the Dimmer,Easy to Operate,Connect Same Frequency,Turn Off the Remote Control, Press the "LIGHT" and "SPEED+" Keys within 5 Seconds, the Light Will Flash or Press the 'Speed +' and 'Speed-' at the Same Time Until the Light Bar Flashes, They Will Be Different Frequencies.
Check Stock

Miniature Current Switch,Current Sensing Switch,with Rails,Normally Open Amp Sensor Monitoring Relay AC 0-30A Detectable（M3050）

  • Multi-Purpose: M3050 AC with rails current sensing switch is specially designed and manufactured to solve AC current monitoring. It uses the principle of mutual inductance to sense AC direct current, isolate the AC current, output normally open or normally closed switch signals, and directly control various automated industrial equipment, such as flash lamps, buzzers, relays, microcontrollers or other power load equipment..
  • Upgrade: Compared with traditional transformers, thermal protectors and other devices, using this device can not only get more accurate and timely control, but also greatly simplify the design and reduce costs. Self-powered, no external power supply required. Input through current: 0-30A AC Rated load: [email protected] AC/DC..
  • High Performance: The switch has no limit on the number of times of opening and closing, and the response speed reaches the millisecond level. The hysteresis is less than 1% and can be used under strong magnetic conditions. Through structure design, isolation withstand voltage up to 2000V..
  • LED Indication: The action current is 0-30A AC, which can be adjusted by the potentiometer. The LED indicator light can easily and intuitively indicate the working status of the switch..
Check Stock

Current Sensing Switch/Relay,AC Current Sensing Switch 0-200A Normally Open Current Sensor Monitoring Relay,Linkage PLC Signal,Overload Controller M3080）

  • Multi-Purpose: M3080 AC current sensing switch is specially designed and manufactured to solve AC current monitoring. It uses the principle of mutual inductance to sense AC direct current, isolate the AC current, output normally open or normally closed switch signals, and directly control various automated industrial equipment, such as flash lamps, buzzers, relays, microcontrollers or other power load equipment..
  • Upgrade: Compared with traditional transformers, thermal protectors and other devices, using this device can not only get more accurate and timely control, but also greatly simplify the design and reduce costs. Self-powered, no external power supply required. Input through current: 0-200A AC Rated load: [email protected] AC/DC..
  • High Performance: The switch has no limit on the number of times of opening and closing, and the response speed reaches the millisecond level. The hysteresis is less than 1% and can be used under strong magnetic conditions. Through structure design, isolation withstand voltage up to 2000V..
  • LED Indication: The action current is 0-200A AC, which can be adjusted by the potentiometer. The LED indicator light can easily and intuitively indicate the working status of the switch..
  • ABS material: High-power MOS tube non-con....
Check Stock

Kit Accessories Controller + 44-Key IR Remote Control

  • ◆ Fit for RGB LED Strip Light: Suitable for 5050, 3528, 2835 RGB led strip light with 4-Pin connectors. Not for RGBW strips which has 5-pin....
  • ◆ IR remote control: The working range of the remote control is 30 feet.
  • please note that the remote control must be pointed at the controller....
  • ◆ Multi-function: has 12 kinds of static colors, brightness adjustment.
  • Static/ Flash/ Strobe/ Fade-change/ RGB Smooth-change.
  • ◆ Safe to Use: Input DC 24V, Max output current is 5.8A. The remote controller is Low voltage, Low heat, no radiation, it is safe and touchable.
  • ◆ 1 to 2 Controller: This led strip Controller can connector 2 roll led strip.
Check Stock

Current Switch, Self-Powered Current Sensing Switch SZC25-NO-AL-CH AC 0.5-50A Adjustable Normally Open Current Sensing Relay for Flash Buzzer Transformer Substation

  • ...CISION & STABLE PERFORMANCE】The product features high quality, high precision, stable performance and long service life. It has the advantages of high precision, more stable heart, and long service life. It is an ideal choice for automated industrial equipment and store monitoring..
  • 【WORKING PRINCIPLES】This AC current sensing switch is designed and manufactured to solve the AC current monitoring. It uses the principle of mutual inductance to sense the AC current through the AC, isolate the AC current, and output a normally closed switching signal to directly control various automated chemical equipment..
  • 【FAST RESPONSE & LED INDICATOR】The switch has no new limit, and the reaction speed reaches ms. The LED state indicator provides a convenient and intuitive representation of the operating status of the switch. Through-heart structure design, isolation withstand voltage up to 2000V..
  • 【SELF-POWERED SENSING SWITCH】Self-powered, no external power supply required, high-power MOS tube non-contact electronic switch. The operating current of 0.5-50A AC can be adjusted by the potentiometer..
  • 【WIDE APPLICATION】Widely used in substation, frequency conversion speed control device, inverter device, electrolytic plating, electric locomotive, street la....
Check Stock

weideer 4 String PV Combiner Box and 20A Solar Charger Controller 12V/24V Adjustable LCD Display for Solar Panel System

  • Product name:4 String PV Combiner Box with 3 Digit Combination Lock Mounting Plate(The current and voltage of each pin of the combiner box is up to 15A/250V DC.12V system up to 720W, 24V system up to 1440W, 48V system up to 2880W.) Product configuration:10Awg Cables.
  • 32A Fuse Holder Base.The fuse base has an LED indicator, if the fuse is burned out, the LED will light up.
  • 63A 2 Pole Miniature Circuit Breaker.Play the role of circuit protection and lightning protect.
  • Controller size:32.29mm*101.94mm*122mm/1.27in*4in* 4.8in.
  • Max.pv input power:260W(12V)520W(24V) Build-in industrial micro controller.
  • Large-screen LCD display/charging and discharging current display/cumulative power generation and discharge power query/ temperature display/light control + delay control/adjustable charge and discharge parameters, with power-off memory and other functions. Dual USB output, the maximum current of 2.5A.
Check Stock

4-20mA Generator, DROK Adjustable Signal Generator, DC 0-10V 0 4-20mA Current Voltage Analog Simulator for Value Adjusting PLC Panel LED Testing

  • AMP & VOLT DUAL SIGNAL GENERATOR: Multifunctional DROK signal generator kit is able to generate ampere & voltage by one module, which generate 0/4 – 20mA current signal and 0-10V voltage signal just by rotating a multi-cycle precise potentiometer, simple and handy..
  • CLEAR LED DISPLAY: Our 4-20ma signal generator has bright and clear 3-digit LED digital display screen, which can be used to monitor the output current and voltage. You just need to push the switch below the monitor easy to switch the display..
  • AMP & VOLT DISPLAY CALIBRATION: There are current and voltage display calibrating potentiometer on the back of the module. If the display is accurate, you can calibrate the display value of current voltage by yourself..
  • WIDE APPLICATION: Our signal adapter can be used as signal generator, valve adjustment, inverter control, PLC debugging, panel debugging, LED testing, simulating the output of transmitter..
Check Stock

BOAOSI 50W 6ohm Load Resistors LED Resistor H7 HID Relay Harness Adapter Anti Flicker Error Decoder Warning Canceller Pack of 2

  • Fixes Light Errors: 6 Ohm 50W LED Load Resistors will fix your LED lights problems such as blinker flash error, no flashing or burnt out bulb....
  • Controls Current Flow: 6 Ohm 50W LED Load Resistors will control the current flow in electrical circuits. It will put a specific amount of resistance....
  • High Quality: 6 Ohm 50W LED Load Resistors is made of high quality materials to sustain a long lasting usage..
  • Easy Imstallation: 6 Ohm 50W LED Load Resistors is easy to install, just connect one wire plug to original car and the other wire plug to lampholder.....
  • Wide Application: 6 Ohm 50W LED Load Resistors will work on any vehicle and can be connected across the turn signal bulbs to simulate the load of a....
Check Stock

NBpower 36V/48V 35A 1500W Brushless DC Square Wave Controller ebike Electric Bicycle Hub Motor Controller

  • 36V or 48V Universal (support both voltage).
  • Torque Simulation Square Wave Controller (more stable, high efficiency, low current consumption, long life).
  • Support LED Control Panel or LCD Control Panel.
Check Stock

RGBZONE 2 Pack 11-Key RF Mini Wireless Remote Controller with DC Connector for Single Color 3528 5050 LED Strip Lights

  • Voltage: 12V DC,Output Current: 6A(Recommended current ＜6A).
  • 1 to 1 remote control pairing: auto save function, the same frequency.
  • turn off the remote control, press the "LIGHT" and "SPEED+" keys within 5 seconds, the light will flash or press the 'Speed' + and 'Speed' at the same time until the light bar flashes, they will be different frequencies..
  • Comes with 11 key Remote Control, very easy to operate.
  • Smooth Dimmer Effect. Speed and brightness adjustable.
  • Can be used to control LED single color strip lights.
Check Stock

24-bit LED Ring, 1pc 24 Bit WS2812 5050 RGB LED Ring Lamp Light with Integrated Drivers

  • Constant Current Drive: Each has a 18mA constant current driver, so the color is very consistent even if the voltage varies, and no external choke resistors are required to make the design slim. Amazing LED ring, you can use this LED ring lamp to DIY whatever you can think of.
  • Ideal for DIY: Each LED is addressable because the driver chip is inside the LED. So each pixel can have its own color and brightness as you wish.
  • Rings Connect: The LED ring lamp can be daisy-chained - connect the output pin of one to the input pin of the other.
  • Intelligent Protection: Use only one microcontroller pin to control as many as you can chain together, Intelligent reverse polarity protection, reverse power supply polarity will not damage the IC.
  • Bright LED: 24 ultra-bright smart LEDs are arranged in a circle with 3.3" (85mm) OD, power (5VDC recommended) and ground pins available.
Check Stock

Casablanca Caneel Bay Indoor / Outdoor Ceiling Fan with LED Light and Wall Control

  • Casablanca Caneel Bay Indoor / Outdoor Ceiling Fan with LED Light and Wall Control.
  • CONTEMPORARY CEILING FAN: The modern rustic nautical Caneel Bay fan comes with LED light covered by painted cased white glass that will keep your home interior current and inspired.
  • MULTI-SPEED REVERSIBLE FAN MOTOR: Direct Drive motor delivers ultra-powerful airflow with quiet performance.
  • Change the direction from downdraft mode during the summer to updraft mode during the winter.
  • LED LIGHT KIT: Energy-efficient dimmable LED light bulbs let you control the lighting and ambiance of the living space.
  • The long lasting bulbs have longer lifespan than traditional bulbs.
  • WALL CONTROL: Turn the modern maiden bronze ceiling ceiling fan on/off and adjust the speed quickly and easily right from your wall switch.
Check Stock

Thermaltake TT Sync SATA Powered 9 Port Addressable LED Controller TT Premium Edition (Compatible with ASUS Aura Sync, GIGABYTE RGB Fusion and MSI Mystic Light Sync) CL-O015-PL00BL-A,1 Pack

  • SYNC THERMALTKAE PLUS PRODUCT WITH 5V HEADER RGB MOTHERBOARD : Control the lights of Thermaltake PLUS products directly from ASUS Aura Sync, GIGABYTE RGB Fusion and MSI Mystic Light Sync without installing any extra lighting control software.
  • SUPPORT ALL THERMALTKAE ADDRESSABLE LED PLUS PRODUCTS : Powerful enough to handle up to 9 addressable LED products.
  • THERMALTAKE ADDRESSABLE LED PLUS PRODUCTS : Floe AIO Cooler, iRGB PLUS PSU, Ring PLUS/Pure PLUS Case Fan, W4 PLUS CPU Block, PR22 D5 PLUS Pump and Reservoir Combo, Lumi PLUS LED Strip and so on.
  • CONVENIENT SATA POWER INPUT : Direct power from PSU ensures stability, reliability whilst preventing stray current.
  • Maximum rated current of the SATA port is 5A. If connected with Riing TRIO Fan : Up to 4 Riing Trio fans while adding other PLUS series products.
  • Up to 5 Ring Trio fans WITHOUT connecting other PLUS series products.
Check Stock