Reviews Dual Z axis Kit

ELEGOO Neptune 3 Pro FDM 3D Printer with Auto Bed Leveling, Dual-Gear Direct Extruder, Dual Lead Screw Drive, Removable Capacitive Screen, 225 x 225 x 280 mm³ Large Printing Size

  • ...ne 3 Pro are driven by silent stepper motors for quieter and more precise movement during printing, which reduces the noise as low as 47-48dB. The easy-to-setup printer comes with the main components pre-assembled, as well as a complete tool kit for quick installation..
  • 【Dual-Gear Direct Extruder】The new dual-gear direct drive extruder is made of SUS303 high-quality stainless steel with a 3:1 reduction ratio and stronger extrusion force for smoother filament feeding and more stable & accurate printing, which greatly reduces nozzle clogging and under-extrusion issues, printing effect is better than Bowden extruder. Compatible with multiple filaments such as PLA, TPU, PETG, and ABS..
  • 【Nozzle Kit for Better Printing Effect】The nozzle kit contains a TC4 titanium alloy throat pipe, an aluminum alloy flat heat sink structure, and a brass nozzle.The widened aluminum heat sink paired with the front close-fitting efficient cooling fan for a better heat dissipation effect and lower the temperature of the throat pipe, thereby reducing the possibility of nozzle clogging..
  • 【Smarter Printing Experience】Auto mesh bed level....
Check Stock

Official Creality Ender 5 Plus 3D Printer with BL Touch Auto-Leveling Dual Z-Axis Touch Screen and Glass Bed Large Printing Size 350x350x400mm

  • BLTouch Auto Bed Leveling Sensor: It can precisely measure the tilt of hot bed surface and offers Z axis leveling compensation. Saving your time and....
  • Equipped with Two Lead Screws on Z Axis: The hot bed was held stably on Z axis frames, no worry about bed wobbling and dropping, fewer points of....
  • Dual Y Axis Motors: Y axis dual shaft motor and down-shift Z axis, moving more smoothly, ensure high precision printing..
  • Easy to Assemble and Operate: Ender 5 Plus uses touch color screen for easy and quick operation. It comes with several partially assembled kits, very....
  • Extra Glass Plate: Add a tempered glass plate on the heated bed, which makes models are easier to be removed. It also makes the hot bed more flat and....
Check Stock

Creality 3D Printer CR-10 S5 CR Touch auto Leveling 3D Aluminum DIY Printer with Resume Print Open Source Large Print Size 500*500*500MM

  • 【THE LARGEST CREALITY 3D PRINTER】 Creality 3D printer CR10 -S5 is the largest 3d printer. The Creality CR-10 S5 desktop 3D printer offers the....
  • 【CR TOUCH AUTO BED LEVELING SENSOR KIT】The Creality Largest FDM 3D printer CR10-S5 new version comes with CR touch. High Precision Intelligence....
  • 【DUAL Z-AXIS AND DUAL MOTOR】Creality CR10S 3d printer has Dual Lead Screw Z-axis design, give much stability and accuracy than single lead screw....
  • 【POWER LOSS RECOVERY AND FILAMENT SENSOR FEATURES】The function of CR10S-5 detecting filament run-out or breakage/power loss and resume printing....
  • 【SOLID GLUE STICK INCLUDED IN PACKAGE 】Creality CR10S 5 has comes with large hot bed, preheating time make longer than others, and there is the....
Check Stock

LulzBot KT-PR0051NA TAZ Workhorse 3D Printer

  • Belt driven Z-axis for fast cycle times and elimination of Z wobble..
  • X/Y/Z Backlash Compensation* for 3D printed part accuracy..
  • Lightweight tool head design for faster, better looking prints.
  • Pre-configured material profiles created by expert in-house technicians..
  • Dual Z-axis limit switches for automatic x-axis gantry leveling.
  • The industry’s widest array of supported materials with ready-to-print profiles.
Check Stock

Official Creality Ender 3 S1 Pro Direct Drive FDM 3D Printers with Auto Leveling Bed 300℃ high Temperature hotend Filament Sensor Spring Steel PEI Magnetic Build Plate Printing Size 220x220x270mm

  • 【"Sprite" Direct Dual-gear Extruder】Creality Ender-3 S1 Pro 3D Printer Equipped Brand-new self-developed "Sprite" direct dual-gear extruder....
  • 【CR Touch AUTO-Leveling bed 】Ender 3 S1 3D printer is equipped with CR Touch Sensor, which is indepently developed. The intelligent leveling....
  • 【Filament Breakage Detecting and Power Off Resume Printing】Ender-3 S1 Pro features the function of detecting filament runout or breakage/power....
  • 【High-precision Dual Z-Axis Higher Printing Precision】With a Z-axis dual-screw+Z-axis dual-motor design, Ender 3S1 Pro works smoother and more....
  • 【After Sale Worry-Free】Creality 3D printers are provided lifetime technical assistance and 12-months hardware warranty. Whenever or why, when....
Check Stock

Official Creality Ender 3 S1 Pro Direct Drive FDM 3D Printers with Auto Leveling Bed 300℃ high Temperature hotend Filament Sensor Spring Steel PEI Magnetic Build Plate Printing Size 220x220x270mm

  • 【"Sprite" Direct Dual-gear Extruder】Creality Ender-3 S1 Pro 3D Printer Equipped Brand-new self-developed "Sprite" direct dual-gear extruder....
  • 【CR Touch AUTO-Leveling bed 】Ender 3 S1 3D printer is equipped with CR Touch Sensor, which is indepently developed. The intelligent leveling....
  • 【Filament Breakage Detecting and Power Off Resume Printing】Ender-3 S1 Pro features the function of detecting filament runout or breakage/power....
  • 【High-precision Dual Z-Axis Higher Printing Precision】With a Z-axis dual-screw+Z-axis dual-motor design, Ender 3S1 Pro works smoother and more....
  • 【After Sale Worry-Free】Creality 3D printers are provided lifetime technical assistance and 12-months hardware warranty. Whenever or why, when....
Check Stock

Official Creality Ender 3 Max Neo 3D Printer Upgrade Large Size FDM 3D Printers with CR Touch Auto Leveling Bed Filament Sensor Z-axis Double Screw Printing Size 302x300x320 mm

  • 【CR Touch Auto Bed Leveling】The CR Touch intelligent leveling system can automatically compensate the printing height at different points of the....
  • 【Power Loss Recovery and Filament Sensor】The Creality 3D Printers features the function of detecting filament runout or breakage/power loss and....
  • 【High-precision Dual Z-Axis Higher Printing Precision】With a Z-axis dual-screw+Z-axis dual-motor design, works smoother and more synchronously to....
  • 【Simple Quick Assembling 】96% of the printer body is pre-installed, making assemblingextremely convenient with only 3 steps and the maintenanceof....
  • 【12-months Parts Repair】Creality 3D printers are provided lifetime technical assistance and 12-months Parts Repair..
Check Stock

Creality 3D Original CR-10 Dual Z Axis Leading Screw Rod Upgrade Kit

  • It is specially for Creality CR-10, The printer will be much more stable if you add this kit..
  • There will be an assembly instruction for you after buying it.
  • This kit is the original replacement parts for Cr-10..
  • Super easy to install. Original Parts from Creality 3D Printer Factory which with high quality.
  • Creality Orginal CR-10 Dual Z Axis Leading Screw Rod Upgrade Kit.
Check Stock

Official Creality Ender 3 Max Neo 3D Printer Upgrade Large Size FDM 3D Printers with CR Touch Auto Aux Leveling Bed Filament Sensor Z-axis Double Screw Printing Size 301x300x320 mm

  • 【CR Touch Auto Bed Leveling】The CR Touch intelligent leveling system can automatically compensate the printing height at different points of the....
  • 【Power Loss Recovery and Filament Sensor】The Creality 3D Printers features the function of detecting filament runout or breakage/power loss and....
  • 【High-precision Dual Z-Axis Higher Printing Precision】With a Z-axis dual-screw+Z-axis dual-motor design, works smoother and more synchronously to....
  • 【Simple Quick Assembling 】96% of the printer body is pre-installed, making assemblingextremely convenient with only 3 steps and the maintenanceof....
  • 【12-months Parts Repair】Creality 3D printers are provided lifetime technical assistance and 12-months Parts Repair..
Check Stock

ENOMAKER Ender 3 Dual Z Upgrade Kit,Dual Z Stepper Motor with Metal Power Supply Holder,Upgrade Stability 3D Printer Accessories for Creality Ender 3,Ender 3 Pro,Ender 3 V2

  • Ender 3 Dual Z Upgrade Kit is a perfect solution to avoid shaking on the X-gantry. Double z-axis work together to effetively improve the stability and....
  • Metal Power Supply Holder is more table and durable, while other kit might without power supply holder or plastic power holder..
  • High Quality Motor: efficient and reliable,smooth to slide..
  • Campatible for Creality Ender 3, Ender 3 Pro, Ender 3 V2 3D Printer..
  • Simple to install,easy operation, with Detail installation instruction together in the package..
Check Stock

Official Creality Ender 3 S1 3D Printer, Upgraded Direct Drive FDM 3D Printers, Quick Assembly, with Auto Leveling Bed, Dual Z-axis Screws, Spring Steel Print Bed, Build Size 220x220x270 mm

  • 【”Sprite” Direct Dual-gear Extruder】Creality Ender-3 S1 3D Printers Use Brand-new self-developed “Sprite” direct dual-gear extruder features two chrome steel gears . The extruder realizes smooth feeding and discharging of filaments without slipping and works extremely well in printing flexible filaments such as TPU. Compared with other direct extruders, the “Sprite” is lighter and features less inertia and more precise positioning..
  • 【CR Touch AUTO-Leveling bed 】Ender 3 S1 3D printer is equipped with CR Touch Sensor, which is indepently developed. The intelligent leveling system can automatically compensate the error height (accuracy ±0.04mm) at different points of the printing bed, which effectively improves the model printing quality and printing success rate, and makes leveling bed more easily more precise..
  • 【Power Loss Recovery and Filament Sensor】Ender-3 S1 features the function of detecting filament runout or breakage/power loss and resume printing after recovery. By accurately recording the printing data at the time of power outage/filament runout or breakage, it helps to avoid the waste of filaments and time caused by accidents..
  • 【High-precision Dual Z-Axis Higher Printing Precision】With a Z-axis dual-screw+Z-axis dua....
Check Stock

CREALITY Ender 3 S1 3D Printer (Upgraded Ender 3 V2) with Sprite Dual-Gear Direct Drive Extruder CR Touch Auto Bed Leveling Silent Board Filament Sensor Dual Z-axis High Precision 8.6x8.6x10.6inch

  • Sprite Direct Dual-Gear Extruder: The "Sprite" direct dual gear extruder developed by Creality 3D has two chrome steel gears that are switched with a gear ratio of 1: 3.5. With a force of up to 80N, the extruder achieves a smooth and even feed and extrusion of filaments without slipping and is ideal for printing flexible filaments such as TPU. With a weight of only 210g, the "Sprite" is lighter than other direct extruders and is characterised by lower inertia and more precise positioning..
  • CR Touch Auto Bed Levelling: The CRTouch 16-point auto levelling technology saves you from the effort of manual levelling. The intelligent levelling system automatically compensates for the print height of various points on the heated bed..
  • Removable PC Spring Steel Platform: The innovative printing platform is a combination of a PC coating, a spring steel plate and a magnetic plate that immediately adheres to the surface when it is detached. The PC coating ensures good adhesion and easy removal of the printed models by bending the surface..
  • Ultra-Quiet 32 Bit Motherboard：The brand new 32-bit silent board runs at low....
Check Stock

Official Creality Ender 3 S1 Pro 3D Printers with 300℃ High Temperature Hotend All Metal Direct Drive Extruder, CR Touch Auto Leveling Bed, Spring Steel PEI Build Plate, Printing Size 220x220x270mm

  • 【"Sprite" Direct Dual-gear Extruder】Creality Ender-3 S1 Pro 3D Printer Equipped Brand-new self-developed "Sprite" direct dual-gear extruder features two chrome steel gears . The extruder realizes smooth feeding and discharging of filaments without slipping and works extremely well in printing flexible filaments such as TPU. Compared with other direct extruders, the "Sprite" is lighter and features less inertia and more precise positioning..
  • 【CR Touch AUTO-Leveling bed 】Ender 3 S1 3D printer is equipped with CR Touch Sensor, which is indepently developed. The intelligent leveling system can automatically compensate the error height (accuracy ±0.04mm) at different points of the printing bed, which effectively improves the model printing quality and printing success rate, and makes leveling bed more easily more precise..
  • 【Filament Breakage Detecting and Power Off Resume Printing】Ender-3 S1 Pro features the function of detecting filament runout or breakage/power loss and resume printing after recovery. By accurately recording the printing data at the time of power outage/filament runout or breakage, it helps to avoid the waste ....
Check Stock