Reviews Iron stainless Steel Wire

JEDIST Flush Cutter, Sprue Cutter, Micro Cutter, ESD Wire Cutter, Stainless Steel Cut Tools with Spring Silicone Handle for Electronics Jewelry Model Craft Soldering Metal Plastic(Jed-05ESD)

  • The type of Jed-05ESD is a universal flush cutter tool. It is a anti-static and demagnetized ESD flush cutter which made of martensitic stainless steel and designed a inverted V-shape edges. The thickness of steel plate is 0.12 inch and the length of cutting edge is 0.51 inch. The rigidity is HRC56-58 and the weight is 2.47 oz. It can cut through copper wire with diameter of 1.3mm and iron wire with 1.0mm. It can cut above 10 AWG stranded electrical wire..
  • This wire cutter is made of martensitic stainless steel (8Cr13MoV).The steel is hardened through heating and quenching. This technology helps to enhance sturdiness and gives it a natural level of resistance against rust and corrosion even in marine, high temperature and humidity environment. The body of steel is heat-treated and bright-treated in vacuum and acid-free condition and its rigidity is 42-50HRC. The blade is heat-treated by high frequency wave and its rigidity is 56-58HRC..
  • The handle of flush cutter is ergonomically made. The cover of cutter grip is made of silicon which is non-slip and flexible. This sprue cutter is loaded a stainless steel spring that returns the jaws to the open position automatically and the joint is lubricated by oil. The cutting blades are perfectly aligned and the ....
Check Stock

Amico MTS-165, 165 Amp MIG/Flux Cored Wire, TIG Torch, Stick Arc DC Inverter Welder 3-IN-1 Combo Welding, 110/230V Dual Voltage.

  • MTS-165 capable of welding up to 1/4" aluminum, alloy, mild steel, weld steel, stainless steel, copper and cast Iron. It can work well with aluminum wire, solid wire and flux cord wire, it also has the TIG Torch and STICK function..
  • Advanced IGBT technology, featured wave-form control system, perfect waveform of volt and amp during, short circuits and arc burning cycles..
  • Synergic controlled, very clear wire melting droplet transfer, very few spatters. fast, precise, clean arc ignition and arc ending..
  • Using high quality wire feeding machine(iron) to ensure smooth wire feed, especially when using aluminum wire welding aluminum, with 2T/4T torch control. automatic control gas solenoid valve has been installed inside the machine..
  • Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection, automatic temperature control, fan dormancy, steeples amperage control..
Check Stock

DGOL Stainless Steel Mini Portable Metal Sheet Thickness Gauge Material Wire Thickness Gage

  • DGOL METAL SHEET THICKNESS GAUGE IS A GREAT TOOL TO GAUGE NON-FERROUS WIRE AND METAL SUCH AS COPPER,BRASS,ALSO GAGING UNCOATED SHEET,PLATE IRON AND STEEL.
  • MATERIAL: STAINLESS STEEL WITH GOOD FINISH,CLEAR AND EASY TO READ LETTERS AND NUMBERS.
  • WHY YOU SHOULD CHOOSE OUR GAUGE.1:OUR GAUGE IS MADE OF STAINLESS STEEL,NOT IRON OR NORMAL STEEL,MOST PRODUCT IN MARKET ARE MADE OF IRON OR STEEL.. 2: THE NUMBERS AND LETTERS ARE VERY CLEAR AND SHINNING.
  • SMALL GAUGE, NOT AS BIG AS YOU THINK, LENGTH IS 2.88"(7.3 CM), WIDTH IS 1"(2.54 CM).
  • THE THICKNESS GAUGE PROVIDE QUICK AND ACCURATE MEASURING,A GREAT TOOL FOR WELDER,MINI GAUGE,PORTABLE TO CARRY AND EASY TO USE.
Check Stock

TooTaci Turnbuckle Wire Tensioner Strainer Kit with 100ft Stainless Steel Coated Wire Rope,1/16\ Steel Cable,Turnbuckles for Cables Wire,for Garden Wire,Picture Wire,Strings Light Hanging,Shade Sails

  • 【Turnbuckle and Cable Kit】-- Comes with 100ft/30M Stainless Steel Metal Cable Wire Rope 1/16 , 5× M5 Turnbuckle hook and eye.
  • 20× 1/16 Wire Rope Crimping Loop Sleeves ..
  • 【Stainless Steel Cable Wire Rope】-- 1/16 Vinyl Coated Wire Rope made of 304 stainless steel, This cable bare OD is 1.5mm，Coated OD is 2mm.
  • Stainless Steel Cable Wire Rope offer corrosion resistance, durability and strength rather than galvanized wire.
  • cable wire with 7x7 construction consisting of 7 groups of 7 strands braided together.
  • stainless steel cable wire provide longer service time on project..
  • 【Turnbuckles for Cables Wire 】-- Heavy Duty M5 Hook and Eye Turnbuckle Kit made of 304 stainless steel ,Aluminum Crimping Loop Sleeve made of Aluminum ,offers good corrosion resistance and rust resistance,stainless steel turn buckle/ tension hook and eye for tightening up cable & wire rope allow you to use in any weather and anywhere !.
  • 【 Easy To Use】:1/16 Stainless Steel Wire Rope requires cable cutters.
  • 1/16 Wire Rope Crimping Loop requires crimping tool to fasten and tighten wire.
  • and 1/16 wire rope thimbles prevent wire rope wears, extend the service time for project.and the turnbuckle is adjustable ,conne....
Check Stock

Multifunctional Axe Hammer Car Lifesaving Hammer Broken Window Multifunctional Portable Tool Safety Hammer

  • Stainless steel material 2Cr16, professional blackening, strong corrosion resistance. High hardness, easy to deal with all kinds of hard objects..
  • High carbon steel hammer head with high hardness. The clamp head easily cuts the iron wire. The axe easily cuts off wood branches and so on..
  • Material: stainless steel 2Cr16 blackened + wood chip handle/aluminum chip handle.
  • Using blackening process, stainless steel 2cr16 material.
  • Curved claw head, used to pry nails, etc..
Check Stock

Turnbuckle Lsqurel 10PCS 304 Stainless Steel Turnbuckle Hook and Eye Heavy Duty M4 M6 M8 M10 Tensioner Adjustable Shade Sail Hardware for Tightening up Metal Cable Wire 5/32 1/4 5/16 3/8

  • ▶PRODUCT SPECIFICATIONS - M8 turnbuckle hook & eye, max length 11.3 inch, min length 7.4 inch, adjustable length: 3.9 inch. It weigh: 4.8oz/135g (1pc)..
  • ▶HEAVY DUTY - Maximum load 440 lb/200kg..
  • ▶304 STAINLESS STEEL - Lsqurel turnbuckle made of genuine 304 SS, which includes 69% iron, 19% chromium, and 9.5% nickel. High hardness, anti-rust, durability, weak-magnetic..
  • ▶CABLE SPECIAL - These heavy duty turnbuckle is a perfect wire tensioner, suitable for tighten metal wire, steel cable, cables wire etc.
  • Easy to use with a simple twist to increase/reduce tension, allows for tensioning the cable for a tight and tidy look!.
  • ▶APPLICATION - This stainless steel turnbuckle is easy to use and widely applied. It can be perfect for fence wire tensioner, garden wire tensioner, cable railing tensioner, clothesline tensioner, sun shade sails turnbuckle etc..
Check Stock

E-Z Lok Threaded Insert, 18-8 Stainless Steel, Helical, #6-40 Internal Threads, 0.138\ Length (Pack of 10)

  • THREADED INSERT FOR METAL – E-Z LOK Coil Thread Inserts for metal. Also known as wire thread inserts or helical threaded inserts..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this steel thread insert..
  • 18-8 STAINLESS STEEL WIRE – 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Before installation, the metal threaded insert diameter is larger than the hole and then reduced during installation..
Check Stock

Saker Soldering Iron Kit,60W 110V Corded Electric Welding Gun with Welding Wire,One-handed Operation for Soldering Circuit Boards,Electrical Maintenance,Computers and DIY

  • NEW DESIGN:Saker soldering iron kit the design of the side can always observe the internal operation,it is also convenient to replace the heating core in the future,stainless steel casing,anti-corrosion and more durable..
  • INTEGRATED POWER SWITCH:Saker soldering iron kit has an integrated power switch,which is more energy-saving,safe to operate and use,and does not need to be plugged and unplugged frequently every time..
  • EASY TO USE:When the hand saker soldering iron kit is used for the first time,it must be preheated for a few minutes.It is normal to have smoke,and it will disappear in tens of seconds. Straighten the rated tin wire,press the tin inlet,and insert it from the tin inlet until it contacts the soldering head,until it touches the soldering iron head,stop threading until the tin wire is sent to the tin guide pipe mouth,and then pull the trigger to work normally..
  • ONE-HANDED OPERATION:Saker soldering iron kit feeds the Welding wire through a stepper motor,allowing you to solder effortlessly with one hand Without feeding solder with the other hand,When it is necessary to withdraw or replace the tin wire when it is stopped,just push the plate direction upwards and take out the tin wire at the same time..
Check Stock

TooTaci Wire Trellis Kit/Heavy Duty Picture Wire,1/16

  • Cable with Turnbuckle Kit-- Comes with 1/16 "PVC Coated Cable Wire Rope 50ft, 2pcs M5 Hook and Eye Turnbuckle, 4pcs M2 Wire Rope Thimbles, 4pcs M5 Wire Eye Straps, 8pcs M2 Aluminum Crimping Loop..
  • 1/16 Stainless Steel Cable --1/16 " Vinyl Coated Wire Rope Cable made of 304 stainless steel , This cable bare OD is 1.5mmCoated OD is 2mm.
  • Stainless Steel Cable Wire Rope offer corrosion resistance, durability and strength rather than galvanized wire.
  • cable wire with 7x7 construction consisting of 7 groups of 7 strands braided together.
  • stainless steel cable wire provide longer service time on project..
  • Turnbuckles for Cables Wire -- M5 Stainless Steel Turnbuckle Kit for 1/16" Wire Rope all made of 304 stainless steel ,Aluminum Crimping Loop Sleeve made of Aluminum ,offers good corrosion resistance and rust resistance, Turn buckles Kit for tightening up metal cable allow you to use in any weather and anywhere !.
  • Convenience for Operate:Need wire cutters for freely cut the length you want.
  • M2 Aluminum Crimping Loop just need use crimping tool to fasten and tighten wire.
  • and the stainless steel thimble prevent wire rope wears, extend the service time for project.and the turnbuckle is adjustable ,connection between the wood screw and wire.easy to install ....
Check Stock

Mardatt 8\ 6 Function MIG Welding Pliers, Dual-Sided Gage Standard Metal Gauge Measurement and Tungsten Carbide Scriber for Metal Sheet (3 Pack)

  • ...tooth pattern provide it strong clamping force, the jaws are very sharper and firmer, which improve efficiency. Multiple jaws for SIX Function: wire cutting, tip removal & installation, nozzle removal & installation, inside & outside nozzle cleaning, grooved tips for drawing wire..
  • Practical Welding Gauges: Made of stainless steel with rust and corrosion resistance for long service time. It has more clear scales and easy to read the data.with laser engraving procession, the scale is clear. And they will not wear out. Dual-Sided Round Wire Gauge, 0-36 American Standard (AWG) and SAE.
  • Ideal for measuring sheet, plate iron and steel, leather, wire, Bolt, screw, ect..
  • Handy Tungsten Cardie Tip Scriber：The glass scriber features a durable tungsten carbide tip and an aluminum body, which is twice as hard as steel, so it can easily handle hardened steel, stainless steel, ceramic, glass and other hard material.
  • Convenient pen design for easier and tighter holding and better control when using.
  • knurled aluminum handle provides maximum control and comfort.
  • convenient pocket-clip for keeping the etching carve tool handy..
  • Reliable and Friendly After-sale: Pls feel free contact me for any issues. Offer 12 hours quick response service for your satisfaction..
Check Stock

E-Z Lok Threaded Insert, 18-8 Stainless Steel, Helical, M8-1.25 Internal Threads, 8mm Length (Pack of 10)

  • THREADED INSERT FOR METAL – E-Z LOK Coil Thread Inserts for metal. Also known as wire thread inserts or helical threaded inserts..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this steel thread insert..
  • 18-8 STAINLESS STEEL WIRE – 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Before installation, the metal threaded insert diameter is larger than the hole and then reduced during installation..
Check Stock

AJIJING Grill Brush and Scraper,2 Pack BBQ Grill Cleaning Brush 18\ Stainless Steel Wire Bristle BBQ Grill Cleaner Brush Scraper Accessories for Gas Grill Weber Charcoal Porcelain Ceramic Iron Grill

  • SOLID STAINLESS STEEL WIRE : Compared with traditional nylon brushes, this grill brush and scraper are made of high-quality stainless steel wire and bristles , which can ensure that the food is 100% safe and bristles-free. It is an indispensable cleaning tool for barbecues..
  • 2 GRILL BRUSH HEADS FOR MULTIPLE CHOICES : Our grill brush comes with two different replacement brush heads, one is three-layer stainless steel spiral wire, the other is three-layer steel wire bristles, which is 5 X faster than ordinary grill cleaning brush and effortless to clean, and two replacements can meet your different needs..
  • EXTRA WIDE SCRAPER FOR FATER CLEANING : Compared with other bbq brush, our grill brush for gas grill has a stronger and wider scraper. It can help you clean up the hard stains that the brush can't remove, and will not deform, which is very convenient..
  • ERGONOMIC & ANTI-SLIP HANDLE : The long handle of this grill cleaner brush is ergonomically designed, comfortable and anti-slip handle grip can be well controlled, and it makes you clean without effort. In addition, the bbq brush for grill cleaning has a hook, if you don’t use it It can be hung up , easy for storage..
  • AFE FOE PORCELAIN AND ALL OTHER GRATES: This bbq grill brush are used for many purposes....
Check Stock

Dtacke Stainless Steel Deep U Groove Ball Bearings Pulley Metal Pulley Wheel Bearings Wheel Wire Rope Pulley for Lifting Guide 8mm/0.3 Inner Dia,Outside 40mm Diameter

  • Outer diameter is 40mm, Inner diameter is 8mm, Groove Width: 10mm ,Groove depth: 7.5mm , Load Bearing is 250kg..
  • Mainly made of iron, the middle bearing is made of bearing steel. Please don't hesitate to contact us First if ever a problem should arise,we'll do our best to help solve it! Wire pulley groove. Wide application. Especially suitable for Zip Line Trolley.
  • Application: steel wire rope wheel, transmission equipment, industrial pulley. This U groove pulley is made of bearing steel and good mute effect..
  • Material:Iron + Bearing Steel Package Content: 1 x Cable Pulley. Internal lubrication grease, smooth operation..
  • Note:In-line bearings can't be removed. Material:High quality stainless steel. Easy Installation & Replacement Less Friction & Durable.
Check Stock