Reviews Inconel Weld Neck Flange

Weld on Filler Cap, KIMISS Aluminum Alloy Weld On Oil Tank Filler Neck with Cap Filler Neck 1.5'' 1 1/2'' OD for Fuel Tanks Weld In Fuel Cell Cap Weld On Fuel Cap Fuel Filler Neck Aluminum Fill Cap

  • Scope of application: Weld On Billet Caps Aluminium Weld on Filler Neck does not need to be replaced frequently, with strong practical and durable. The filled neck with cover is suitable for oil tank, fuel tank, water tank, dry tank, etc. It is a high-quality, quality-guaranteed auto parts, and Fuel Filler Neck And Cap is your best purchase choice..
  • Product function: Weld On Fill Cap Fuel Filler Neck has smooth finished design, come with a O-shaped sealing ring and a natural aluminium screw on cap. Weld on Cap meets aviation hose fitting requirements, precision m....
Check Stock

Remflex 2048 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - 4.8L, 5.3L, 5.7L- LS1, LS6/6.0L- LS1, LS2 Vortec, 1-1/2" RP, For Weld Bead Headers, 2/Set.
  • additional sealing material is provided around the weld bead to provide a better seal.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Flex-Hone Tool CHC5818 Brush Research CH-C Large Chamfer Flex-Hone, Silicon Carbide, 5/8\ Diameter, 180 Grit (Pack of 1)

  • The Flex-Hone for Chamfer Blending has the ability to blend and radius sharp edges and remove microburrs on chamfered holes eliminating stress risers caused by the chamfering operation.
  • Designed to polish and radius the outer corners (the intersection of the chamfer and flange face) as well as the inner corners and hole.
  • Polished and radiused chamfer surfaces have been shown to be very beneficial on critical rotating parts.
  • Suitable for finishing titanium, inconel, super CVM and nickel based stainless steel alloys.
Check Stock

Remflex 2032 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • 1-1/4 inch width x 1-5/8 inch height Oval Port.
  • Chevy V8 -Small Block 262 - 400, 1-1/4" x 1-5/8" Oval Port, For Raised Weld Bead Headers , 2/Set.
  • additional sealing material is provided around the weld bead to provide a better seal.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Engine Elbow Adapter,90?? Elbow Adapter Exhaust Connection V?Band Clamp Stainless Steel 2.5in ID to 3.2in OD

  • Brilliant Compatibility:Engine Elbow Pipe For 2.5in/6.35cm ID 3.2in/8.13cm OD V-Band Flange.Manufactured according to the original specifications, which are very compatible with your model..
  • Good Replacement:90?? Flange Elbow Adapter Extremely good replacement on the market, can directly replace your old, broken flange elbow adapter.2.5in ID 3.2in OD V?band flanges on both sides, 90 degrees, with 2.5in pipeline..
  • Excellent Performance:Flange Elbow Adapter Connecting clamp have a good sealing function, if necessary, you can use welding process..
  • Easy to Install:90?? Elbow Adapter Easy to install, replace the old one directly, fix new one with a clamp, and weld if necessary.Practical and convenient in use.Such a practical tool you will need it..
  • Stainless Steel Material:Elbow Adapter Flange Clamp Precisely manufactured of high quality stainless steel material, durable, and long use life.Good quality not only can provide a safer guarantee for your life,but also good materials can increase product life..
Check Stock

Eastwood Perfect Panel Prep Tool 18 20 Gauge Sheet Metal TIG MIG Butt Welds Creates Clean Holes

  • Exclusive, Patent Pending, Design Provides A Perfectly Beveled 45° Weld-Prepped Edge In 20 Or 18 Gauge Sheet Metal.
  • Proper Weld-Prepped Edges Allow Strong, Flush, Crack-Free Welds In Sheet Metal.
  • Each Strike Forms A Perfect 0.062” X 45° Beveled Flange.
  • Achieve Solid, Full-Penetration Mig Or Tig Butt Welds.
  • Full Material Thickness After The Repair.
Check Stock

Eastwood Pneumatic Perfect Panel Prep Tool 18 20 Gauge Sheet Metal TIG MIG Butt Welds Creates Clean Holes

  • Exclusive Patent Pending Design, Which Easily Provides A Perfectly Beveled 45° Weld-Prepped Edge In 20 Or 18 Gauge Sheet Metal.
  • Proper Weld-Prepped Edges Allow Strong, Flush, Crack-Free Welds In Sheet Metal.
  • The Convenient Hole Punch Feature Provides Clean, Burr-Free 0.19” Holes.
  • Each Strike Forms A Perfect 0.062” X 45° Beveled Flange.
  • Achieve Solid, Full-Penetration MIG Or TIG Butt Welds.
Check Stock

Qiilu 2in Weld On Filler Cap Aluminum Alloy Weld On Filler Neck and Cap 2' Weld On Fuel Filler Neck with Cap Fuel Tank Parts Car Refitting(Black)

  • 2" Weld On Filler Cap --- This fuel filler neck and cap is suitable for welding on 2 inch inner diameter pipe interface. The weld on fuel tank filler neck and cap is easy to install, no need complicated tools, convenient and practical for using.
  • Superior Quality Aluminum Alloy --- The weld on fuel filler neck with cap is made of high‑quality aluminum alloy material, firm, anti‑rust, and durable in use. 100% brand new, please be assured of your purchase.
  • Professional Manufacturing --- The aluminum weld on filler cap has excellent mechanical stability and corrosion resistance for high reliability. Precision‑machined to exact tolerances for trouble‑free performance.
  • Size --- The cap diameter is about 58mm / 2.3in, cap height is about 15.5mm / 0.6in, overall height is about 81mm / 3.2in, bore is about 47mm/1.85in, neck outer diameter is 2in, neck thread and cap thread are M52x2.5.
  • Quality Assurance --- As a professional seller, we provide high quality products and considerate services. Every fuel filler neck must go through strict inspection to ensure reliable quality. Please rest assured to buy our products, hope you have a pleasant shopping experience.
Check Stock

Oatey 43551 Replacement Ring, for Use with 4 in Closet Flanges, 3-Inch or 4-Inch, Brass

  • 3 countersunk holes and 3 closet bolt slots for secure attachment to the floor.
  • 3-Inch Spigot Closet Flange fits inside the hub end of 3-Inch Schedule 40 DWV fitting.
  • 4-Inch Spigot Closet Flange fits inside the hub end of 4-Inch Schedule 40 DWV fitting.
  • Solvent weld into fitting-short throat length is perfect for use in tight spaces and where the fitting is close to the sub-floor.
  • Four mounting slots for proper fit and alignment of closet bolts to the toilet.
Check Stock

Dynabrade 52633 5-Inch 127 mm Diameter Right Angle Depressed Center Wheel Grinder, 1.3 HP, 12000 RPM, Side Exhaust, 5/8-Inch - 11 Spindle Thread,Teal

  • 1.3 hp Depressed Center Wheel Grinder is ideal for fast weld and stock removal, heavy deburring, plus rust and scale removal.
  • Tool accepts optional 5-Inch (127 mm) diameter Type 27 Depressed Center Wheels with 7/8-Inch (22 mm) center hole.
  • Includes 25215 Wheel Guard, 25262 Backup Flange and 53696 Locking Flange.
  • Tool also accepts optional 5-Inch (127 mm) diameter Abrasive Flap Discs (flanging sold separately). Vibration Dampening Side Handle included.
Check Stock

Dynabrade 52632 4-1/2-Inch 114 mm Diameter Right Angle Depressed Center Wheel Grinder, 1.3 HP, 12000 RPM, Side Exhaust, 5/8-Inch 11 Spindle Thread

  • 1.3 hp Depressed Center Wheel Grinder is ideal for fast weld and stock removal, heavy deburring, plus rust and scale removal.
  • Tool accepts optional 4-1/2-Inch (114 mm) diameter Type 27 Depressed Center Wheels with 7/8-Inch (22 mm) center hole.
  • Includes 25212 Wheel Guard, 25262 Backup Flange and 53696 Locking Flange.
  • Tool also accepts optional 4-1/2-Inch (114 mm) diameter Abrasive Flap Discs (flanging sold separately). Vibration Dampening Side Handle included.
Check Stock

Pulsar Turbo Systems GTX3071R GEN II Dual Ball Bearing Turbo Billet Compressor T3 0.63

  • 8 Blade Gen2 Billet Compressor Wheel with Extended Tapered Tip Technology.
  • .84 Trim high flow Inconel 713c turbine wheel, rated at 340-650hp, Max Air Flow rate: ~60 lb/min, rated @ 650 FWHP.
  • Gen2 Cover Integrated with the Speed Sensor Port.
  • Performance turbo for race applications with 1.8 – 3.0L engines.
Check Stock

3M 31801 Green Corps 1/2" x 18" 36 Grit Abrasive File Belt

  • Sanding belt for spot weld and hem flange removal.
  • Aluminum oxide minerals deliver a fast cut rate.
  • Abrasive belt made for increased durability and long-lasting service.
Check Stock