Reviews Sae Weld Flange

SAE Connector DC Power Extension Cable 16 AWG Automotive Battery Quick Disconnect Pigtail Wire Harness with Dust Cap (6 Pcs 1.2 Foot)

  • Application:SAE to SAE extension cable single head plug, with tinned ends. for solar battery, automotive, motorcycles, lawnmowers, truck power connection and transfer..
  • With Dust Cap: Protecting standard SAE type connector from rain and dust, which stay clean and dry inside when you don't use it..
  • Cable Specification: SPT-2, 16AWG/2C, 1.2 Feet. Heavy duty, thickness, flexible and durable..
  • Easy To Use: Standard SAE type plug, Fits most battery chargers with SAE quick release connectors, Tinned ends is easy to connect and weld..
  • Package: 6 pcs 1.2 Ft SAE pigtail wire power cable and 6 pcs dust cap..
Check Stock

Remflex 2048 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - 4.8L, 5.3L, 5.7L- LS1, LS6/6.0L- LS1, LS2 Vortec, 1-1/2" RP, For Weld Bead Headers, 2/Set.
  • additional sealing material is provided around the weld bead to provide a better seal.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 2032 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • 1-1/4 inch width x 1-5/8 inch height Oval Port.
  • Chevy V8 -Small Block 262 - 400, 1-1/4" x 1-5/8" Oval Port, For Raised Weld Bead Headers , 2/Set.
  • additional sealing material is provided around the weld bead to provide a better seal.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

0.5Mpa 1800r/min Gear Oil Pump, Insert Type Lubricating Cycloid Gear Pump Made of Iron(TOP-12A)

  • Chief Gear Pumps (3/4" DIA. Keyed Shaft).
  • SAE #12 Inlet and SAE #10 Outlet Ports, CW ROTATION.
Check Stock

Engine Elbow Adapter,90?? Elbow Adapter Exhaust Connection V?Band Clamp Stainless Steel 2.5in ID to 3.2in OD

  • Brilliant Compatibility:Engine Elbow Pipe For 2.5in/6.35cm ID 3.2in/8.13cm OD V-Band Flange.Manufactured according to the original specifications, which are very compatible with your model..
  • Good Replacement:90?? Flange Elbow Adapter Extremely good replacement on the market, can directly replace your old, broken flange elbow adapter.2.5in ID 3.2in OD V?band flanges on both sides, 90 degrees, with 2.5in pipeline..
  • Excellent Performance:Flange Elbow Adapter Connecting clamp have a good sealing function, if necessary, you can use welding process..
  • Easy to Install:90?? Elbow Adapter Easy to install, replace the old one directly, fix new one with a clamp, and weld if necessary.Practical and convenient in use.Such a practical tool you will need it..
  • Stainless Steel Material:Elbow Adapter Flange Clamp Precisely manufactured of high quality stainless steel material, durable, and long use life.Good quality not only can provide a safer guarantee for your life,but also good materials can increase product life..
Check Stock

Eastwood Perfect Panel Prep Tool 18 20 Gauge Sheet Metal TIG MIG Butt Welds Creates Clean Holes

  • Exclusive, Patent Pending, Design Provides A Perfectly Beveled 45° Weld-Prepped Edge In 20 Or 18 Gauge Sheet Metal.
  • Proper Weld-Prepped Edges Allow Strong, Flush, Crack-Free Welds In Sheet Metal.
  • Each Strike Forms A Perfect 0.062” X 45° Beveled Flange.
  • Achieve Solid, Full-Penetration Mig Or Tig Butt Welds.
  • Full Material Thickness After The Repair.
Check Stock

Eastwood Pneumatic Perfect Panel Prep Tool 18 20 Gauge Sheet Metal TIG MIG Butt Welds Creates Clean Holes

  • Exclusive Patent Pending Design, Which Easily Provides A Perfectly Beveled 45° Weld-Prepped Edge In 20 Or 18 Gauge Sheet Metal.
  • Proper Weld-Prepped Edges Allow Strong, Flush, Crack-Free Welds In Sheet Metal.
  • The Convenient Hole Punch Feature Provides Clean, Burr-Free 0.19” Holes.
  • Each Strike Forms A Perfect 0.062” X 45° Beveled Flange.
  • Achieve Solid, Full-Penetration MIG Or TIG Butt Welds.
Check Stock

GPI M-150S Fuel Transfer Pump, Economy Pump Only, 15 GPM Fuel Pump, Direct Mount (110240-02)

  • Chief Gear Pumps (5/8’’ DIA. Keyed Shaft).
  • SAE #12 Inlet and SAE #10 Outlet Ports, CW ROTATION.
Check Stock

Oatey 43551 Replacement Ring, for Use with 4 in Closet Flanges, 3-Inch or 4-Inch, Brass

  • 3 countersunk holes and 3 closet bolt slots for secure attachment to the floor.
  • 3-Inch Spigot Closet Flange fits inside the hub end of 3-Inch Schedule 40 DWV fitting.
  • 4-Inch Spigot Closet Flange fits inside the hub end of 4-Inch Schedule 40 DWV fitting.
  • Solvent weld into fitting-short throat length is perfect for use in tight spaces and where the fitting is close to the sub-floor.
  • Four mounting slots for proper fit and alignment of closet bolts to the toilet.
Check Stock

Dynabrade 52633 5-Inch 127 mm Diameter Right Angle Depressed Center Wheel Grinder, 1.3 HP, 12000 RPM, Side Exhaust, 5/8-Inch - 11 Spindle Thread,Teal

  • 1.3 hp Depressed Center Wheel Grinder is ideal for fast weld and stock removal, heavy deburring, plus rust and scale removal.
  • Tool accepts optional 5-Inch (127 mm) diameter Type 27 Depressed Center Wheels with 7/8-Inch (22 mm) center hole.
  • Includes 25215 Wheel Guard, 25262 Backup Flange and 53696 Locking Flange.
  • Tool also accepts optional 5-Inch (127 mm) diameter Abrasive Flap Discs (flanging sold separately). Vibration Dampening Side Handle included.
Check Stock

Dynabrade 52632 4-1/2-Inch 114 mm Diameter Right Angle Depressed Center Wheel Grinder, 1.3 HP, 12000 RPM, Side Exhaust, 5/8-Inch 11 Spindle Thread

  • 1.3 hp Depressed Center Wheel Grinder is ideal for fast weld and stock removal, heavy deburring, plus rust and scale removal.
  • Tool accepts optional 4-1/2-Inch (114 mm) diameter Type 27 Depressed Center Wheels with 7/8-Inch (22 mm) center hole.
  • Includes 25212 Wheel Guard, 25262 Backup Flange and 53696 Locking Flange.
  • Tool also accepts optional 4-1/2-Inch (114 mm) diameter Abrasive Flap Discs (flanging sold separately). Vibration Dampening Side Handle included.
Check Stock

3M 31801 Green Corps 1/2" x 18" 36 Grit Abrasive File Belt

  • Sanding belt for spot weld and hem flange removal.
  • Aluminum oxide minerals deliver a fast cut rate.
  • Abrasive belt made for increased durability and long-lasting service.
Check Stock

Dynabrade 52712 Diameter Right Angle Depressed Center Wheel Grinder, 2-Inch 51mm

  • Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.
  • 2" Diameter, Right Angle, .4 hp, Rear Exhaust. 20,000 RPM.
  • Includes 90999 Depressed Center Wheel (24 grit), 2" diameter with 3/8" center hole, guard and wheel flange set also included.
Check Stock