Reviews Juki 750 Z axis Motor

3-Axis 32-bit ARM Based CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling,Support 500W Spindle/NEMA23 Stepper Motor/Laser (A4988+Fan)

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock

Juki Industrial Lockstitch DDL Series Servo Motor, Table, LED Lamp.Assembly Required. DIY (DDL-5550 Made in Japan)

  • ...w) Hook: Automatic-lubricating full-rotary hook Lubrication: Automatic Lubricating oil: JUKI New Defrix Oil No.1 (equivalent to ISO VG7).
  • ✅SINGLE NEEDLE LOCKSTITCH AUTO-LUBRICATION OF HOOK HORIZONTAL AXIS HOOK AND BOBBIN ADJUSTABLE REVERSE FEED.
  • ✅It comes complete with sewing machine table and Electronic DC Servo Motor 1/2 H.P, 1 PHASE, 110 VOLT, 0 ~3300 RPM (Model DMS-550), everything (drawer, belt, tools,lamp and instruction manual) brand new,Thread Stand *Bobbin Winder *Oil Pan/Knee Lifter *Extra Bobbins *Extra Needles *Instruction Manual *Screw Driver* Machine Oil *Table top (size 48" x 20") *Heavy Duty Legs, *Table Top,*servo motor *V Belt Hardware.✅.ASSEMBLY REQUIRED.
Check Stock

ANNOYTOOLS ARM 32-bit 3-Axis CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling DRV8825 Standalone Driver,Support 500W Spindle/NEMA17/23 Stepper Motor/Laser Module

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock

60W Mini Rotating Lathe,12000RPM Metal Rotating Lathe,Mini Lathe Machine Lathe Machine Tools,for Wood Metal Glass Plastic Machining

  • ?¡¾PRODUCT PARAMETER¡¿ ?Motor Speed: 12000rpm ? Input Voltage/Current/Power: 12V DC/5A/60W ?Axis X travel: 32mm.
  • Axis Z travel: 145mm ?Max Diameter of Machined Material: 100mm ? Machining Accuracy: 0.05mm..
  • ?¡¾MAIN PARTS¡¿ Headstock, tailstock, long machine bed, big slider, small slider, motor blade, gear, connection block, belt cover etc. All of the parts are made of metal except belt cover..
  • ?¡¾GOOD PERFORMANCE¡¿Maximum motor power is 60W by using more powerful motor.With 0.02mm accuracy of scale lines, the hand wheel increases the precision of workpiece machining..
  • ?¡¾POWERFUL FUNCTIONS¡¿Motor case and headstock are jointed. Axis Z slider can spin 180¡ã.Center height is 75mm and distance between centers is 135mm, motor speed normally drops to 2000rpm when using the lathe to machine metal..
  • ?¡¾USE RANGE¡¿ Lathe tool is made of high speed steel material, which can machine soft metal, nonferrous metal and precious metal..
Check Stock

Official Creality Ender 5 Plus 3D Printer with BL Touch Auto-Leveling Dual Z-Axis Touch Screen and Glass Bed Large Printing Size 350x350x400mm

  • BLTouch Auto Bed Leveling Sensor: It can precisely measure the tilt of hot bed surface and offers Z axis leveling compensation. Saving your time and....
  • Equipped with Two Lead Screws on Z Axis: The hot bed was held stably on Z axis frames, no worry about bed wobbling and dropping, fewer points of....
  • Dual Y Axis Motors: Y axis dual shaft motor and down-shift Z axis, moving more smoothly, ensure high precision printing..
  • Easy to Assemble and Operate: Ender 5 Plus uses touch color screen for easy and quick operation. It comes with several partially assembled kits, very....
  • Extra Glass Plate: Add a tempered glass plate on the heated bed, which makes models are easier to be removed. It also makes the hot bed more flat and....
Check Stock

CNC Router Machine 2.2KW 4 Axis 6090 USB CNC Router Kit 3D Engraving Machine + VFD Water-Cooling Spindle Motor +Control Box + Handwheel, Ball Screw, with Limit Switch, US STOCK

  • ✅ [Powerful Performance] Spindle Speed: 24000RPM. Spindle motor: 2200Whigh-speed variable frequency spindle motor, ER20 chuck, matching 6mm collet. Working Speed :50-1500mm/min. Drive of Stepping motor: 0-3.5A adjustable four-axis drive. Variable-frequency Drive(VFD): AC110V, 0-400Hz(built-in Control box ) (Tips: The spindle motor must connect with the VFD. It cannot directly connect with the supply voltage (AC110V).).
  • ✅ [ROUTER 6090 Parameters] Model: CNC6090GZ. X,Y,Z Working Area: 900(Y) x 600(X) x 140mm(Z). Outside dimension: 1150x970x650mm(LxWxH). Working platform size: 1045x720mm(LxW). Frame Material：The whole machine used 6061 aluminum profiles. Max. Feeding height: ≤140mm(From base of Z axis to platform). X/Y/Z axis--- Ball Screws. Stepping motor: 57 Two-phase 3A 150N.cm..
  • ✅ [High Quality and Durable] Water Cooled Spindle Motor Can Work Longer Time Than Air Cooled Motor. Has Higher Stability And Better Concentricity Than Air Cooled Motor. High quality accurate ball Screws drive make the engrving more precision. Anti-blackflash, high precision, long life circle. (Note: Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.).
Check Stock

Comgrow ROBO Table CNC Router Machine with GRBL Offline Control,3-Axis Engraving Milling Machine 300x180x45mm Working Area for Carving Cutting Plastic Acrylic PCB PVC Wood Aluminum brass

  • 【Upgrade Comgrow CNC ROBO 】Comgrow cnc router 3 Axis 42 stepper motor are X/Y/Z Axis power, the axis moves more smoothly. 775 spindle motor up to 10000r/min. and comes with short circuit protection, no need to worry about module damage..
  • 【CUSTOMISED SETTINGS】Metal CNC machine cutter Full Aluminum Alloy tray Working area: 30x18x4.5CM. Meets most of the engraving needs.
  • 【AUTOMATIC TOOL-SETTING】CNC Router for metal aluminum copper can calibrate the zero of the Z axis autonomously, with the functioning of embedded sensors During the engraving process, there is no need to manually adjust the height of the Z axis to make the drill touch the surface of the engraved object.
  • 【 a wide range of projects and materials】the comgrow cnc router machine Capable of cutting and engraving all types of plastics, soft aluminum, Copper, woods, acrylics, PVCs, PCBs and MDF, the setting parameters of different materials can refer to the product page below middle"".
  • 【more Simply Assemble and Use】This table cnc router machine kit is mainly designed for DIY carving enthusiasts/beginners, easily assembled and opertated, coming with a paper manual and SD Card of all the files. Please let us know if you need any help ..
Check Stock

Juki Bobbin Case for TL Series Sewing Machines

  • Authentic Juki brand package of 5 plastic drop-in bobbins for all Juki household sewing machines except TL series..
  • Use with Juki Models: -HZL F600 -HZL F400 -HZL F300 -HZL G210 -HZL G110 -HZL K85 -HZL K65 -HZL 35Z -HZL 29Z -HZL 27Z.
Check Stock

Juki DNU-1541S Industrial Sewing w/Safety Mechanism DNU 1541 Walking Foot Needle Feed,servo Motor,Table,lamp DIY.

  • ✅ASSEMBLY REQUIRED, please note machine comes assembled, with sewing machine table and Electronic 550 watts Energy saver and Quite Running DC Servo....
  • ✅Juki DNU-1541S (with safety mechanism) 1-needle, Unison-feed, Lockstitch Machine with Double-capacity Hook.
  • ✅Juki DNU-1541 & DNU-1541S All the features of the 1508 at an economical price! Horizontal axis large hook, loads from the side. Replaces Juki....
  • ✅Applications -For sewing light to heavy-weight materials such as leather, vinyl, upholstery, synthetics, canvas and various coated and laminated....
  • ✅Included accessories in the machine head Juki DNU-1541S : Bobbin Winder, Thread Stand, Machine Oil, Instruction Manual, Oil Pan, Knee Lifter and V....
Check Stock

Official Creality Ender 3 Max Neo 3D Printer Upgrade Large Size FDM 3D Printers with CR Touch Auto Leveling Bed Filament Sensor Z-axis Double Screw Printing Size 302x300x320 mm

  • 【CR Touch Auto Bed Leveling】The CR Touch intelligent leveling system can automatically compensate the printing height at different points of the....
  • 【Power Loss Recovery and Filament Sensor】The Creality 3D Printers features the function of detecting filament runout or breakage/power loss and....
  • 【High-precision Dual Z-Axis Higher Printing Precision】With a Z-axis dual-screw+Z-axis dual-motor design, works smoother and more synchronously to....
  • 【Simple Quick Assembling 】96% of the printer body is pre-installed, making assemblingextremely convenient with only 3 steps and the maintenanceof....
  • 【12-months Parts Repair】Creality 3D printers are provided lifetime technical assistance and 12-months Parts Repair..
Check Stock

Official Creality Ender 3 Max Neo 3D Printer Upgrade Large Size FDM 3D Printers with CR Touch Auto Aux Leveling Bed Filament Sensor Z-axis Double Screw Printing Size 301x300x320 mm

  • 【CR Touch Auto Bed Leveling】The CR Touch intelligent leveling system can automatically compensate the printing height at different points of the....
  • 【Power Loss Recovery and Filament Sensor】The Creality 3D Printers features the function of detecting filament runout or breakage/power loss and....
  • 【High-precision Dual Z-Axis Higher Printing Precision】With a Z-axis dual-screw+Z-axis dual-motor design, works smoother and more synchronously to....
  • 【Simple Quick Assembling 】96% of the printer body is pre-installed, making assemblingextremely convenient with only 3 steps and the maintenanceof....
  • 【12-months Parts Repair】Creality 3D printers are provided lifetime technical assistance and 12-months Parts Repair..
Check Stock

Official Creality Ender 3 S1 Pro Direct Drive FDM 3D Printers with Auto Leveling Bed 300℃ high Temperature hotend Filament Sensor Spring Steel PEI Magnetic Build Plate Printing Size 220x220x270mm

  • 【"Sprite" Direct Dual-gear Extruder】Creality Ender-3 S1 Pro 3D Printer Equipped Brand-new self-developed "Sprite" direct dual-gear extruder....
  • 【CR Touch AUTO-Leveling bed 】Ender 3 S1 3D printer is equipped with CR Touch Sensor, which is indepently developed. The intelligent leveling....
  • 【Filament Breakage Detecting and Power Off Resume Printing】Ender-3 S1 Pro features the function of detecting filament runout or breakage/power....
  • 【High-precision Dual Z-Axis Higher Printing Precision】With a Z-axis dual-screw+Z-axis dual-motor design, Ender 3S1 Pro works smoother and more....
  • 【After Sale Worry-Free】Creality 3D printers are provided lifetime technical assistance and 12-months hardware warranty. Whenever or why, when....
Check Stock

Official Creality Ender 3 S1 Pro Direct Drive FDM 3D Printers with Auto Leveling Bed 300℃ high Temperature hotend Filament Sensor Spring Steel PEI Magnetic Build Plate Printing Size 220x220x270mm

  • 【"Sprite" Direct Dual-gear Extruder】Creality Ender-3 S1 Pro 3D Printer Equipped Brand-new self-developed "Sprite" direct dual-gear extruder....
  • 【CR Touch AUTO-Leveling bed 】Ender 3 S1 3D printer is equipped with CR Touch Sensor, which is indepently developed. The intelligent leveling....
  • 【Filament Breakage Detecting and Power Off Resume Printing】Ender-3 S1 Pro features the function of detecting filament runout or breakage/power....
  • 【High-precision Dual Z-Axis Higher Printing Precision】With a Z-axis dual-screw+Z-axis dual-motor design, Ender 3S1 Pro works smoother and more....
  • 【After Sale Worry-Free】Creality 3D printers are provided lifetime technical assistance and 12-months hardware warranty. Whenever or why, when....
Check Stock