Reviews Isr Miata Exhaust

Mutazu Stainless Steel Aggressive Axle-Back Exhaust Muffler For Mazda Miata NB 1999-2005 Longitude mounting (MX3-023)

  • Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
  • i.e. Maximizing Smoothest High Exhaust Air Flow Rate / High Performance Racing Spec. Design.
  • Instantly Increases Horsepower/ Low End Torque / TIG Welded CNC Machine Flange for Resistance against Pressure and Corrosion.
  • Removable baffle / Aggressive Deep Sound while Ensures Smooth Exhaust Gas Flow / Fitments: 1999-2005 Mazda Miata NB with 1.8 litter Engine.
  • Muffler Exhaust Tips: 4" Round, Piping Inlet Size: 2.5" OD.
Check Stock

J2 Engineering J2-CBE-035 Cat Back Exhaust System [Compatible with 90-99 Mazda Miata]

  • 【FITMENT】Compatible with 1990-1999 Mazda Miata.
  • 【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Enhance Performence】Dyno proven to instantly increases 15 – 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Muffler & Diameter】Muffler tip type: rounded tip. Tip diameter (in): 4.5″. inlet/ outlet size (in): 2.25″. silencer included.
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

DNA MOTORING CBE-MM90 Stainless Steel Cat Back Exhaust System [Compatible with 90-97 Mazda Miata MX-5 1.6L/1.8L]

  • 【FITMENT】Compatible with 90-97 Mazda Miata MX-5 1.6L/1.8L.
  • 【Quality Construction】Made of High Quality 409 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Enhance Performence】Dyno proven to instantly increases 15 – 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Muffler & Diameter】2.5″ OD Inlet / 2.5″ OD Main Piping.
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

Cisco ISR4221/K9 Router

  • CISCO ISR 4221 (2GE,2NIM,4G FLASH,4G DRA.
Check Stock

DNA MOTORING CBE-MM90-BT Stainless Steel Cat Back Exhaust System [Compatible with 90-97 Mazda Miata MX-5 1.6L/1.8L]

  • 【FITMENT】Compatible with 90-97 Mazda Miata MX-5 1.6L/1.8L.
  • 【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Muffler & Diameter】2.5" OD Inlet / 2.5" OD Main Piping.
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

BRExhaust Stock Replacement Exhaust Kit For Mazda Miata MX-5 MX5 NA 1990 1991 1992 1993 1994 1995 - BRExhaust 106-0246 New

  • Fits, sounds and performs just like OEM - bolts on for an easy DIY installation, with no cutting or welding required. Longer exhaust pipes are replaced by multiple smaller sections, so they can be installed without having to remove axles or suspension..
  • Exhaust kits are manufactured from corrosion-resistant aluminized steel and include all the hardware, clamps and gaskets required for installation.
  • Leaves all emissions equipment intact, making it 50-state emissions compliant.
  • Fits 1990-1995 Mazda MX-5 Miata (chassis code NA).
Check Stock

MagnaFlow Cat-Back Performance Exhaust System Street Series Kit 15715 - Designed for the 1990-1997 Mazda Miata - 2.25in Main Piping, Single Straight Passenger Rear Exit, Polished 4in Exhaust Tip

  • MODERATE SOUND/STREET SERIES - Street Series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels. Fast-flowing mandrel bent pipes with larger or more straight-through mufflers reduce exhaust restriction and enable that MagnaFlow performance tone without garnering racecar levels of attention. Specifically designed for the 1990-1997 Mazda Miata.
  • CAT-BACK PERFORMANCE - Extensive testing and dyno-proven power make this exhaust truly developed for the driven. It is designed to replace the original exhaust components following the catalytic converter. These systems are 50-state legal and designed to optimize power based on the factory calibration.
  • BOLT-ON INSTALLATION - MagnaFlow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment. CNC precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation.
  • STAINLESS-STEEL CONSTRUCTION - Highly corrosion resistant, Stainless-Steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity. Built to be the exhaust that lasts the lifeti....
Check Stock

MOSTPLUS Full Coilovers Struts Compatible with 1990-1997,1999-2005 Mazda Miata MX5 NA NB Adjustable Height Shock Absorber Assembly (Set of 4)

  • [Application] — Compatible with 1990-1997 Miata Base 2D.
  • Compatible with 1994-1997 Miata M Edition 2D.
  • Compatible with 1999 Miata 10th Anniversary 2D.
  • Compatible with 2000-2005 Miata LS 2D NA6 NA8 NB1 NB2. [ NOTE: These Coilovers Strut will “Lowering your car” about 5~10CM, DOES NOT keep to Original Ride Height ].
  • 20MM Rod with full dust cover will protect the damper and prolong usage time..
  • [Package Including] — 2 pieces Front & 2 pieces rear, 2 Stainless Steel Wrenches, 2 clips. Installation Included, professional installation is highly recommended.
  • 45° Adjustable Camber plates / top mounts:Yes.
  • [Twin-tube Structure] — The twin-tube has longer stroke and higher height adjustability than mono-tube construction, it provide more comfortable riding experience by reducing the pressure and minimizing friction and ensuring sufficient travel with less effort.
  • [Material] — Most components are made from 6063 aluminum with T6 to increase hardness — Excellent streng....
Check Stock

Red Hound Auto 4pc Exhaust Insulators Reduce Vibration Compatible with Acura Legend Integra Honda Civic & More - Hanger Check Listing for Full Application Details

  • 4 Red Hound Auto Premium Exhaust Insulators.
  • Note: Some applications vary by specific engine sizes, so it is important to check compatibility/application notes to confirm it will fit your model and/or engine size.
  • Compatible with Ford/Mazda/Saturn/Honda/Acura: CL 1997-1999 (3.0L), EL 1997-2003, Integra 1986-2001, Legend 1986-1995.
  • Escort 1991-2003, Accord 1976-2016, Civic 1980-2005, Prelude 1979-2001, 323 1986-1994, Miata 1990-1997, SL 1991-2002.
  • Premium Heavy Duty Automotive Grade Rubber.
Check Stock

Totally Covers Compatible with 1990-2000 Mazda MX-5 Miata Seat Covers: Black and Red (22 Colors) Bucket

  • A set of black and red seat covers for a 1990 to 1998 Mazda Miata..
  • High quality cotton material with a three-layered construction for durability. Foam padding for comfort and protection to the vehicle's seats..
  • Machine washable on cold cycle and drip dry. Do not machine dry..
  • Compatible with: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998 Mazda MX-5 Miata..
  • 30-Day Money Back Guarantee: Will fit your Mazda MX-5 Miata seats or your money back..
Check Stock

TOTALLY COVERS Compatible with 2006-2015 Mazda MX-5 Miata Seat Covers: Black (22 Colors) Seat Belt Holder & Side Airbag Compatible Bucket

  • A set of black seat covers for a 2006 to 2012 Mazda Miata..
  • Seat belt holder and side airbag compatible..
  • High quality cotton material with a three-layered construction for durability. Foam padding for comfort and protection to the vehicle's seats. Machine washable on cold cycle and drip dry. Do not machine dry..
  • Compatible with: 2006, 2007, 2008, 2009, 2010, 2011, 2012 Mazda MX-5 Miata..
  • 30-Day Money Back Guarantee: Will fit your Mazda MX-5 Miata seats or your money back..
Check Stock

ClutchMaxPRO Performance Chromoly Clutch Flywheel Compatible with 1990-1993 Mazda MX-5 Miata 1.6L 1994-2005 MX-5 Miata 1.8L 2004 2005 Miata Mazdaspeed NA6 NA8 NB (CPLSF10045)

  • ...lutchMaxPRO products comes with excellent customer support and limited manufacturer warranty of 12 months or 15,000 miles that covers issues related to performance, fitment and function. Buy with confidence!.
  • THE FOLLOWING PRODUCT IS COMPATIBLE WITH: 1990 - 1993 Mazda MX-5 Miata (1.6L DOHC 4cyl NA6.
  • must be used with 1994+ miata clutch), 1994 - 2005 Mazda MX-5 Miata (1.8L DOHC 4cyl NA8, NB), 2004 - 2005 Mazda MX-5 Miata Mazdaspeed (1.8L DOHC 4cyl Turbo MSM).
Check Stock

Rear Muffler - Compatible with 1990-1995 Mazda Miata 1.6L 1.8L 4-Cylinder

  • Compatible with or fits: 1994 - 1995 Mazda Miata 1.8L 4 Cyl | 1990 - 1993 Mazda Miata 1.6L 4 Cyl.
Check Stock