Reviews Exhaust Manifold To Exhaust Pipe Seal

Remflex 8002 Universal Exhaust Gasket, (Set of 2)

  • Universal 3” Collector Flange, 3 Bolt Holes, 3-3/8" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

GPP Exhaust Manifold Kit Set Compatible with 1999.5-2003 Ford 7.3L Powerstroke Diesel

  • (2) Studs (manifold to exhaust pipe flange).
  • (2) Nuts (manifold to exhaust pipe flange).
  • Interchange P/N: F81Z9431AA, F81Z 9431 AA, F81Z9430AA, F81Z 9430 AA.
Check Stock

PowerStroke Turbo Diesel Exhaust Manifold Bellowed Up Pipes Kit Compatible with Ford 1999-2003 7.3L 679-005 F-250 F-350 Super Duty

  • PowerStroke Turbo Diesel Exhaust Manifold Bellowed Up Pipes Kit  ---Replace the factory exhaust feed system (exhaust manifold to the turbocharger)....
  • Turbocharger Up Pipe Kit Works fit for Ford 7.3L powerstroke turbo V8 diesel models only! Such as: 1999 2000 2001 2002 2003( for Ford )F-250 Super....
  • Function - Direct replacement, Turbocharger Up Pipe Kit replaces the vehicle's factory installed exhaust manifold,Rust-resistant for long-lasting....
  • OE#:  679-005,F4TZ6K854C, F4TZ6K854F, F81Z6K854EA, F81Z6K854FA, F81Z6N632AA, F8TZ6K854AA.
  • include - 1 x Set of Turbo Diesel Exhaust Up Pipe All....
  • IMPORTANT NOTE - This Turbocharger Up Pipe Kit is designed to replace an original Turbocharger Up Pipe Kit with these exact options. If you do not....
Check Stock

2" Exhaust Clamps Narrow Band Muffler Seal Clamp Exhaust Tip, Exhaust Resonator, Exhaust Manifold, Exhaust Flex Pipe, Project Catalytic Converter Repair Stainless Steel 2.0 inch 2PCS

  • 【Application】Seal exhaust clamp is the muffler repair part, narrow strap clamp can be used for Catalytic Converter, Exhaust Tips, Exhaust Manifold, Exhaust Resonator, Exhaust Flex Pipe, Exhaust Muffler Repair Projects..
  • 【Function】The narrow band clamp adds the mild steel semi-circular gasket parts, it can hold the pipe tightly without loosening. Distributes the cla amping force evenly over the entire 360° to prevent leaks and control material distortion. Unique seal and high clamp loads are provided, without distorting your exhaust components, allowing the flexibility to disassemble for service..
  • 【Easy to Install】Easy and less time consuming to install or remove with one bolt. This exhaust clamp is adjustable, has been tested for strength, and is reusable without damaging the pipes..
  • 【Service】100% satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

Exhaust Flapper Water Shutter for Mercruiser 807166A3 Y-Pipe 1982-1996

  • Exhaust Water Flapper for Y-Pipe Exhaust Mercuiser.
  • Replaces Part#: 807166A3 / Sierra 18-2732-9.
  • Fits Mercruiser: V6 / V8 with 4" Y-Pipe & Round Pin Holes 1982-1996.
  • Fits into the Y-Pipe on most V6 & V8 models 1982-1996. Prevents water from backing into the manifold. Not for 4.3L Models with 1 piece manifold.
  • OE quality aftermarket replacement, Exact item pictured.
Check Stock

Remflex 3003 Exhaust Gasket for Ford V8 Engine, (Set of 2)

  • 1-1/8 inch width x 1-1/2" height Stock Square Port.
  • Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

3 Inch 2 x Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Universal butt joint band 3.0" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes..
  • Universal butt joint exhaust clamp fit for 3.0" OD pipe to 3.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Stainless steel clamp with great performance in anti-corrosion Stainless steel clamp with great performance in anti-corrosion.
Check Stock

Exhaust Manifold Gasket Spring Rebuild Kit with Clamp for Polaris Ranger RZR 800 2008-2010 Replaces 3610047 7041687 7041804 5811511

  • 【Top quality materials】Made of high temperature resistant graphene material. Strong airtightness, can withstand 800-1000 degrees, more durable than the original..
  • 【Why need to replace】Extreme temperatures, oil and coolant contamination, and constant exhaust blockage can wear out gaskets and cause leaks between the cylinder head and manifold..
  • 【Fitment】Replacement for P-olaris Ranger 700 (Does NOT fit Crew or 6x6) 2009.
  • For P-olaris Ranger 800 Full Size (Including Crew) 2010-2012.
  • 【Replaces part number 】3610047, 5811511, 7041687, 5250091 7041789.
  • 【Package includes】2 exhaust manifold gasket, 3 Exhaust Gasket Seal, 9 Exhaust Spring.
Check Stock

Remflex 2008 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - 4.8L, 5.3L, 6.0L LS2 ('99-'08), 5.7L, LS1 LS6 ('97-'08), includes Vortec, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1440.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Exhaust Manifold Bolt Repair Kit Compatible with GM Trucks & SUV's（1999 & Newer ）With a 4.8, 5.3, 6.0 or 6.2 L

  • No need to remove broken bolts, The exhaust manifold bolt repair kit will repair the exhaust leak without having to remove the cylinder head or drill out and replace the broken end bolts.
  • Install this part is to repair the driver's side front or the passenger side rear corner broken exhaust manifold bolts.
  • Exhaust manifold repair kit compatible with Trucks & SUV's (1999 & Newer) With a 4.8, 5.3, 6.0 or 6.2 L.engine size..
  • Material: Exhaust manifold repair brackets made of carbon steel, exhaust manifold bolt repair brackets will not fail like the bolts do from heat and expansion of the manifold.
  • We value your shopping experience, If you encounter any problems in installing the exhaust manifold stud repair kit, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

SYKRSS 2.0' Stainless Steel Butt Joint Exhaust Seal Band Clamp

  • Universal butt joint exhaust clamp fit for 2.0" OD pipe to 2.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, It is removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Full clamping area to create the best seal available without distorting pipe, muffler inlets, outlets, elbow joints, flex tubing and other system connections.
  • The butt joint exhaust clamp is made in stainless steel material, not easy to rust, corrosion resistance.
  • SYKRSS is the responsible brand, strive to offer a high-quality product and service. if you encounter any problems during the installation process, feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock